Cumulus.ini: Difference between revisions

From Cumulus Wiki
Jump to navigationJump to search
m (Minor clarifications in response to forum post)
 
(42 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<big>Please note this page was created 13 June 2021.
<big>Please note this page was created 13 June 2021.


At last update, it shows position as at build 3135.
At last update, it shows position as at beta build 3135, (missing some changes for the 3.12.0 release build of 3141).


This new page was created to reflect parameters added to Cumulus.ini in releases 3.8.0, 3.9.2, 3.10.0, and 3.12.0.  It excludes all parameters removed after release 3.7.0.</big>
This new page was created to reflect parameters added to Cumulus.ini in releases 3.8.0, 3.9.2, 3.10.0, and 3.12.0 (early beta builds - June 2021).  It excludes all parameters removed after release 3.7.0.</big>


{{Template:WorkInProgressBanner}}
{{Template:WorkInProgressBanner}}
Line 10: Line 10:
=Purpose of Cumulus.ini file=
=Purpose of Cumulus.ini file=


This is a text file containing initialization parameters. {{Template:Version badge Mx}}This page covers those used by the Cumulus MX software application.
This is a text file containing initialization parameters. {{Template:Version badge Mx}}This page covers those used by the Cumulus MX software applica3.2.0 to 3.5.4tion.


For MX there can only to be one '''Cumulus.ini''' file, and it must be stored in the same folder as the executable "CumulusMX.exe".   
For MX there can only to be one '''Cumulus.ini''' file, and it must be stored in the same folder as the executable "CumulusMX.exe".   
Line 20: Line 20:
* Control what is output to those destinations, to the extent that each can be configured
* Control what is output to those destinations, to the extent that each can be configured


== Why does this Wiki now contain multiple pages describing "Cumulus.ini"?==
 
 
= Why does this Wiki now contain multiple pages describing "Cumulus.ini"?=


[[Category:Configuration Files]]
[[Category:Configuration Files]]
Line 28: Line 30:
# Even more dramatic changes to the MX configuration have been happening since 3.8.0, with the biggest changes at 3.9.2, 3.10.0, and 3.12.0; therefore, <big>the decision was taken to abandon maintaining the page previously called "Cumulus.ini", and start again with a brand new empty page!</big>
# Even more dramatic changes to the MX configuration have been happening since 3.8.0, with the biggest changes at 3.9.2, 3.10.0, and 3.12.0; therefore, <big>the decision was taken to abandon maintaining the page previously called "Cumulus.ini", and start again with a brand new empty page!</big>


All the pages, previously called "Cumulus.ini", can be found from the owning [[:Category:Configuration Files|category]].  The original page was preserved at [[Cumulus.ini_(preserving_history)]] so look there for its editing history.  That page also expands on the above summary of why that old page was replaced by this new page.
 
All the pages, previously called "Cumulus.ini", can be found from the owning [[:Category:Configuration Files|category]].  The original page was preserved at [[Cumulus.ini_(preserving_history)]] so look there for its editing history.  That page also expands on the above summary of why that old page was replaced.
 
You will also note that this page does not cover all settings in detail, and find some links to further pages within some sections below
 
==Need to install MX 3.12.0 ==
 
If you are using Cumulus 1 or a release of MX earlier than 3.12.0, be aware that the content of "Cumulus.ini" is totally different to the file for later MX releases. (It might have been better had the file been given a new name in release 3.12.0).
 
The way the developer decided to implement it, is that when somebody installs release 3.12.0, any existing "Cumulus.ini" file is renamed, and a new "Cumulus.ini" file is created from scratch, and from then onwards all changes apply to the new file. As 3.12.0 is the only release that can create the replacement file, it is highly recommended that anybody currently using an older release, downloads 3.12.0 from [https://github.com/cumulusmx/CumulusMX/releases/download/b3141/CumulusMXDist3141.zip here] and runs that release for a while before upgrading to the latest release [https://github.com/cumulusmx/CumulusMX here].


== Simplifications ==
== Simplifications ==
Line 145: Line 156:
The MX software offers much functionality and flexibility.  Consequently, it has an extensive set of configuration settings, fortunately apart from the initial settings of model and units (see next sub-section), recent releases have simplified many of the settings for optional features by providing particular selections to affect a whole range of others (for predicted uses), instead of forcing you to individually work through every individual setting.
The MX software offers much functionality and flexibility.  Consequently, it has an extensive set of configuration settings, fortunately apart from the initial settings of model and units (see next sub-section), recent releases have simplified many of the settings for optional features by providing particular selections to affect a whole range of others (for predicted uses), instead of forcing you to individually work through every individual setting.


==First run of MX==
<big>Please see [[First Run of MX]] for how to set up settings when you first use MX.</big>
 
This Wiki page does not explain how to start using MX, please see [[MX on Linux]], [[MX on Windows OS]], and [[MX Administrative Interface]] as appropriate.
 
The key fact relevant here is that no Cumulus release distribution contains a '''Cumulus.ini''' file. So when you first use the software,  you will need to use the [[MX_Administrative_Interface#Changing_Settings|admin interface]] to enter all settings (some have defaults that might be right for you) as described later in this page, and that will lead to creation of the main configuration file.
 
# If you start Cumulus MX without a configuration file, and you have a screen attached so you can see the output from the engine, it will show this: [[File:MX first start.PNG]]
# As you can see, it is running, but it does not know what station type, so it cannot connect to it, and will not do anything more.
# At this stage, MX creates a very basic Cumulus.ini with the default settings (shown below).
#Open the [[MX Administrative Interface|admin interface]], and select the station settings if necessary: [[File:MX_station_settings.png|800px|center]]
# At the very minimum, you must select a station type and units (as shown in image here)
# Optionally, move down the page, entering more settings,
#* The settings that are displayed to you vary depending on the station type you have selected (and the particular MX release), so there is not a screenshot to show you the other settings for your station type.
# Optionally, move to other settings pages accessed from the menu seen in the image, these cover the optional functionality of MX, so the pages you need to visit depends on what functionality you wish to use.
# Optionally, use [[Samplestring.ini]] file as a guide to create a [[Strings.ini|strings.ini]] file (look up the cross reference if you want to do this now, but you can leave it to later) where you can tailor a number of texts that Cumulus produces.
#* The advantage of creating your '''strings.ini''' file now, is that it is read when MX starts, and we will shortly restart MX.
# Closing MX is the action that will create the main configuration file.
# MX must be stopped correctly, because it has to do a number of actions after it receives a request to close:
#* If you have a screen attached to the device running the MX engine, you can click in that screen and terminate Cumulus MX by typing '''C''' while holding down the control key (or equivalent if you are using an apple mac).
#* If you are connecting to MX from a remote device, then type into that remote session the control '''C'''.
#* Otherwise do whatever is needed to end the MX executable on your installation.
# Restart Cumulus MX, it will read your new settings (in '''Cumulus.ini''' and the optional '''strings.ini''') on re-starting, it will find the weather station, and start reading the weather data from it. On this first access to your weather station, it will not read any archive data (there is a way to modify [[today.ini]] so it can read what is in the separate logger), but from now (until you stop it) it will read (and from time to time log) the live data while MX remains running.


==What happens if I upgrade MX?==
==What happens if I upgrade MX?==
Line 271: Line 261:


As a specific example, release 3.11.0 added emailing capability; that requires quite a lot of new parameters to be added to the file.  You could use MX without these new parameters, but the Alarm Settings page would not allow you to click '''Enable''' until you had defined various settings on another Settings page, as well as on this Alarm Settings page.
As a specific example, release 3.11.0 added emailing capability; that requires quite a lot of new parameters to be added to the file.  You could use MX without these new parameters, but the Alarm Settings page would not allow you to click '''Enable''' until you had defined various settings on another Settings page, as well as on this Alarm Settings page.


=Tables listing Settings=
=Tables listing Settings=
Line 302: Line 290:
== Alarms (and emails) ==
== Alarms (and emails) ==


In the table below "Notify" determines whether an alarm is shown on the "Dashboard" page, for release 3.11.2 and subsequent the alarm also has to be enabled for it to appear.  
The Alarm settings seem to frequently be changed by new MX releases, so have been moved to a separate [[Alarms|wiki page]] where hopefully it will be easier for somebody to keep the content updated in future.


Introduction column:
==Charts==
# There was no alarm functionality in builds in the 3.0.0 and 3.1.x series
{{Template:WorkInProgressBanner}} Charts have evolved rapidly in MX development, this table needs verification by somebody who uses the functionality documented here. Can you be the contributor to bring it up to date?
# Any alarm functionality where the column says "Legacy Cumulus" was available before 1.9.0 and introduced into MX in one of the releases between 3.2.0 and 3.5.4.
# Any alarm functionality where the column says "Cumulus 2" was requested for that withdrawn flavour, subsequently added to a 1.9.x release, introduced into MX in one of the releases between 3.2.0 and 3.5.4. 
# New alarm functionality introduced in the range of releases 3.2.0 to 3.5.4 has that range shown (rather than the exact release).
# For alarm functionality first introduced in or after release 3.7.0, the release of introduction is shown in "Introduced" column.
# There were no changes to Alarm functionality between 3.7.1 and 3.8.4 inclusive, so if you are running one of the 3.8.x releases, the Wiki page that applies for "alarms" is [[Cumulus.ini_(MX_3.0.0_to_3.7.0)|the early MX releases page]], not this Wiki page.
# In the range of releases subsequent to 3.9.0 as covered by this Wiki page, the alarm functionality has been dramatically changing:
#* Latching of alarms was introduced at 3.9.1 (b. 3096), most alarms had no default for how long they stayed "latched", but at least one had a 12 hour default and at least one had an until end of day default.
#* At 3.9.2 (b.3097) reporting of notifications were added to the admin interface (called "Cumulus Dashboard" in the relevant release announcement at [https://cumulus.hosiene.co.uk/viewtopic.php?p=148406#p148406 Cumulus MX Announcements and Download - PLEASE READ FIRST],
#* At 3.9.5 (b. 3100) the latching functionality was corected,
#* At 3.9.6 (b.3101) the alarm latch hours were all defaulted to 24 hours,
#* At 3.11.0 (build 3129) where the email functionality was added,
#* And at 3.11.2 (b. 3131) where the [https://cumulus.hosiene.co.uk/viewtopic.php?p=154233#p154233 release announcement] says "this release sees the Alarms getting some more love".
 
"Shown on Settings page?" and "MX Section" columns:
* For releases between 3.2.0 and 3.10.5, all alarm related settings were "always" shown, and none required opening a "MX section".
* For release 3.11.0 and subsequent releases, the introduction of email functionality means there are now some alarm related settings on the "Internet Settings" page, where there is a section "Email Server Settings" that needs to be opened, and a ''master'' setting that determines whether other settings are shown or not.


