5,838
edits
FAQ: Difference between revisions
m
→Selecting a Weather Station sensor site
m (→Cumulus locks up when it starts and I have to use the task manager to kill it: Make option clearer) |
|||
|
=Selecting a Weather Station sensor site=
A simple guide is at [http://weatherfaqs.org.uk/node/124 uk.sci.weather newsgroup], note this advises against roof mounting.
For more advice see the website of your local Meteorological Bureau, an educational place (e.g. in USA see [http://newa.nysaes.cornell.edu/public/NEWAStationSitingGuidelines.htm Cornell University]), the [http://library.wmo.int/opac/index.php?lvl=notice_display&id=12407 World Meterological Organisation] (WMO), or a specialist organisation (e.g. in UK see [http://www.rmets.org/weather-and-climate/observing/guidelines-observing-0 Royal Meteorological Society] rather than the Met Office web site).▼
Modern Stevenson Screens are uPVC constructed with a black interior (so they do not radiate heat onto the sensors) and a white exterior (so they reflect as much radiation as possible). There is a lot of discussion on the [http://sandaysoft.com/forum/viewforum.php?f=16 Homebuilt forum] about different approaches to improving measurements, and the problems with out of the box instrumentation from the different manufacturers. ▼
Note: Some stations have all sensors in one unit, positioning of these is a compromise between the ideals for each sensor.▼
▲A good (portable document format) guide to all the conflicting siting standards is at [ftp://ftp.campbellsci.com/pub/outgoing/apnotes/siting.pdf Campbell Scientific].
If you are contributing to an external site like APRS/CWOP, Weather Underground, PWS weather, Weatherbug and/or WOW,
▲For more advice see the website of your local Meteorological Bureau, an educational place (e.g. in USA see [http://newa.nysaes.cornell.edu/public/NEWAStationSitingGuidelines.htm Cornell University]), the [http://library.wmo.int/opac/index.php?lvl=notice_display&id=12407 World Meterological Organisation], or a specialist organisation (e.g. in UK see [http://www.rmets.org/weather-and-climate/observing/guidelines-observing-0 Royal Meteorological Society] rather than the Met Office web site).
▲'''Note:''' Some stations have all sensors in one unit, positioning of these is a compromise between the ideals below for each sensor.
▲If you are contributing to an external site like APRS/CWOP, Weather Underground, PWS weather, Weatherbug and/or WOW, these destinations may offer site placement classifications.
== Where should I position the wind sensors ==
In the UK, the
If you are mounting on a building of height 'h' above ground level, ideally the wind sensor should be at a height of '1.5 times h' above ground level.▼
▲If you are mounting
If you are positioning away from a building or tree (or other object) of height 'h' (or the mean height of several objects is 'h'), then the distance away depends on which standard you are trying to meet, and can vary between 1.5 and 3 times 'h'.
▲In the UK, the recommended height is 10 metres. Advice varies on whether you should apply a correction factor for any lower height. Cumulus allows you to apply such a factor to either just wind speed, or wind speed and gust speed, by using the Calibration screen within the configuation menu. In the Cumulus Help it recommends that you also adjust wind chill - in practice this means ask Cumulus to ''calculate wind chill'' by selecting this in the settings frame on the '''station settings screen accessed from configuration menu''' (ignore any wind chill output by your weather station).
== Where should I position the rain sensor ==
The WMO says the rain gauge should at a distance away of 2 times the height of each nearby object (buildings, trees, walls, solid fences etc.) and just high enough off ground level to avoid possibility of splashing. You can experiment, but for amateurs, no more than a metre off the ground (or roof if mounted above it) and at least a metre from any chimney, wall or solid fence whose height exceeds that of the sensor seems good enough for most gauges. ▼
See [[Rain measurement]] or your local offical organisation.
== How do I protect my rain gauge against spiders or other natural problems ==▼
▲The WMO says the rain gauge should at a distance away of 2 times the height of each nearby object (buildings, trees, walls, solid fences etc.) and just high enough off ground level to avoid possibility of splashing. You can experiment, but for amateurs, no more than a metre off the ground (or roof if mounted above it) and at least a metre from any chimney, wall or solid fence whose height exceeds that of the sensor seems good enough for most gauges.
There is a lot of discussion on the [http://sandaysoft.com/forum/viewforum.php?f=16 Homebuilt forum]. In terms of siting, it is important to position your rain gauge where you can safely get to it.▼
▲== How do I protect my rain gauge against spiders or other natural problems ==
▲There is a lot of discussion on the [http://sandaysoft.com/forum/viewforum.php?f=16 Homebuilt forum].
== How do I get good temperature and humidity measurements ==
The international standard states ambient air temperature/humidity is measured at 1.25 metres above ground level, above soil or grass not paving, protected from direct sun radiation (and direct rain), unless you are measuring soil or ground temperatures.
▲The international standard states ambient air temperature/humidity is measured at 1.25 metres above ground level, above soil or grass not paving, protected from direct sun radiation (and direct rain), unless you are measuring soil or ground temperatures. Modern Stevenson Screens are uPVC constructed with a black interior (so they do not radiate heat onto the sensors) and a white exterior (so they reflect as much radiation as possible). An air frost is defined as a temperature below the freezing point for water at this height.
▲There is a lot of discussion on the [http://sandaysoft.com/forum/viewforum.php?f=16 Homebuilt forum] about different approaches to improving measurements, and the problems with out of the box instrumentation from the different manufacturers.
▲(If you are using a Fine Offset sensor, the thin depth of the thermonmeter/hygrometer (transmitter) should face where your console (receiver) is, for maximum transmission strength, so the wide face is at right angles to the transmission route).
== Pressure ==
== Solar ==
| |||