"Label on Settings page" column:
* For releases between 3.2.0 and 3.10.5, all alarm related settings were shown using [[MX_Basic_info#dataTables|a HTML table]], so the entry in the label column in the table below quotes the text shown after the check box that starts the settings table row
* For release 3.11.0 and subsequent releases, the introduction of email functionality means there are now some alarm related settings where the label column quotes the text shown beside the individual setting, but all other alarm related settings quote the text shown after the check box that starts a settings table row
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Shown on Settings page?
!style="width:100px" | File Section
!style="width:100px" | File Section
!style="width:150px" | Introduced
!style="width:100px" | Introduced
!style="width:100px" | MX Section
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page (mostly in '''Alarm''' column)
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:300px" | Description
!style="width:600px" | Description
|-
|-
| alarmhighgust=0
| GraphHours=24
| (always)
| [Graphs]
| [Alarms]
| Legacy Cumulus
| Legacy Cumulus
| Alarm Settings
| Station Settings &rarr; Graphs
| Wind gust more than:
| Graph hours
| 0 (disabled)
| 24 (2 rolling days worth of values)
| Use the spin button to select the '''Value''' of calculated (10 minute) wind gust that has to be exceeded to trigger the alarm
| For those plots that show values (if available) minute by minute, how many days back to go. Some people prefer to set this to 48 or 96, that means uploading a lot more data in the [[:Category:JSON_Files|.json files]], but it shows more on charts
|-
|-
| alarmhighpress=0
| AppTempVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Legacy Cumulus
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Apparent temperature
| Pressure rises above:
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Australian Apparent Temperature plotted on Charts
| Use the spin button to select the '''Value''' of measured Sea Level Pressure that has to be exceeded to trigger the alarm
|-
| alarmhighrainrate=0
| (always)
| [Alarms]
| Legacy Cumulus
| Alarm Settings
| Rainfall rate rises above:
| 0 (disabled)
| Use the spin button to select the '''Value''' of calculated rainfall rate that has to be exceeded to trigger the alarm
|-
|-
| alarmhighraintoday=0
| BaseTemperature1=
| (always)
| [GrowingDD] and [TempSum]
| [Alarms]
| Release 3.11.0 - b3129
| Legacy Cumulus
| Station Settings &rarr; Growing Degree Days
| Alarm Settings
| Base temperature #1
| Rainfall today more than:
| Depends on selected temperature units (not quite same)
| 0 (disabled)
* (Celsius) 5  (equivalent to 41 <sup>o</sup>Fahrenheit)
| Use the spin button to select the '''Value''' of calculated daily rainfall total that has to be exceeded to trigger the alarm
* (Fahrenheit) 40 (equivalent to 4.44 <sup>o</sup>Celsius)
| Base temperature for series 1
|-
|-
| alarmhightemp=0
| BaseTemperature2=
| (always)
| [GrowingDD] and [TempSum]
| [Alarms]
| Release 3.11.0 - b3129
| Legacy Cumulus
| Station Settings &rarr; Growing Degree Days
| Alarm Settings
| Base temperature #1
| Temperature rises above:
| Depends on selected temperature units (equivalent)
| 0 (disabled)
* (Celsius) 10
| Use the spin button to select the '''Value''' of measured outside temperature that has to be exceeded to trigger the alarm
* (Fahrenheit) 50
| Base temperature for series 2
|-
|-
| alarmhighwind=
| Cap30C=1
| (always)
| [GrowingDD]
| [Alarms]
| Release3.11.0 - b3129
| Legacy Cumulus
| Station Settings &rarr; Growing Degree Days
| Alarm Settings
| Cap GDD at 30°C / 86°F
| Average wind more than:
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want growing degree days capped and not incremented at high temperatures (threshold shown in setting name)
| Use the spin button to select the '''Value''' of calculated average wind speed that has to be exceeded to trigger the alarm
|-
|-
|-
| ChartMaxDays=31
| alarmlowpress=0
| [Graphs]
| (always)
| [Alarms]
| Legacy Cumulus
| Legacy Cumulus
| Alarm Settings
| Station Settings &rarr; Graphs
| Pressure falls below:
| Graph Days
| 0 (disabled)
| 31 (daily values)
| Use the spin button to select the '''Value''' of measured Sea Level Pressure it must go below to trigger the alarm
| For those plots that show recent daily values, this states how many of them to plot
|-
|-
| alarmlowtemp=0
| Colour0=#058DC7, Colour1=#50B432, Colour2=#ED561B, Colour3=#DDDF00, Colour4=#24CBE5, and Colour5=#64E572
| (always)
| [Select-a-Chart]
| [Alarms]
| Release 3.9.7 - b3107
| Legacy Cumulus
| ???
| Alarm Settings
| ???
| Temperature falls below:
| Hex colours as shown in parameter list
| 0
| Colour of line used for plotting the respective series
| Use the spin button to select the '''Value''' of measured outside temperature it must go below to trigger the alarm
|-
|-
| alarmpresschange=0
| DailyAvgTempVisible=1
| (always)
| [Graphs]
| [Alarms]
| Release 3.11.0 - b3129
| Cumulus 2
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Daily Average Temperature
| Pressure changes by:
| Ticked (shown in Cumulus.ini as 1)
| 0
| Simple tick or not indicating whether you want to see Daily (integrated) Average temperature plotted on Charts
| Use the spin button to select the '''Value''' by which the measured Sea Level Pressure must rapidly change (in legacy Cumulus this was taking trend for the last hour, the developer has not specified what period applies for MX) to trigger the alarm
|-
|-
| alarmtempchange=0
| DailyMaxTempVisible=1
| (always)
| [Graphs]
| [Alarms]
| Release 3.11.0 - b3129
| Cumulus 2
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Daily Maximum Temperature  
| Temperature changes by:
| Ticked (shown in Cumulus.ini as 1)
| 0
| Simple tick or not indicating whether you want to see Daily Maximum temperature plotted on Charts
| Use the spin button to select the '''Value''' by which the measured outside temperature must rapidly change (in legacy Cumulus this was taking trend for the last hour, the developer has not specified what period applies for MX) to trigger the alarm
|-
|-
| BatteryLowAlarmEmail=
| DailyMinTempVisible=1
| (always)
| [Graphs]
| [Alarms]
| Release 3.11.0 - b3129
| Release 3.11.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Daily Minimum Temperature
| Station batteries are low
| Ticked (shown in Cumulus.ini as 1)
| (blank)
| Simple tick or not indicating whether you want to see Daily Minimum temperature plotted on Charts
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
|-
|-
| BatteryLowAlarmLatch=
| DPVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Release 3.9.1
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Dew point
| Station batteries are low
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Dew Point plotted on Charts
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| BatteryLowAlarmLatchHours=24
| FeelsLikeVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Release 3.9.1
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Dew point
| Station batteries are low
| Ticked (shown in Cumulus.ini as 1)
| 24 (default set only since release 3.9.6)
| Simple tick or not indicating whether you want to see Feels Like Temperature plotted on Charts
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| BatteryLowAlarmNotify=0
| GrowingDegreeDaysVisible1=1
| (always)
| [Graphs]  
| [Alarms]
| Release3.11.0 - b3129
| within 3.2.0 to 3.5.4
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Degree Days
| Alarm Settings
| Growing Degree Days series #1
| Station batteries are low
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see series 1 plotted on Charts
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
|-
|-
| BatteryLowAlarmSet=0
| GrowingDegreeDaysVisible2=1
| (always)
| [Graphs]  
| [Alarms]
| Release3.11.0 - b3129
| (changed at 3.10.3)
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Degree Days
| Alarm Settings
| Growing Degree Days series #2
| Station batteries are low
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see series 2 plotted on Charts
| If tick '''Enable''', the alarm will be triggered if the weather station either supplies a voltage, or other battery indication that can be interpreted, and MX interprets that as indicating a low battery
|-
| BatteryLowAlarmSound=0
| (always)
| [Alarms]
| within 3.2.0 to 3.5.4
| Alarm Settings
| Station batteries are low
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
|-
| BatteryLowAlarmSoundFile=alarm.mp3
| HIVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| within 3.2.0 to 3.5.4
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Dew point
| Station batteries are low
| Ticked (shown in Cumulus.ini as 1)
| alarm.mp3
| Simple tick or not indicating whether you want to see USA Heat Index plotted on Charts
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| DataSpikeAlarmEmail=0
| HumidexVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Release 3.11.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Dew point
| Data spike is detected
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Canadian Humidity Index plotted on Charts
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
|-
|-
| DataSpikeAlarmLatch=0
| InHumVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Release 3.9.1
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Humidity Data
| Alarm Settings
| Dew point
| Data spike is detected
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Indoor Relative Humidity plotted on Charts
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| DataSpikeAlarmLatchHours=24
| InTempVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Release 3.9.1
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Dew point
| Data spike is detected
| Ticked (shown in Cumulus.ini as 1)
| 24 (default set only since release 3.9.6)
| Simple tick or not indicating whether you want to see Indoor Temperature plotted on Charts
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| DataSpikeAlarmNotify=0
| OutHumVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Release 3.7.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Humidity Data
| Alarm Settings
| Dew point
| Data spike is detected
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Outdoor Relative Humidity plotted on Charts
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
|-
|-
| DataSpikeAlarmSet=0
| Series0= to Series5=
| (always)
| [Select-a-Chart]
| [Alarms]
| Release 3.9.7 - b3107
| Release 3.7.0
| ???
| Alarm Settings
| ???
| Data spike is detected
| 0 (disabled)
| 0 (disabled)
| If tick '''Enable''', the alarm will be triggered if while MX is processing raw data from the weather station (in archive catch-up or normal running) there is a spike (a change since previous raw value read that exceeds a difference as defined on "Calibration Settings &rarr; Spike removal")
| Name of parameter to plot (in series 0 to 5) e.g. "Pressure", "Wind Gust", "Temperature", "Rainfall Rate", "Wind Bearing"
|-
|-
| DataSpikeAlarmSound=0
| SolarVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.10.0
| Release 3.7.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Solar Data
| Alarm Settings
| UV Index
| Data spike is detected
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Solar radiation plotted on Charts
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
| SunshineVisible=1
| [Graphs]
| MX release 3.10.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Solar Data
| UV Index
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not indicating whether you want to see Sunshine Hours plotted on Charts
|-
|-
| DataSpikeAlarmSoundFile=alarm.mp3
| TempSumVisible0=1
| (always)
| [TempSum]
| [Alarms]
| Release 3.11.0 - b3129
| Release 3.7.0
| Station Settings &rarr; Annual Temperature Sum
| Alarm Settings
| Annual Temperature Sum 0  
| Data spike is detected
| Ticked (shown in Cumulus.ini as 1)
| alarm.mp3
| Simple tick or not indicating whether you want to see Annual Temperature Sum series 0 plotted on Charts
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
| DataStoppedAlarmEmail=0
| (always)
| [Alarms]
| Release 3.11.0
| Alarm Settings
| Data connection is lost
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
|-
|-
| DataStoppedAlarmLatch=0
| TempSumVisible1=1
| (always)
| [TempSum]
| [Alarms]
| Release 3.11.0 - b3129
| Release 3.9.1
| Station Settings &rarr; Annual Temperature Sum
| Alarm Settings
| Annual Temperature Sum #1
| Data connection is lost
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Annual Temperature Sum minus baseline 1  plotted on Charts
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| DataStoppedAlarmLatchHours=24
| TempSumVisible2=1
| (always)
| [TempSum]
| [Alarms]
| Release 3.11.0 - b3129
| Release 3.9.1
| Station Settings &rarr; Annual Temperature Sum
| Alarm Settings
| Annual Temperature Sum #2
| Data connection is lost
| Ticked (shown in Cumulus.ini as 1)
| 24 (default set only since release 3.9.6)
| Simple tick or not indicating whether you want to see Annual Temperature Sum minus baseline 2  plotted on Charts
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| DataStoppedAlarmNotify=0
| TempSumYearStart=
| (always)
| [TempSum]
| [Alarms]
| Release 3.11.0 - b3129
| Release 3.4.2
| Station Settings &rarr; Annual Temperature Sum
| Alarm Settings
| Year summation starting month
| Data connection is lost
| Depends on hemisphere
| 0 (disabled)
* (Northern hemisphere) 1 = January
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
* (Southern hemisphere) 7 = July
| Enter as a number the month for which (on first of that month) annual temperature summation is reset to zero
|-
|-
| DataStoppedAlarmSet=0
| TempVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.7.0 - b3089
| Release 3.7.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Alarm Settings
| Dew point
| Data connection is lost
| Ticked (shown in Cumulus.ini as 1)
| 0 (disabled)
| Simple tick or not indicating whether you want to see Outdoor Temperature plotted on Charts
| If tick '''Enable''', the alarm will be triggered if while MX is processing raw data from the weather station (in archive catch-up or normal running) there is a spike (a change since previous raw value read that exceeds a difference as defined on "Calibration Settings &rarr; Spike removal")
|-
| DataStoppedAlarmSound=0
| (always)
| [Alarms]
| Release 3.7.0
| Alarm Settings
| Data connection is lost
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
|-
| DataStoppedAlarmSoundFile=alarm.mp3
| UVVisible=1
| (always)
| [Graphs]
| [Alarms]
| MX release 3.10.0
| Release 3.7.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Solar Data
| Alarm Settings
| UV Index
| Data connection is lost
| Ticked (shown in Cumulus.ini as 1)
| alarm.mp3
| Simple tick or not indicating whether you want to see Ultra Violet Index plotted on Charts
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
| WCVisible=1
| [Graphs]
| MX release 3.7.0 - b3089
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Dew point
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not indicating whether you want to see Wind Chill plotted on charts
|-
|-
| DestEmail=
| YearStarts=
| (always)
| [GrowingDD]
| [Alarms]
| Release 3.11.0 - b3129
| Release 3.11.0
| Station Settings &rarr; Growing Degree Days
| Alarm Settings
| Growing season starting month
| To email adressess(es)
| Depends on hemisphere
| (blank)
* (Northern hemisphere) 1 = January
| Please note: You cannot '''Update Alarms''' to save any settings on this page if the text box for this parameter is left blank.
* (Southern hemisphere) 7 = July
| Enter as a number the month for which (on first of that month) Growing degree days is reset to zero
|}
 
==Data Logging==


You can enter either a single email addresss or a list of email addresses here, a semicolon must be used as separator between addresses.
* Available in all Cumulus releases
* File Section is [Station]
{| class="wikitable" border="1"
|-
|-
| Enabled=0
!style="width:30px" | Parameter Line Entry
| When section opened
!style="width:100px" | Shown on Settings page?
| [SMTP]
!style="width:100px" | MX Section
| Release 3.11.0
!style="width:60px" | Label on Settings page
| Internet Settings &rarr; Email Server Settings
!style="width:20px" | Default
| Enabled
!style="width:600px" | Description
| Not ticked (shown as 0 in Cumulus.ini)
| If you tick here, a selection of further options (identified by ^) are shown
|-
| FromEmail=
| (always)
| [Alarms]
| Release 3.11.0
| Alarm Settings
| From email address
| (blank)
| Please note: You cannot '''Update Alarms''' to save any settings on this page if the text box for this parameter is left blank.
 
You can enter a single email addresss
|-
|-
| HighGustAlarmEmail=0
| DataLogInterval=2
| (always)
| (Always)
| [Alarms]
| Station settings &rarr; General Settings
| Release 3.11.0
| Log interval
| Alarm Settings
| 2 (10 minutes)
| Wind gust more than:
| Drop-down:
| 0 (disabled)
* 0 = 1 minute between MX logs into the one to three [[Monthly_log_files]] (i.e. [[Standard log files]], and optionally [[Extra Sensor Files]], [[Air_Link_Log.txt]])
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
* 1 = 5 minutes between MX logging lines
* 2 = 10 minutes between MX logging lines
* 3 = 15 minutes between MX logging lines
* 4 = 20 minutes between MX logging lines
* 5 = 30 minutes between MX logging lines
|-
|-
| HighGustAlarmLatch=0
| LogExtraSensors=0
| (always)
| (Depends on station type) Only from Release 3.12.0
| [Alarms]
| Station settings &rarr; Common Options
| Release 3.9.1
| Extra sensors
| Alarm Settings
| Wind gust more than:
| 0 (disabled)
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if your weather station can output readings to be logged in [[Extra Sensor Files]]
* Don't tick (value shown as 0 in Cumulus.ini) if you have nothing to log to Extra Sensor Files.
|-
|-
| HighGustAlarmLatchHours=24
| NoSensorCheck=0
| (always)
| (not yet on a settings page)
| [Alarms]
| (not known)
| Release 3.9.1
| (not known)
| Alarm Settings
| 0 (normal)
| Wind gust more than:
| Boolean:
| 24 (default set only since release 3.9.6)
* 0 = MX will stop if any of the minimum set of sensors listed below fails
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
* 1 = MX will continue to run, even if any of the minimum set of sensors listed below fails
|-
 
| HighGustAlarmNotify=0
Minimum set of sensors:
| (always)
# Current air temperature
| [Alarms]
# Current Relative Humidity
| Release 3.11.0
# At least one wind speed
| Alarm Settings
# Current air pressure (absolute or sea-level)
| Wind gust more than:
Cumulus will stop processing any information from a weather station unless the above 4 source values are being supplied and reveal they are being updated (failure is set is after a total of 6 unsuccessful consecutive attempts to read each of these).
| 0 (disabled)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
|-
|-
| HighGustAlarmSet=0
| RainDayThreshold=-1
| (always)
| (with warning: "Here be dragons!")
| [Alarms]
| Depends on release:
| Legacy Cumulus
* (3.5.1 to 3.11.4) Manual edit of file
| Alarm Settings
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
| Wind gust more than:
| Rain day threshold
| 0 (disabled)
| -1 (that represents 0.2 mm or 0.01 inches)
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
| The amount of rainfall that must be collected before MX treats today as a wet day
 
''The intention is this will represent more than one tip, as the first tip might contain some rain from an earlier day''
|-
|-
| HighGustAlarmSound=0
| RolloverHour=0
| (always)
| (Always)
| [Alarms]
| Station settings &rarr; Log Rollover
| Legacy Cumulus
| Time
| Alarm Settings
| 0 (midnight)
| Wind gust more than:
| Radio type selection:
| 0 (disabled)
* 0 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches midnight
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
* 1 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time
|-
|-
| HighGustAlarmSoundFile=alarm.mp3
| SnowDepthHour=0
| (always)
| (with warning: "Here be dragons!")
| [Alarms]
| Depends on release:
| Legacy Cumulus
* (3.5.1 to 3.11.4) Manual edit of file
| Alarm Settings
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
| Wind gust more than:
| Snow depth hour
| alarm.mp3
| 0 (midnight)
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
| Spin selector of 0 to 23: Defines hour from which entries in [[Weather Diary]] for current calendar day are used. Prior to this hour the weather diary will be searched for Calendar yesterday
|-
| HighPressAlarmEmail=0
| (always)
| [Alarms]
| Release 3.11.0
| Alarm Settings
| Pressure rises above:
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
|-
|-
| HighPressAlarmLatch=0
| StartDate=
| (always)
| (with warning: "Here be dragons!")
| [Alarms]
| Station Settings &rarr; Common Options &rarr; Advanced Options
| Release 3.9.1
| Records Began date
| Alarm Settings
| (Set when you first use Cumulus)
| Pressure rises above:
| Format used is determined by locale used for running MX.  If this date is edited, keep to same format. MX generally (see [[Calculate_Missing_Values#CreateMissing.exe]] for exceptions) ignores any data file entries prior to this date.
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| HighPressAlarmLatchHours=24
| UseDataLogger=1
| (always)
| (probably determined by station type)
| [Alarms]
| (not known)
| Release 3.9.1
| (not known)
| Alarm Settings
| 1 (enabled)
| Pressure rises above:
|Simple tick or not
| 24 (default set only since release 3.9.6)
* Tick (value shown as 1 in Cumulus.ini) if your weather station has its own storage, so MX can do a catch up when it first starts and read any "archive data"
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
* Don't tick (value shown as 0 in Cumulus.ini) if your weather station has no storage, and therefore MX cannot capture any readings when it is not running
|-
|-
| HighPressAlarmNotify=0
| Use10amInSummer=1
| (always)
| (Always)
| [Alarms]
| Station settings &rarr; Log Rollover
| within 3.2.0 to 3.5.4
| Use 10am in Summer
| Alarm Settings
| 1 (normal)
| Pressure rises above:
| Tick box:
| 0 (disabled)
* 0 = If "Daylight Saving Time" (DST) applies in Summer,
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]  
** If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
|-
** If rollover time is 9 a.m., MX is to use 9 am local time, regardless of whether DST is in operation or not
| HighPressAlarmSet=0
* 1 = Normal behaviour:
| (always)
** If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
| [Alarms]
** If MX would do  [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time, then it waits until 10 a.m. local time while DST is in effect
| Legacy Cumulus
|}
| Alarm Settings
 
| Pressure rises above:
 
| 0 (disabled)
==Debugging==
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
 
|-
* Available from beta MX.
| HighPressAlarmSound=0
* File Section is [Station]
| (always)
{| class="wikitable" border="1"
| [Alarms]
| Legacy Cumulus
| Alarm Settings
| Pressure rises above:
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
|-
| HighPressAlarmSoundFile=alarm.mp3
!style="width:30px" | Parameter Line Entry
| (always)
!style="width:300px" | MX Section
| [Alarms]
!style="width:60px" | Label on Settings page
| Legacy Cumulus
!style="width:20px" | Default
| Alarm Settings
!style="width:600px" | Description
| Pressure rises above:
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| HighRainRateAlarmEmail=0
| Logging=1
| (always)
| Depends on release installed:
| [Alarms]
# Alternatives:
| Release 3.11.0
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: Logging = 1, then restart Cumulus MX.
| Alarm Settings
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
| Rainfall rate rises above:
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Debug logging
| 0 (disabled)
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
| This adds extra information about data transfers between your weather station and MX.
 
It was introduced originally for Davis stations only, but later (can someone insert here the relevant release) extended to cover more stations.
|-
|-
| HighRainRateAlarmLatch=0
| DataLogging=1
| (always)
| Depends on release installed:
| [Alarms]
# Alternatives:
| Release 3.9.1
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: DataLogging = 1, then restart Cumulus MX.
| Alarm Settings
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
| Rainfall rate rises above:
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Debug logging
| 0 (disabled)
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
| This adds extra information about both data transfers initiated from MX, and all the internal MX processes.
|}
 
==Extra Web Files==
 
There are 100 occurrences of each parameter in Cumulus.ini, and therefore each parameter has a base name followed by numbers 0 to 99.
 
The settings interface presents the rows on multiple pages, the rows are not numbered, so you have to do some counting to work out which row in the admin interface page corresponds with which parameter in Cumulus.ini file.
 
'''You MUST restart MX after any changes in this section, before the new settings take effect.'''
 
{| class="wikitable" border="1"
|-
|-
| HighRainRateAlarmLatchHours=24
!style="width:30px" | Parameter Line Entry
| (always)
!style="width:100px" | Label on Settings page
| [Alarms]
!style="width:20px" | Default
| Release 3.9.1
!style="width:800px" | Description
| Alarm Settings
| Rainfall rate rises above:
| 24 (default set only since release 3.9.6)
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| HighRainRateAlarmNotify=0
|style="background:lightgray;"|[FTP site]  
| (always)
|
| [Alarms]
|
| within 3.2.0 to 3.5.4
|style="background:lightgray;"|Section name
| Alarm Settings
| Rainfall rate rises above:
| 0 (disabled)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
|-
|-
| HighRainRateAlarmSet=0
|ExtraLocal0= to ExtraLocal99=
| (always)
|Local File Name
| [Alarms]
|(empty)
| Legacy Cumulus
|You can enter:
| Alarm Settings
* A relative path name, with respect to the "CumulusMX" root folder
| Rainfall rate rises above:
** e.g.  '''./data/dayfile.txt''' (Note: this is the [[Daily_Summary|daily summary log file]], see link for how it can be used on a web server)
| 0 (disabled)
** e.g. '''./webMX/betel_monthlyrecord_liteMXT.html''' (Note: this is a third party [[Cumulus_template_file|template file]] - see [https://cumulus.hosiene.co.uk/viewtopic.php?f=14&t=7500 Alternative Monthly Extremes using <#webtag>s]
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
** e.g. '''./web/trendsT.htm''' (Note: That file is not part of default web site any more, but serves as another example
|-
* A full path name for a file on the computer running MX
| HighRainRateAlarmSound=0
** e.g. '''/home/pi/documents/myFile'''
| (always)
** e.g. '''C:\Users\Public\Documents\working.txt'''
| [Alarms]
*You can place any of the following special tags into the entry
| Legacy Cumulus
** These should be typed as shown on their own
| Alarm Settings
*** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports 
| Rainfall rate rises above:
***  '''<currentlogfile>''', '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files  e.g. ExtraLocal3=<currentlogfile>
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
| HighRainRateAlarmSoundFile=alarm.mp3
| (always)
| [Alarms]
| Legacy Cumulus
| Alarm Settings
| Rainfall rate rises above:
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| HighRainTodayAlarmEmail=0
|ExtraRemote0= to ExtraRemote99=
| (always)
|Destination Filename
| [Alarms]
|(empty)
| Release 3.11.0
|Defines where MX is to upload file to
| Alarm Settings
* If file transfer is requested (see below), the file path should be expressed starting at the FTP/FTPS/SFTP root
| Rainfall today more than:
**I can't tell you what the file path is for your web server, but I can give a couple of examples to steer you
| 0 (disabled)
*** e.g. httpdocs/dayfile.txt
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
*** e.g. public_html/thismonthyear.htm
* If the FTP is not ticked, the file path should be full path for a file on the computer running MX
** e.g. /var/www/html/weather/images/moon.png could be destinatation for uploading the MX generated moon image to a Linux hosted [[Your_Own_Server|server]]  
** e.g. /var/www/html/weather/webfilesMX/tempdata.json for uploading one of the [[:Category:JSON_Files|files with graph data]] to a Linux hosted [[Your_Own_Server|server]]
*You can place any of the following special tags into the entry
** These should be typed as shown as part of the destination path, note that they can be used:
*** either to represent the final filename part of the path e.g. ExtraRemote3=/var/www/html/weather/monthly/<currentlogfile>
*** or to modify a filename, so it becomes unique to a particular month e.g. ExtraRemote0=/var/www/html/weather/cumulus_generated/savedFiles/web_tags_real_time_<currentlogfile>.inc
** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports
**  '''<currentlogfile>''',  '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files
|-
|-
| HighRainTodayAlarmLatch=0
|ExtraProcess0= to ExtraProcess99=
| (always)
|Process
| [Alarms]
|0
| Release 3.9.1
|Simple tick or not
| Alarm Settings
* Tick (value shown as 1 in Cumulus.ini) if the local file is a [[Cumulus_template_file|template file]], see [[Customised_templates#What_is_meant_by_.27Cumulus_processes_templates.27|here]] for full explanation of '''Process'''
| Rainfall today more than:
* Don't tick (value shown as 0 in Cumulus.ini) if you want local file uploaded with existing content
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| HighRainTodayAlarmLatchHours=24
|ExtraRealtime0= to ExtraRealtime99=
| (always)
|Realtime
| [Alarms]
|0
| Release 3.9.1
|Simple tick or not
| Alarm Settings
*Tick (value shown as 1 in Cumulus.ini) if
| Rainfall today more than:
*# See [[#Realtime Settings]], you must have "Enable realtime" ticked, and defined an interval there
| 24 (default set only since release 3.9.6)
*# Uploads the file to destination specified at interval defined
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
|-
| HighRainTodayAlarmNotify=0
| (always)
| [Alarms]
| within 3.2.0 to 3.5.4
| Alarm Settings
| Rainfall today more than:
| 0 (disabled)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]  
|-
|-
| HighRainTodayAlarmSet=0
|ExtraFTP0= to ExtraFTP99=
| (always)
|FTP
| [Alarms]
|1
| Legacy Cumulus
|Simple tick or not
| Alarm Settings
*Tick (value shown as 1 in Cumulus.ini) if you want MX to use the FTP protocol specified in [[#Web/FTP Site]]
| Rainfall today more than:
* Don't tick (value shown as 0 in Cumulus.ini) if the remote file is on the computer running MX and a simple Copy File is required
| 0 (disabled)
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
|-
|-
| HighRainTodayAlarmSound=0
|ExtraUTF0= to ExtraUTF99=
| (always)
|UTF-8
| [Alarms]
|1
| Legacy Cumulus
|Please see [[Reports_folder#Encoding|technical guidance on encoding]]
| Alarm Settings
*Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters
| Rainfall today more than:
*If unticked (0 appears in file), then iso-8859-1 encoding is used
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
|-
| HighRainTodayAlarmSoundFile=alarm.mp3
|ExtraBinary0= to ExtraBinary99=
| (always)
|Binary
| [Alarms]
|0
| Legacy Cumulus
|Simple tick or not
| Alarm Settings
*Tick (value shown as 1 in Cumulus.ini) if your file is e.g. an image file (e.g. moon.png)
| Rainfall today more than:
* Don't tick (value shown as 0 in Cumulus.ini) if the file is text, HTML, PHP script, JSON, JavaScript
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| HighTempAlarmEmail=0
|ExtraEOD0= to ExtraEOD99=
| (always)
|End of Day
| [Alarms]
|0
| Release 3.11.0
|Simple tick or not
| Alarm Settings
*Tick (value shown as 1 in Cumulus.ini) if your file is to be uploaded during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
| Temperature rises above:
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
| 0 (disabled)
|}
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
 
== Location==
 
* Introduced for legacy Cumulus
* File Section is [Station]
 
{| class="wikitable" border="1"
|-
|-
| HighTempAlarmLatch=0
!style="width:30px" | Parameter Line Entry
| (always)
!style="width:100px" | MX Section
| [Alarms]
!style="width:60px" | Label on Settings page
| Release 3.9.1
!style="width:20px" | Default
| Alarm Settings
!style="width:600px" | Description
| Temperature rises above:
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| HighTempAlarmLatchHours=24
| Altitude=0
| (always)
| Station Settings &rarr; Location
| [Alarms]
| Altitude
| Release 3.9.1
| 0
| Alarm Settings
| The height above mean sea level where the (pressure) sensor is positioned
| Temperature rises above:
| 24 (default set only since release 3.9.6)
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| HighTempAlarmNotify=0
| AltitudeInFeet=1
| (always)
| Station Settings &rarr; Location
| [Alarms]
| Altitude Units
| within 3.2.0 to 3.5.4
| Default depends on release:
| Alarm Settings
# Legacy until 3.11.4: 1 (labelled as feet)
| Temperature rises above:
# From 3.12.0: 0 (labelled metres)
| 0 (disabled)
| Radio Setting
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
* feet  (value shown as 1 in Cumulus.ini)
* metres (value shown as 0 in Cumulus.ini)
|-
|-
| HighTempAlarmSet=0
| LocName=
| (always)
| Station Settings &rarr; Location
| [Alarms]
| Name
| Legacy Cumulus
| (empty)
| Alarm Settings
| A short name for the location
| Temperature rises above:
| 0 (disabled)
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
|-
|-
| HighTempAlarmSound=0
| LocDesc=
| (always)
| Station Settings &rarr; Location
| [Alarms]
| Description
| Legacy Cumulus
| (empty)
| Alarm Settings
| A longer description for the location
| Temperature rises above:
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
|-
| HighTempAlarmSoundFile=alarm.mp3
| "Latitude=0" and "LatTxt="
| (always)
| Station Settings &rarr; Location &rarr; Latitude
| [Alarms]
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; North or South"
| Legacy Cumulus
| (blank)
| Alarm Settings
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
| Temperature rises above:
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| HighWindAlarmEmail=0
| "Longitude=0" and "LongTxt="
| (always)
| Station Settings &rarr; Location &rarr; Longitude
| [Alarms]
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; East or West"
| Release 3.11.0
| (blank)
| Alarm Settings
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
| Average wind more than:
|}
| 0 (disabled)
 
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if alarm is triggered
 
==Optional Report Settings==
 
* File Section is [NOAA]
{| class="wikitable" border="1"
|-
|-
| HighWindAlarmLatch=0
!style="width:30px" | Parameter Line Entry
| (always)
!style="width:100px" | Introduced
| [Alarms]
!style="width:100px" | MX Section
| Release 3.9.1
!style="width:60px" | Label on Settings page
| Alarm Settings
!style="width:20px" | Default
| Average wind more than:
!style="width:300px" | Description
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
| HighWindAlarmLatchHours=24
| (always)
| [Alarms]
| Release 3.9.1
| Alarm Settings
| Average wind more than:
| 24 (default set only since release 3.9.6)
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| HighWindAlarmNotify=0
| AutoCopy=0
| (always)
| Release 3.12.0
| [Alarms]
| NOAA Reports Settings &rarr; FTP Options
| within 3.2.0 to 3.5.4
| Auto Copy NOAA report files
| Alarm Settings
| 0 (disable)
| Average wind more than:
| Simple tick or not
| 0 (disabled)
* Tick (value shown as 1 in Cumulus.ini) if your report is to be copied to copy directory during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]  
* Don't tick (value shown as 0 in Cumulus.ini) for no copy action
|-
|-
| HighWindAlarmSet=0
| AutoFTP=0
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; FTP Options
| Legacy Cumulus
| Auto transfer NOAA report files
| Alarm Settings
| 0 (disable)
| Average wind more than:
| Simple tick or not
| 0 (disabled)
* Tick (value shown as 1 in Cumulus.ini) to enable the file transfer process you have defined for MX, to upload the file for you (at first update time after rollover has completed)
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
* Don't tick (value shown as 0 in Cumulus.ini) to disable any file transfer process
|-
|-
| HighWindAlarmSound=0
| AutoSave=1
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings  
| Legacy Cumulus
| Create NOAA files after daily rollover
| Alarm Settings
|0
| Average wind more than:
| Simple tick or not
| 0 (disabled)
* Tick (value shown as 1 in Cumulus.ini) if you want MX to use the (optional) Reports functionality
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
* Don't tick (value shown as 0 in Cumulus.ini) if MX Reports functionality not required
|-
|-
| HighWindAlarmSoundFile=alarm.mp3
| City=
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Site Details
| Legacy Cumulus
| City
| Alarm Settings
| (empty)
| Average wind more than:
| Enter here your hamlet, village, town, or city, name
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| HttpUploadAlarmEmail=0
| CoolingThreshold=22
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.11.2
| Cooling threshold
| Alarm Settings
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
| HTTP upload errors
| [[Heat/cold_degree_days_and_Chill_hours#Cold_Degree_Days|Cold Degree Days]] are a measure of the need to cool the air to make it more comfortable,  based on time above, and temperature difference above, a threshold temperature. An international standard says 22 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if an HTTP upload fails
|-
|-
| HttpUploadAlarmLatch=0
| CopyDirectory=
| (always)
| Release 3.12.0
| [Alarms]
| NOAA Reports Settings &rarr; Report Options
| Release 3.11.2
| Copy Directory
| Alarm Settings
| (empty)
| HTTP upload errors
| The folder on the web server you host to which reports are to be copied
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| HttpUploadAlarmLatchHours=24
| FTPDirectory=
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; FTP Options
| Release 3.11.2
| destination folder
| Alarm Settings
| Depends on release:
| HTTP upload errors
* (3.1.0 to 3.11.4) blank
| 24 (default set only since release 3.9.6)
* (3.12.0 onwards) to match change in default web site script specification of '''Reports''' folder
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
| Specify the destination folder for file transfer to, on your FTP server
*Leave at default (for your release) and MX will work with the default web pages script supplied (at same release)
* Specify a folder relative to FTP root, and MX will upload reports to that folder instead (you are then responsible for writing any script on your web site to find each report and do any processing).
|-
|-
| HttpUploadAlarmNotify=0
| HeatingThreshold=15.5
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.11.2
| Heating threshold
| Alarm Settings
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
| HTTP upload errors
|[[Heat/cold_degree_days_and_Chill_hours#Heat_Degree_Days| Heating Degree Days]] are a measure of the need for heating, based on time below, and temperature difference below, a threshold temperature. An international standard says 15.5 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
| 0 (disabled)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]  
|-
|-
| HttpUploadAlarmSet=0
| MaxTempComp1=22
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.11.2
| Max temp comparison 1
| Alarm Settings
| (empty)
| HTTP upload errors
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the cooling degree day threshold in Celsius. Express in Fahrenheit if that is your chosen unit
| 0 (disabled)
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
|-
|-
| HttpUploadAlarmSound=0
| MaxTempComp2=0
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.11.2
| Max temp comparison 2
| Alarm Settings
| (empty)
| HTTP upload errors
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
|-
| HttpUploadAlarmSoundFile=alarm.mp3
| MinTempComp1=15.5
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.11.2
| Min temp comparison 1
| Alarm Settings
| (empty)
| HTTP upload errors
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the heating degree day  threshold in Celsius. Express in Fahrenheit if that is your chosen unit
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| HttpUploadAlarmTriggerCount=1
| MinTempComp2=0
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.11.2
| Min temp comparison 2
| Alarm Settings
| (empty)
| HTTP upload errors
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
| 1 (trigger immediately a failure occurs)
| Use the spin button to specify how many failures need to occur, within the latch time, before the alarm is triggered
|-
|-
| Logging=0
| MonthFileFormat='NOAAMO'MMyy'.txt'
| ^
| First with Cumulus 2
| [SMTP]
| NOAA Reports Settings &rarr; Output Files
| Release 3.11.2
| Monthly filename format
| Depends on release:
| 'NOAAMO'MMyy'.txt' (note quotes round '''NOAAMO''' and round '''.txt''')
# (Release 3.9.4 to 3.11.4) Program Settings → Program General Options
| Here you specify the filename template for MX to use when reading, or writing, monthly reports
# (Release 3.12.0 onwards) Program Settings → Logging Options
 
| Email logging
There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension. e.g. "NOAAMO"MMMyyyy".txt" would also be valid.
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want to enable extra SMTP logging to the smtp.log file in the [[MXdiags folder|'''MXdiags''' folder]].
* Don't tick (value shown as 0 in Cumulus.ini) for no extra information in diagnostic logging
|-
|-
| LowPressAlarmEmail=0
| Name=Personal Weather Station
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Site Details
| Release 3.11.0
| Site Name
| Alarm Settings
| (empty)
| Pressure falls below:
| What you would like to see in report title for your station name
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if an HTTP upload fails
|-
|-
| LowPressAlarmLatch=0
| NOAAUseUTF8=1
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Report Options
| Release 3.11.2
| Use UTF-8 encoding
| Alarm Settings
| 1 (UTF-8)
| Pressure falls below:
| Please see [[Reports_folder#Encoding]]
| 0 (disabled)
* Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters, including the <sup>o</sup> degree symbol
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
* If unticked (0 appears in file), then iso-8859-1 encoding is used, this has a more restricted range of characters, and the <sup>o</sup> degree symbol is coded differently
|-
|-
| LowPressAlarmLatchHours=24
| RainComp1=0.5
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.9.1
| Rain comparison 1  
| Alarm Settings
| (empty)
| Pressure falls below:
| The report will count the number of days when the daily rainfall exceeds this threshold. In the parameter I have quoted, the first comparison has been set to the same as I have set else where as my significant rain threshold
| 24 (default set only since release 3.9.6)
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| LowPressAlarmNotify=0
| RainComp2=
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| within 3.2.0 to 3.5.4
| Rain comparison 2
| Alarm Settings
| (empty)
| Pressure falls below:
| The report will count the number of days when the daily rainfall exceeds this threshold.
| 0 (disabled)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
|-
|-
| LowPressAlarmSet=0
| RainComp3=
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Thresholds
| Legacy Cumulus
| Rain comparison 3
| Alarm Settings
| (empty)
| Pressure falls below:
| The report will count the number of days when the daily rainfall exceeds this threshold.
| 0 (disabled)
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
|-
|-
| LowPressAlarmSound=0
| State=
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Site Details
| Legacy Cumulus
| State
| Alarm Settings
| (empty)
| Pressure falls below:
| Enter here your local authority area or region (state in USA)
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
|-
| LowPressAlarmSoundFile=alarm.mp3
| UseDotDecimal=0
| (always)
| Release 3.9.5 - b3100
| [Alarms]
| NOAA Reports Settings &rarr; Report Options
| Legacy Cumulus
| Use a 'dot' decimal point
| Alarm Settings
| 0 (disable)
| Pressure falls below:
| Formatting real numbers for when NOAA report parsed by a script
| alarm.mp3
 
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want NOAA reports to use decimal point even if locale says use decimal comma
* Don't tick (value shown as 0 in Cumulus.ini) if NOAA reports use the integer/decimal separator specified by locale
|-
|-
| LowTempAlarmEmail=0
| UseMinMaxAvg=0
| (always)
| Release 3.12.0
| [Alarms]
| NOAA Reports Settings &rarr; Report Options
| Release 3.11.0
| Use WHO average or Integrated average
| Alarm Settings
| 0 (integrated average)
| Temperature falls below:
| Simple tick or not
| 0 (disabled)
* Tick (value shown as 1 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use WHO approach: (min + max)/2
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if an HTTP upload fails
* Don't tick (value shown as 0 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use integrated calculation: Sum of all temperature measurements divided by count of measurements
|-
|-
| LowTempAlarmLatch=0
| YearFileFormat='NOAAYR'yyyy'.txt’
| (always)
| First with Cumulus 2
| [Alarms]
| NOAA Reports Settings &rarr; Output Files
| Release 3.11.2
| Yearly filename format
| Alarm Settings
| 'NOAAYR'yyyy'.txt'
| Temperature falls below:
| Here you specify the filename template for MX to use when reading, or writing, yearly reports
| 0 (disabled)
 
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension.
|-
| LowTempAlarmLatchHours=24
| (always)
| [Alarms]
| Release 3.9.1
| Alarm Settings
| Temperature falls below:
| 24 (default set only since release 3.9.6)
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| LowTempAlarmNotify=0
|12hourformat=0
| (always)
| ???
| [Alarms]
| NOAA Reports Settings &rarr; Output Files
| within 3.2.0 to 3.5.4
|Time format
| Alarm Settings
|0 (24 hour)  
| Temperature falls below:
| How times are output on reports
| 0 (disabled)
* 24 Hour (value shown as 0 in Cumulus.ini)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
* 12 Hour (value shown as 1 in Cumulus.ini)
|-
|}
| LowTempAlarmSet=1
 
| (always)
 
| [Alarms]
===Normal Mean Temperatures===
| Legacy Cumulus
 
| Alarm Settings
* File Section is [NOAA]
| Temperature falls below:
* The parameters run from ‘’’NOAATempNormJan=’’’ to ‘’’NOAATempNormDec=’’
| 0 (disabled)
* There is one box labelled for each month on the settings screens
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
* All the defaults are (blank)
|-
* What you enter is the mean temperature, long-term averages (say over 10 or 30 years if available) say is expected that month, often taken from local climate statistics, or your own past measurements
| LowTempAlarmSound=0
 
| (always)
===Normal Precipitation===
| [Alarms]
 
| Legacy Cumulus
* File Section is [NOAA]
| Alarm Settings
Rainfall equivalents of mean temperature described above
| Temperature falls below:
 
| 0 (disabled)
 
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
==Optional Structured Query Language Settings==
|-
 
| At time of writing there is a MX bug:
MX uses a software package called "MySqlConnect" to run SQL queries.
* (Reads) LowTempAlarmSoundFile=alarm.mp3
 
* (Writes) LowTempAlarm.SoundFile=alarm.mp3
Since the text that appeared here was added, documenting plans for the future 3.12.0 release, there have been a number of changes, and now a future release (3.20.0) is expected to make more drastic changes.  Therefore the content has been moved to a [[MySqlConnect|new "MySqlConnect" page]] where it is hoped somebody will find it easier to update the content as MX develops.
| (always)
 
| [Alarms]
 
| within 3.2.0 to 3.5.4
==Optional Third-party Upload Settings==
| Alarm Settings
 
| Temperature falls below:
 
| alarm.mp3
{| class="wikitable" border="1"
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
| MySqlUploadAlarmEmail=0
| (always)
| [Alarms]
| Release 3.11.2
| Alarm Settings
| MySQL upload errors
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if an HTTP upload fails
|-
| MySqlUploadAlarmLatch=0
| (always)
| [Alarms]
| Release 3.11.2
| Alarm Settings
| MySQL upload errors
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| MySqlUploadAlarmLatchHours=24
!style="width:30px" | Parameter Line Entry
| (always)
!style="width:30px" | File Section
| [Alarms]
!style="width:60px" | MX Section
| Release 3.11.2
!style="width:80px" | Action on Settings page
| Alarm Settings
!style="width:20px" | Default
| MySQL upload errors
| 24 (default set only since release 3.9.6)
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
|-
| MySqlUploadAlarmNotify=0
| <pre>ID=
| (always)
pass=-1
| [Alarms]
server=cwop.aprs.net
| Release 3.11.2
port=14580
| Alarm Settings
Enabled=0
| MySQL upload errors:
Interval=9
| 0 (disabled)
SendSR=0
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
APRSHumidityCutoff=0</pre>
| [APRS]
| APRS/CWOP
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| MySqlUploadAlarmSound=0
| <pre>User=
| (always)
Password=
| [Alarms]
Language=en
| Release 3.11.2
Enabled=0
| Alarm Settings
Interval=900
| MySQL upload errors:
SendUV=0
| 0 (disabled)
SendSR=0
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
SendSoilTemp=0
SendIndoor=0
SendSoilMoisture=0
SendLeafWetness=0
SendAirQuality=0</pre>
| [Awekas]
| AWEKAS
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| MySqlUploadAlarmSoundFile=alarm.mp3
| <pre>Enabled=0
| (always)
CatchUp=1
| [Alarms]
APIkey=
| Release 3.11.2
StationId=
| Alarm Settings
Interval=15</pre>
| MySQL upload errors:
| [OpenWeatherMap]
| alarm.mp3
| OpenWeatherMap
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| MySqlUploadAlarmTriggerCount=1
| <pre>ID=
| (always)
Password=
| [Alarms]
Enabled=0
| Release 3.11.2
Interval=15
| Alarm Settings
SendUV=0
| MySQL upload errors:
SendSR=0
| 1 (trigger immediently a failure occurs)
CatchUp=1</pre>
| Use the spin button to specify how many failures need to occur, within the latch time, before the alarm is triggered
| [PWSweather]
| PWS Weather
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| Password=
| <pre>User=
| ^
Password=
| [SMTP]
Enabled=0
| Release 3.11.0
Interval=60
| Internet Settings &rarr; Email Server Settings
OauthToken=unknown
| Password
OauthTokenSecret=unknown
| (blank)
TwitterSendLocation=1</pre>
| Text box where you enter password needed to authenticate with your SMTP email server
| [Twitter]
| Twitter
| Please note that twitter is deprecated, no new settings possible, existing settings can be used by people who migrated from Cumulus 1 with working tokens
| Defaults are as shown in list of parameters
|-
|-
| Port=587
| <pre>Wid=
| ^
Key=
| [SMTP]
Enabled=0
| Release 3.11.0
Interval=10
| Internet Settings &rarr; Email Server Settings
SendUV=0
| Network Port
SendSR=0
| 587
SendAQI=0
| Text box where you enter the port used to connect to your SMTP email server
SendSoilMoisture=0
SoilMoistureSensor=0
SendLeafWetness=0
LeafWetnessSensor=0</pre>
| [WeatherCloud]
| WeatherCloud
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| PressChangeAlarmEmail=0
| <pre>Enabled=0
| (always)
StationUID=
| [Alarms]
Password=
| Release 3.11.0
Interval=1
| Alarm Settings
  SendRain=0</pre>
| Pressure changes by:
| [WindGuru]
| 0 (disabled)
| Windguru
| If tick '''Email''', and all the email settings marked ^ have been completed, an alarm will be sent if an HTTP upload fails
| Tick "Enabled" to see list of parameters so you can edit them
|-
| Defaults are as shown in list of parameters
| PressChangeAlarmLatch=0
| (always)
| [Alarms]
| Release 3.11.2
| Alarm Settings
| Pressure changes by:
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
|-
|-
| PressChangeAlarmLatchHours=24
| <pre>APIkey=
| (always)
StationIdx=0
| [Alarms]
Enabled=0
| Release 3.11.2
Interval=15
| Alarm Settings
SendUV=0
| Pressure changes by:
CatchUp=1</pre>
| 24 (default set only since release 3.9.6)
| [Windy]
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
| Windy.com
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| PressChangeAlarmNotify=0
| <pre>ID=
| (always)
Password=
| [Alarms]
Enabled=0
| within 3.2.0 to 3.5.4
Interval=15
| Alarm Settings
SendUV=0
| Pressure changes by:
SendSR=0
| 0 (disabled)
CatchUp=1</pre>
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]  
| [WOW]
|-
| Met Office WOW
| PressChangeAlarmSet=0
| Tick "Enabled" to see list of parameters so you can edit them
| (always)
| Defaults are as shown in list of parameters
| [Alarms]
|}
| Legacy Cumulus
 
| Alarm Settings
==Optional Web Server==
| Pressure changes by:
 
| 0 (disabled)
There are two sub-sections below, because the settings for the optional web functionality are split between '''Station Settings''' and  '''Internet Settings'''.
| If tick '''Enable''', the alarm will be triggered if measured Sea Level Pressure rapidly changes (in legacy Cumulus this was taking trend for the last hour, the developer has not specified what period applies for MX) by, or more than, the selected '''Value''' in earlier parameter
 
|-
 
| PressChangeAlarmSound=0
=== Display Options controlling what appears on default web pages ===
| (always)
 
| [Alarms]
* File Section is '''[Display]'''
| Legacy Cumulus
* MX Section is '''Station Settings &rarr; Display Options'''
| Alarm Settings
{| class="wikitable" border="1"
| Pressure changes by:
|-
| 0 (disabled)
!style="width:30px" | Parameter Line Entry
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
!style="width:100px" | Introduced
|-
!style="width:60px" | Label on Settings page
| PressChangeAlarmSoundFile=alarm.mp3
!style="width:20px" | Default
| (always)
!style="width:600px" | Description
| [Alarms]
| within 3.2.0 to 3.5.4
| Alarm Settings
| Pressure changes by:
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
|-
| RequiresAuthentication=0
| DisplaySolarData=0
| ^
| ??? 3.10.0 ???
| [SMTP]
| Display Solar data
| Release 3.11.0
| Unticked (shown as 0 in Cumulus.ini)
| Internet Settings &rarr; Email Server Settings
| Use authentication
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if a user name and password is needed to authenticate with your SMTP email server
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display solar data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
* Don't tick (value shown as 0 in Cumulus.ini) if your SMTP email server is not protected by a user name or password
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display solar data
|-
|-
| SensorAlarmEmail=0
| DisplayUvData=0
| (always)
| ??? 3.10.0 ???
| [Alarms]
| Display UV-I data 
| Release 3.11.0
| Unticked (shown as 0 in Cumulus.ini)  
| Alarm Settings
| Simple tick or not
| Sensor contact lost
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display ultra-violet intensity data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
| 0 (disabled)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display UV intensity data
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if an HTTP upload fails
|-
|-
| SensorAlarmLatch=0
| NumWindRosePoints=16
| (always)
| Legacy Cumulus
| [Alarms]
| Number of wind rose points
| Release 3.11.2
| 16
| Alarm Settings
| Drop-down determining if weather station bearing supplied by weather station is to be converted to 8 or 16 compass directions (i.e. whether to include or exclude (in English) NNE, ENE, ESE, SSE, SSW, WSW, WNW, and NNW
| Sensor contact lost
* 8 points
| 0 (disabled)
* 16 points
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
Despite what it says in the hint on the settings page, leave at default whichever weather station type you use, unless this actually causes you a problem.  The parameter was introduced by Steve Loft.  Davis wind vanes use a potentiometer to measure wind direction so send Cumulus a bearing that can vary continuously between 1 and 360 degrees. Fine Offset wind vanes use magnetic switches that depend on the magnet under the moving part selecting two switches in the fixed part for the vane being exactly in-between compass directions, and selecting one switch for the main 8 directions and slightly away from the main directions; so they have a bias against sending Cumulus the in-between directions.
|-
|-
| SensorAlarmLatchHours=24
| UseApparent=1
| (always)
| ??? MX 3.6.0 or 3.10.0 ???
| [Alarms]
| Use Apparent Temperature
| Release 3.11.2
| Ticked (shown as 1 in Cumulus.ini)
| Alarm Settings
| Simple tick or not
| Sensor contact lost
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display apparent temperature in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus prior to release 3.6.0
| 24 (default set only since release 3.9.6)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to display feels like temperature  in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus from release 3.6.0
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|}
 
 
=== File transfer and Copy Options controlling transfer of data to default web pages ===
 
The settings listed in table below changed dramatically at both 3.10.0 and 3.12.0 releases, but they have gradually evolved throughout the development of MX.
 
From 3.12.0, MX can optionally ''either'' '''copy''' files to a [[Your Own Server|web server you host]] ''or'' '''file transfer''' files to a [[Webspace|commercial web server]].
 
To implement (and customise) this web server functionality, there are many settings as listed alphabetically in this table.  The ''Internet settings'' page simplifies making settings by providing selections that amend multiple settings in a bulk operation:
* Some settings (marked ^ in table) are only displayed if you select '''I want to use the supplied default web site'''.
** For these settings, the "Generate" option is enabled in nearly all (see any qualifier) settings
** If you select "Enable file copy of standard files" (default is disabled) then those settings have their "Copy" option enabled in nearly all (see any qualifier) cases, and their "FTP Transfer" option deselected (instead of defaults shown in table)
** If you deselect "Enable file transfer of standard files" (default is enabled) then those settings have their "Copy" option disabled, and their "FTP Transfer" option enabled in nearly all (see any qualifier) cases (as per defaults shown in table)
* '''The default selections assume you have air quality, and solar, sensors; so you may need to disable some of the defaults the above selections have made'''
* If you don't select '''I want to use the supplied default web site''', then all the settings marked ^ are disabled
** This is what you want if you do not use the MX optional web server functionality
** If you have a customised  web site, you may want to select '''I want to use the supplied default web site'''  to see the settings that would otherwise all be disabled, and then pick any options that would be useful to you.
{| class="wikitable" border="1"
|-
|-
| SensorAlarmNotify=0
!style="width:30px" | Parameter Line Entry
| (always)
!style="width:100px" | File Section
| [Alarms]
!style="width:100px" | Introduced
| within 3.2.0 to 3.5.4
!style="width:100px" | Shown on Settings page?
| Alarm Settings
!style="width:100px" | MX Section
| Sensor contact lost
!style="width:60px" | Label on Settings page
| 0 (disabled)
!style="width:20px" | Default
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
!style="width:600px" | Description
|-
|-
| SensorAlarmSet=1
| ActiveFTP=0
| (always)
| [FTP site]
| [Alarms]
| Legacy Cumulus
| Legacy Cumulus
| Alarm Settings
| No
| Sensor contact lost
| Change directly in file as at release 3.11.x
| 0 (disabled)
| (n/a )
| If tick '''Enable''', the alarm will be triggered if calculated (10 minute) wind gust exceeds the selected '''Value''' in earlier parameter
| (n/a)
| *0 = Disabled (default)
*1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
|-
|-
| SensorAlarmSound=0
| Copy-airquality=0
| (always)
| [FTP site]
| [Alarms]
| Release 3.12.0
| Legacy Cumulus
| ^
| Alarm Settings
| Internet Settings &rarr;  Graph File Settings
| Sensor contact lost
| airquality.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the airquality.json file to your local web server (need to select "Generate" too)
| SensorAlarmSoundFile==alarm.mp3
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
| (always)
|-  
| [Alarms]
| Copy-alldailydegdaydata=0
| Legacy Cumulus
| [FTP site]
| Alarm Settings
| Release 3.12.0
| Sensor contact lost
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
| ServerName=
| ^
| ^
| [SMTP]
| Internet Settings &rarr; Graph File Settings
| Release 3.11.0
| alldailydegdaydata.json &rarr; Copy
| Internet Settings &rarr; Email Server Settings
| Server Name
| (blank)
| Text box where you enter name, or IP address of your SMTP email server
|-
| SSLOption=1
| ^
| [SMTP]
| Release 3.11.0
| Internet Settings &rarr; Email Server Settings
| Use SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security)
| 1 (Auto)
| Drop down:
* 0 = None
* 1 = Auto
* 2 = TLS on connect
* 3 = Start TLS
* 4 = Start TLS when available
|-
| SpikeAlarmTriggerCount=
| (always)
| [Alarms]
| Release 3.11.2
| Alarm Settings
| Data spike is detected
| 1 (trigger immediently a failure occurs)
| Use the spin button to specify how many failures need to occur, within the latch time, before the alarm is triggered
|-
| TempChangeAlarmEmail=0
| (always)
| [Alarms]
| Release 3.11.0
| Alarm Settings
| Temperature changes by:
| 0 (disabled)
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if an HTTP upload fails
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailydegdaydata.json]] file to your local web server (need to select "Generate" too)
| TempChangeAlarmLatch=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| (always)
|-  
| [Alarms]
| Copy-alldailyhumdata=0
| Release 3.11.2
| [FTP site]
| Alarm Settings
| Release 3.12.0
| Temperature changes by:
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailyhumdata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
| TempChangeAlarmLatchHours=24
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| (always)
|-  
| [Alarms]
| Copy-alldailypressdata=0
| Release 3.11.2
| [FTP site]
| Alarm Settings
| Release 3.12.0
| Temperature changes by:
| ^
| 24 (default set only since release 3.9.6)
| Internet Settings &rarr;  Graph File Settings
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
| alldailypressdata.json &rarr; Copy
|-
| TempChangeAlarmNotify=0
| (always)
| [Alarms]
| within 3.2.0 to 3.5.4
| Alarm Settings
| Temperature changes by:
| 0 (disabled)
| 0 (disabled)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
| TempChangeAlarmSet=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| (always)
|-  
| [Alarms]
| Copy-alldailyraindata=0
| Legacy Cumulus
| [FTP site]
| Alarm Settings
| Release 3.12.0
| Temperature changes by:
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailyraindata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| If tick '''Enable''', the alarm will be triggered if outside temperature rapidly changes (in legacy Cumulus this was taking trend for the last hour, the developer has not specified what period applies for MX) by, or more than, the selected '''Value''' in earlier parameter
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
| TempChangeAlarmSound=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| (always)
|-  
| [Alarms]
| Copy-alldailysolardata=0
| Legacy Cumulus
| [FTP site]
| Alarm Settings
| Release 3.12.0
| Temperature changes by:
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailysolardata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
|-
| TempChangeAlarmSoundFile=alarm.mp3
| Copy-alldailytempdata=0
| (always)
| [FTP site]
| [Alarms]
| Release 3.12.0
| within 3.2.0 to 3.5.4
| ^
| Alarm Settings
| Internet Settings &rarr;  Graph File Settings
| Temperature changes by:
| alldailytempdata.json &rarr; Copy
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
| UpgradeAlarmEmail=0
| (always)
| [Alarms]
| Release 3.11.0
| Alarm Settings
| Cumulus upgrade available
| 0 (disabled)
| 0 (disabled)
| If tick '''Email''', and all the email settings marked ^  have been completed, an alarm will be sent if an HTTP upload fails
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| UpgradeAlarmLatch=0
| Copy-alldailywinddata=0
| (always)
| [FTP site]
| [Alarms]
| Release 3.12.0
| Release 3.11.2
| ^
| Alarm Settings
| Internet Settings &rarr;  Graph File Settings
| Cumulus upgrade available
| alldailywinddata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| If tick '''Latches''', an alarm will be maintained (latched) for a user configurable number of hours (see next parameter)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| UpgradeAlarmLatchHours=24
| Copy-alltempsumdata=0
| (always)
| [FTP site]
| [Alarms]
| Release 3.12.0
| Release 3.11.2
| ^
| Alarm Settings
| Internet Settings &rarr;  Graph File Settings
| Cumulus upgrade available
| alldailytempsumdata.json &rarr; Copy
| 24 (default set only since release 3.9.6)
| Use the spin button to select the number of hours (specified in '''Latch h(ou)rs''' column) that the "latch" is maintained if previous setting is set to 1 (tick on settings page)
|-
| UpgradeAlarmNotify=0
| (always)
| [Alarms]
| Release 3.9.3
| Alarm Settings
| Cumulus upgrade available
| 0 (disabled)
| 0 (disabled)
| If tick '''Notify'', MX will show the status of this alarm on the [[MX_Administrative_Interface#Dashboard|'''Dashboard''' page of the interface]]
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempsumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| UpgradeAlarmSet=0
| Copy-availabledata=0
| (always)
| [FTP site]
| [Alarms]
| Release 3.12.0
| Release 3.9.3
| ^ (once only)
| Alarm Settings
| Internet Settings &rarr;  Graph File Settings
| Cumulus upgrade available
| availabledata.json  &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| If tick '''Enable''', the alarm will be triggered if outside temperature rapidly changes (in legacy Cumulus this was taking trend for the last hour, the developer has not specified what period applies for MX) by, or more than, the selected '''Value''' in earlier parameter
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| UpgradeAlarmSound=0
| Copy-dailyrain=0
| (always)
| [FTP site]
| [Alarms]
| Release 3.12.0
| Release ???
| ^
| Alarm Settings
| Internet Settings &rarr;  Graph File Settings
| Cumulus upgrade available
| dailyrain.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| If tick '''Play sound''', if the alarm is triggered, then the file specified in next parameter will be played
|-
| UpgradeAlarmSoundFile=alarm.mp3
| (always)
| [Alarms]
| Release ???
| Alarm Settings
| Cumulus upgrade available
| alarm.mp3
| Specify a file name for a music file stored in the CumulusMX\interface\sounds or CumulusMX/interface/sounds folder
|-
| UseHTML=0
| (always)
| [Alarms]
| Release 3.11.0
| Alarm Settings
| '''Email uses HTML text formatting'''
| 0 (UTF-8 plain text)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you wish to use HTML encoding format for your customised emails
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) if you are happy to use the default emails text in UTF-8 plain text encoding
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| User=
| Copy-dailytemp=0
| [FTP site]
| Release 3.12.0
| ^
| ^
| [SMTP]
| Internet Settings &rarr;  Graph File Settings
| Release 3.11.0
| dailytemp.json &rarr; Copy
| Internet Settings &rarr; Email Server Settings
| 0 (disabled)
| Username
| Simple tick or not
| (blank)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailytemp.json]] file to your local web server (need to select "Generate" too)
| Text box where you enter user name needed to authenticate with your SMTP email server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|}
|-
 
| Copy-graphconfig=0
==Charts==
| [FTP site]
{{Template:WorkInProgressBanner}} Charts have evolved rapidly in MX development, this table needs verification by somebody who uses the functionality documented here. Can you be the contributor to bring it up to date?
| Release 3.12.0
 
| ^ (once only)
{| class="wikitable" border="1"
| Internet Settings &rarr; Graph File Settings
| graphconfig.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
!style="width:30px" | Parameter Line Entry
| Copy-humdata=0
!style="width:100px" | File Section
| [FTP site]
!style="width:100px" | Introduced
| Release 3.12.0
!style="width:100px" | MX Section
| ^
!style="width:60px" | Label on Settings page
| Internet Settings &rarr; Graph File Settings
!style="width:20px" | Default
| humdata.json &rarr; Copy
!style="width:600px" | Description
| 0 (disabled)
|-
| Simple tick or not
| GraphHours=24
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[humdata.json]] file to your local web server (need to select "Generate" too)
| [Graphs]
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Legacy Cumulus
|-  
| Station Settings &rarr; Graphs
| Copy-pressdata=0
| Graph hours
| [FTP site]
| 24 (2 rolling days worth of values)
| Release 3.12.0
| For those plots that show values (if available) minute by minute, how many days back to go. Some people prefer to set this to 48 or 96, that means uploading a lot more data in the [[:Category:JSON_Files|.json files]], but it shows more on charts
| ^
|-
| Internet Settings &rarr; Graph File Settings
| AppTempVisible=1
| pressdata.json &rarr; Copy
| [Graphs]
| 0 (disabled)
| MX release 3.7.0 - b3089
| Simple tick or not
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[pressdata.json]] file to your local web server (need to select "Generate" too)
| Apparent temperature
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Ticked (shown in Cumulus.ini as 1)
|-  
| Simple tick or not indicating whether you want to see Australian Apparent Temperature plotted on Charts
| Copy-raindata=0
|-
| [FTP site]
| BaseTemperature1=
| Release 3.12.0
| [GrowingDD] and [TempSum]
| ^
| Release 3.11.0 - b3129
| Internet Settings &rarr; Graph File Settings
| Station Settings &rarr; Growing Degree Days
| raindata.json &rarr; Copy
| Base temperature #1
| 0 (disabled)
| Depends on selected temperature units (not quite same)
| Simple tick or not
* (Celsius) (equivalent to 41 <sup>o</sup>Fahrenheit)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[raindata.json]] file to your local web server (need to select "Generate" too)
* (Fahrenheit) 40 (equivalent to 4.44 <sup>o</sup>Celsius)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Base temperature for series 1
|-
|-
| Copy-solardata=0
| BaseTemperature2=
| [FTP site]
| [GrowingDD] and [TempSum]
| Release 3.12.0
| Release 3.11.0 - b3129
| ^
| Station Settings &rarr; Growing Degree Days
| Internet Settings &rarr; Graph File Settings
| Base temperature #1
| solardata.json &rarr; Copy
| Depends on selected temperature units (equivalent)
| 0 (disabled)
* (Celsius) 10
| Simple tick or not
* (Fahrenheit) 50
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[solardata.json]] file to your local web server (need to select "Generate" too)
| Base temperature for series 2
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
|-
| Cap30C=1
| Copy-sunhours=0
| [GrowingDD]
| [FTP site]
| Release3.11.0 - b3129
| Release 3.12.0
| Station Settings &rarr; Growing Degree Days
| ^
| Cap GDD at 30°C / 86°F
| Internet Settings &rarr; Graph File Settings
| Ticked (shown in Cumulus.ini as 1)
| sunhours.json &rarr; Copy
| Simple tick or not indicating whether you want growing degree days capped and not incremented at high temperatures (threshold shown in setting name)  
| 0 (disabled)
|-
| Simple tick or not
| ChartMaxDays=31
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[sunhours.json]] file to your local web server (need to select "Generate" too)
| [Graphs]
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
| Legacy Cumulus
|-  
| Station Settings &rarr; Graphs
| Copy-tempdata=0
| Graph Days
| [FTP site]
| 31 (daily values)
| Release 3.12.0
| For those plots that show recent daily values, this states how many of them to plot
| ^
|-
| Internet Settings &rarr; Graph File Settings
| Colour0=#058DC7, Colour1=#50B432, Colour2=#ED561B, Colour3=#DDDF00, Colour4=#24CBE5, and Colour5=#64E572
| tempdata.json &rarr; Copy
| [Select-a-Chart]
| 0 (disabled)
| Release 3.9.7 - b3107
| Simple tick or not
| ???
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[tempdata.json]] file to your local web server (need to select "Generate" too)
| ???
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Hex colours as shown in parameter list
|-
| Colour of line used for plotting the respective series
| Copy-wdirdata=0
|-
| [FTP site]
| DailyAvgTempVisible=1
| Release 3.12.0
| [Graphs]
| ^
| Release 3.11.0 - b3129
| Internet Settings &rarr; Graph File Settings
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| wdirdata.json &rarr; Copy
| Daily Average Temperature
| 0 (disabled)
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not
| Simple tick or not indicating whether you want to see Daily (integrated) Average temperature plotted on Charts
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| DailyMaxTempVisible=1
|-  
| [Graphs]
| Copy-websitedata=0
| Release 3.11.0 - b3129
| [FTP site]
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Release 3.12.0
| Daily Maximum Temperature
| ^
| Ticked (shown in Cumulus.ini as 1)
| Internet Settings &rarr; Standard File Settings
| Simple tick or not indicating whether you want to see Daily Maximum temperature plotted on Charts
| websitedata.json &rarr; Copy
|-
| 0 (disabled)
| DailyMinTempVisible=1
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
| [Graphs]
 
| Release 3.11.0 - b3129
Simple tick or not
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the resulting websitedata.json to your local web server
| Daily Minimum Temperature
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Ticked (shown in Cumulus.ini as 1)
|-  
| Simple tick or not indicating whether you want to see Daily Minimum temperature plotted on Charts
| Copy-winddata=0
|-
| [FTP site]
| DPVisible=1
| Release 3.12.0
| [Graphs]
| ^
| MX release 3.7.0 - b3089
| Internet Settings &rarr; Graph File Settings
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| winddata.json &rarr; Copy
| Dew point
| 0 (disabled)
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not
| Simple tick or not indicating whether you want to see Dew Point plotted on Charts
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[winddata.json]] file to your local web server (need to select "Generate" too)
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| FeelsLikeVisible=1
|-  
| [Graphs]
| Copy-wxnow=0
| MX release 3.7.0 - b3089
| [FTP site]
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Release 3.12.0
| Dew point
| ^ (disabled)
| Ticked (shown in Cumulus.ini as 1)
| Internet Settings &rarr; Standard File Settings
| Simple tick or not indicating whether you want to see Feels Like Temperature plotted on Charts
| wxnow.txt &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| CopyMoonImage=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Moon Image
| Copy Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy moon image file to your local web server (need to select "Generate Moon Image" see '''MoonImageEnabled=''' too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| GrowingDegreeDaysVisible1=1
| Create-airquality=0
| [Graphs]  
| [FTP site]
| Release3.11.0 - b3129
| Release 3.10.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Degree Days
| ^
| Growing Degree Days series #1  
| Internet Settings &rarr; Graph File Settings
| Ticked (shown in Cumulus.ini as 1)
| airquality.json &rarr; Generate
| Simple tick or not indicating whether you want to see series 1 plotted on Charts
| 1 (enabled)
|-
| Simple tick or not
| GrowingDegreeDaysVisible2=1
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the airquality.json file
| [Graphs]
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Release3.11.0 - b3129
|-  
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Degree Days
| Create-alldailydegdaydata=0
| Growing Degree Days series #2
| [FTP site]
| Ticked (shown in Cumulus.ini as 1)
| Release 3.10.0
| Simple tick or not indicating whether you want to see series 2 plotted on Charts
| ^
|-
| Internet Settings &rarr; Graph File Settings
| HIVisible=1
| alldailydegdaydata.json &rarr; Generate
| [Graphs]
| 1 (enabled)
| MX release 3.7.0 - b3089
| Simple tick or not
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailydegdaydata.json]] file
| Dew point
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Ticked (shown in Cumulus.ini as 1)
|-  
| Simple tick or not indicating whether you want to see USA Heat Index plotted on Charts
| Create-alldailyhumdata=0
|-
 
| HumidexVisible=1
| [FTP site]
| [Graphs]
| Release 3.10.0
|  MX release 3.7.0 - b3089
| ^
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Internet Settings &rarr; Graph File Settings
| Dew point
| alldailyhumdata.json &rarr; Generate
| Ticked (shown in Cumulus.ini as 1)
| 1 (enabled)
| Simple tick or not indicating whether you want to see Canadian Humidity Index plotted on Charts
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyhumdata.json]] file
| InHumVisible=1
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| [Graphs]
|-  
| MX release 3.7.0 - b3089
| Create-alldailypressdata=0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Humidity Data
| [FTP site]
| Dew point
| Release 3.10.0
| Ticked (shown in Cumulus.ini as 1)
| ^
| Simple tick or not indicating whether you want to see Indoor Relative Humidity plotted on Charts
| Internet Settings &rarr; Graph File Settings
|-
| alldailypressdata.json &rarr; Generate
| InTempVisible=1
| 1 (enabled)
| [Graphs]
| Simple tick or not
|  MX release 3.7.0 - b3089
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailypressdata.json]] file
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Dew point
|-  
| Ticked (shown in Cumulus.ini as 1)
| Create-alldailyraindata=0
| Simple tick or not indicating whether you want to see Indoor Temperature plotted on Charts
| [FTP site]
|-
| Release 3.10.0
| OutHumVisible=1
| ^
| [Graphs]
| Internet Settings &rarr; Graph File Settings
| MX release 3.7.0 - b3089
| alldailyraindata.json &rarr; Generate
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Humidity Data
| 1 (enabled)
| Dew point
| Simple tick or not
| Ticked (shown in Cumulus.ini as 1)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyraindata.json]] file
| Simple tick or not indicating whether you want to see Outdoor Relative Humidity plotted on Charts
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Series0= to Series5=
| [Select-a-Chart]
| Release 3.9.7 - b3107
| ???
| ???
| 0 (disabled)
| Name of parameter to plot (in series 0 to 5) e.g. "Pressure", "Wind Gust", "Temperature", "Rainfall Rate", "Wind Bearing"
|-
| SolarVisible=1
| [Graphs]
| MX release 3.10.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Solar Data
| UV Index
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not indicating whether you want to see Solar radiation plotted on Charts
|-  
|-  
| SunshineVisible=1
| Create-alldailysolardata=0
| [Graphs]
| [FTP site]
| MX release 3.10.0
| Release 3.10.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Solar Data
| ^
| UV Index
| Internet Settings &rarr; Graph File Settings
| Ticked (shown in Cumulus.ini as 1)
| alldailysolardata.json &rarr; Generate
| Simple tick or not indicating whether you want to see Sunshine Hours plotted on Charts
| 1 (enabled)
|-
| Simple tick or not
| TempSumVisible0=1
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailysolarydata.json]] file
| [TempSum]
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
| Release 3.11.0 - b3129
|-  
| Station Settings &rarr; Annual Temperature Sum
| Create-alldailytempdata=0
| Annual Temperature Sum 0
| [FTP site]
| Ticked (shown in Cumulus.ini as 1)
| Release 3.10.0
| Simple tick or not indicating whether you want to see Annual Temperature Sum series 0 plotted on Charts
| ^
|-
| Internet Settings &rarr;  Graph File Settings
| TempSumVisible1=1
| alldailytempdata.json &rarr; Generate
| [TempSum]
| 1 (enabled)
| Release 3.11.0 - b3129
| Simple tick or not
| Station Settings &rarr; Annual Temperature Sum
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempdata.json]] file
| Annual Temperature Sum #1  
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Ticked (shown in Cumulus.ini as 1)
|-
| Simple tick or not indicating whether you want to see Annual Temperature Sum minus baseline 1  plotted on Charts
| Create-alldailywinddata=0
|-
| [FTP site]
| TempSumVisible2=1
| Release 3.10.0
| [TempSum]
| ^
| Release 3.11.0 - b3129
| Internet Settings &rarr;  Graph File Settings
| Station Settings &rarr; Annual Temperature Sum
| alldailywinddata.json &rarr; Generate
| Annual Temperature Sum #2
| 1 (enabled)
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not
| Simple tick or not indicating whether you want to see Annual Temperature Sum minus baseline 2  plotted on Charts
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailywinddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Create-alltempsumdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Graph File Settings
| alldailytempsumdata.json &rarr; Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempsumdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Create-availabledata=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| availabledata.json  &rarr; Generate
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[availabledata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| TempSumYearStart=
| Create-dailyrain=0
| [TempSum]
| [FTP site]
| Release 3.11.0 - b3129
| Release 3.10.0
| Station Settings &rarr; Annual Temperature Sum
| ^
| Year summation starting month
| Internet Settings &rarr; Graph File Settings
| Depends on hemisphere
| dailyrain.json &rarr; File Transfer
* (Northern hemisphere) 1 = January
| 1 (enabled)
* (Southern hemisphere) 7 = July
| Simple tick or not
| Enter as a number the month for which (on first of that month) annual temperature summation is reset to zero
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailyrain.json]] file
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| TempVisible=1
| [Graphs]
|  MX release 3.7.0 - b3089
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| Dew point
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not indicating whether you want to see Outdoor Temperature plotted on Charts
|-
| UVVisible=1
| [Graphs]
| MX release 3.10.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Solar Data
| UV Index
| Ticked (shown in Cumulus.ini as 1)
| Simple tick or not indicating whether you want to see Ultra Violet Index plotted on Charts
|-  
|-  
| WCVisible=1
| Create-dailytemp=0
| [Graphs]
| [FTP site]
| MX release 3.7.0 - b3089
| Release 3.10.0
| Station Settings &rarr; Graphs &rarr; Visibility &rarr; Temperature Data
| ^
| Dew point
| Internet Settings &rarr; Graph File Settings
| Ticked (shown in Cumulus.ini as 1)
| dailytemp.json &rarr; File Transfer
| Simple tick or not indicating whether you want to see Wind Chill plotted on charts
| 1 (enabled)
|-
| Simple tick or not
| YearStarts=
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
| [GrowingDD]
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Release 3.11.0 - b3129
|-  
| Station Settings &rarr; Growing Degree Days
| Create-graphconfig=0
| Growing season starting month
| [FTP site]
| Depends on hemisphere
| Release 3.10.0
* (Northern hemisphere) 1 = January
| ^ (once only)
* (Southern hemisphere) 7 = July
| Internet Settings &rarr; Graph File Settings
| Enter as a number the month for which (on first of that month) Growing degree days is reset to zero
| graphconfig.json &rarr; Generate
|}
| 1 (enabled)
 
| Simple tick or not
==Data Logging==
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[graphconfig.json]] file
 
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Available in all Cumulus releases
|-
* File Section is [Station]
| Create-humdata=0
{| class="wikitable" border="1"
| [FTP site]
|-
| Release 3.10.0
!style="width:30px" | Parameter Line Entry
| ^
!style="width:100px" | Shown on Settings page?
| Internet Settings &rarr;  Graph File Settings
!style="width:100px" | MX Section
| humdata.json &rarr; Generate
!style="width:60px" | Label on Settings page
| 1 (enabled)
!style="width:20px" | Default
| Simple tick or not
!style="width:600px" | Description
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[humdata.json]] file
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| DataLogInterval=2
|-
| (Always)
| Create-pressdata=0
| Station settings &rarr; General Settings
| [FTP site]
| Log interval
| Release 3.10.0
| 2 (10 minutes)
| ^
| Drop-down:
| Internet Settings &rarr;  Graph File Settings
* 0 = 1 minute between MX logs into the one to three [[Monthly_log_files]] (i.e. [[Standard log files]], and optionally [[Extra Sensor Files]], [[Air_Link_Log.txt]])
| pressdat.json &rarr; Generate
* 1 = 5 minutes between MX logging lines
| 1 (enabled)
* 2 = 10 minutes between MX logging lines
| Simple tick or not
* 3 = 15 minutes between MX logging lines
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[pressdata.json]] file
* 4 = 20 minutes between MX logging lines
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* 5 = 30 minutes between MX logging lines
|-  
| Create-raindata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Graph File Settings
| raindata.json &rarr; Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[raindata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-solardata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| solardata.json &rarr; Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[solardata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
|-
| LogExtraSensors=0
| Create-tempdata=1
| (Depends on station type)
| [FTP site]
| Station settings &rarr; Common Options
| Release 3.10.0
| Extra sensors
| ^
| 0 (disabled)
| Internet Settings &rarr; Graph File Settings
|Simple tick or not
| dailytemp.json &rarr; Generate
* Tick (value shown as 1 in Cumulus.ini) if your weather station can output readings to be logged in [[Extra Sensor Files]]
| 1 (enabled)
* Don't tick (value shown as 0 in Cumulus.ini) if you have nothing to log to Extra Sensor Files.
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
| NoSensorCheck=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| (not yet on a settings page)
|-  
| (not known)
| Create-sunhours=0
| (not known)
| [FTP site]
| 0 (normal)
| Release 3.10.0
| Boolean:
| ^
* 0 = MX will stop if any of the minimum set of sensors listed below fails
| Internet Settings &rarr;  Graph File Settings
* 1 = MX will continue to run, even if any of the minimum set of sensors listed below fails
| dailytemp.json &rarr; Generate
 
| 1 (enabled)
Minimum set of sensors:
| Simple tick or not
# Current air temperature
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
# Current Relative Humidity
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
# At least one wind speed
|-
# Current air pressure (absolute or sea-level)
| Create-tempdata=0
Cumulus will stop processing any information from a weather station unless the above 4 source values are being supplied and reveal they are being updated (failure is set is after a total of 6 unsuccessful consecutive attempts to read each of these).
| [FTP site]
|-
| Release 3.10.0
| RainDayThreshold=-1
| ^
| (with warning: "Here be dragons!")
| Internet Settings &rarr;  Graph File Settings
| legacy cumulus
| tempdata.json &rarr; Generate
| Only from Release 3.12.0
| 1 (enabled)
| Depends on release:
| Simple tick or not
* (3.5.1 to 3.11.4) Manual edit of file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[tempdata.json]] file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-1 (that represents 0.2 mm or 0.01 inches)
|-  
| The amount of rainfall that must be collected before MX treats today as a wet day
| Create-wdirdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| wdirdata.json &rarr; Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[wdirdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-websitedata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Graph File Settings
| websitedata.json &rarr; Generate
| 1 (enabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]


''The intention is this will represent more than one tip,as the first tip might contain some rain from an earlier day''
Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to process the '''websitedataT.json''' file into websitedata.json
| RolloverHour=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| (Always)
|-  
| Station settings &rarr; Log Rollover
| Create-winddata=0
| Time
| [FTP site]
| 0 (midnight)
| Release 3.10.0
| Radio type selection:
| ^
* 0 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches midnight
| Internet Settings &rarr; Graph File Settings
* 1 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time
| winddata.json &rarr; Generate
|-
| SnowDepthHour=0
| (with warning: "Here be dragons!")
| legacy cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
| Snow depth hour
| 0 (midnight)
| Spin selector of 0 to 23: Defines hour from which entries in [[Weather Diary]] for current calendar day are used. Prior to this hour the weather diary will be searched for Calendar yesterday
|-
| StartDate=
| (with warning: "Here be dragons!")
| Station Settings &rarr; Common Options &rarr; Advanced Options
| Records Began date
| (Set when you first use Cumulus)
| Format used is determined by locale used for running MX.  If this date is edited, keep to same format. MX generally (see [[Calculate_Missing_Values#CreateMissing.exe]] for exceptions) ignores any data file entries prior to this date.
|-
| UseDataLogger=1
| (probably determined by station type)
| (not known)
| (not known)
| 1 (enabled)
| 1 (enabled)
|Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if your weather station has its own storage, so MX can do a catch up when it first starts and read any "archive data"
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[winddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) if your weather station has no storage, and therefore MX cannot capture any readings when it is not running
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Use10amInSummer=1
| Create-wxnow=0
| (Always)
| [FTP site]
| Station settings &rarr; Log Rollover
| Release 3.10.0
| Use 10am in Summer
| ^ (disabled)
| 1 (normal)
| (depends on release)
| Tick box:
* (releases 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
* 0 = If "Daylight Saving Time" (DST) applies in Summer, MX is to use 9 am local time
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
* 1 = Normal behaviour:
| wxnow.txt &rarr; Generate
** If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
| 0 (disabled)
** If MX would do  [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time, then it waits until 10 a.m. local time while DST is in effect
| Simple tick or not
|}
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a [[wsnow.txt]] file
 
* Don't tick (value shown as 0 in Cumulus.ini) to disable
==Database==
|-
 
| DeleteBeforeUpload=0
 
| [FTP site]
* Available from beta MX.
| legacy Cumulus
* File Section is [MySQL]
| (always)
{| class="wikitable" border="1"
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| Delete before upload
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to delete existing file (with same name) on the web server before it creates the new file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (this is the option appropriate to most servers)
|-
|-
!style="width:30px" | Parameter Line Entry
| Directory=
!style="width:100px" | Shown on Settings page?
| [FTP site]
!style="width:100px" | MX Section
| Legacy Cumulus
!style="width:60px" | Label on Settings page
| (always)
!style="width:20px" | Default
| Internet Settings &rarr; Web/FTP Site
!style="width:600px" | Description
| Remote FTP Directory
|-
| CustomMySqlMinutesCommandString=
| only if "Custom Minutes Enabled"
| MySQL Settings &rarr; Monthly log file upload
| SQL command
| (blank)
| (blank)
| SQL to be obeyed at the interval defined in "CustomMySqlMinutesIntervalIndex"
| Directory (including path) on your server to which FTP (if 'Enabled' is enabled) will upload the files.
*value is left Blank, default, the root position specified by ftp server
*A path from the starting point as the position specified by ftp server
 
Not used for ExtraRemoteNN parameters
|-
| DisableEPSV=0
| [FTP site]
| Beta Release 3.0.0  build 3045
| No
| Still Change directly in file as at release 3.11.x
| (n/a )
| 0
| *0 = Disabled (default)
*1 = Enabled, to use Extended Passive FTP-mode
|-
|-
| CustomMySqlMinutesIntervalIndex=6
| DisableFtpsExplicit=0
| only if "Custom Minutes Enabled"
| [FTP site]
| MySQL Settings &rarr; Monthly log file upload
| Release  3.4.0 - Build 3064
| Interval
| No
| 6 = 10 minutes
| Change directly in file as at release 3.11.x
| Time between custom SQL uploads:
| (n/a )
* 0 = 1 minute
| 0
* 1 = 2 minutes
| (change value following attribute)
* 2 = 3 minutes
*0 = Disabled (default) use FTPS Explicit mode
* 3 = 4 minutes
*1 = Enabled, to use FTPS Implicit mode
* 4 = 5 minutes
|-  
* 5 = 6 minutes
| Enabled=1
* 6 = 10 minutes
| [FTP site]
* 7 = 12 minutes
| Release 3.12.0
* 8 = 20 minutes
| (always) Controls whether ^ settings have "File Transfer" option enabled
* 9 = 30 minutes
| Internet Settings &rarr; Interval Configuration
* 10 = 1 hour (60 minutes)
| Enable file transfer of standard files
|-
| 1 (enabled)
| CustomMySqlMinutesEnabled=0
| Simple tick or not
| (always)
* Tick (value shown as 1 in Cumulus.ini) for MX to enable file transfer of standard files (see rows marked ^ for further selections)
| MySQL Settings
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Custom Minutes Enabled
| Not ticked (shown as 0 in Cumulus.ini)
| Enable the optional functionality to run SQL at a selected interval in minutes
|-
| CustomMySqlSecondsCommandString=
| only if "Custom Seconds Enabled"
| MySQL Settings &rarr; Monthly log file upload
| SQL command
| (blank)
| SQL to be obeyed at the interval defined in "CustomMySqlSecondsInterval"
|-
| CustomMySqlSecondsInterval=10
| only if "Custom Seconds Enabled"
| MySQL Settings &rarr; Monthly log file upload
| Interval
| 10 (seconds)
| Time between custom SQL uploads
|-
| CustomMySqlSecondsEnabled=0
| (always)
| MySQL Settings
| Custom Minutes Enabled
| Not ticked (shown as 0 in Cumulus.ini)
| Enable the optional functionality to run SQL at a selected interval in seconds
|-
| Database=
| when section opened
| MySQL Settings &rarr; Server Details
| Database name
| (blank)
| The name given to the database that includes the table(s) you want to update
|-
| DayfileMySqlEnabled=0
| (always)
| MySQL Settings
| Dayfile Enabled
| Not ticked (shown as 0 in Cumulus.ini)
| Enable the automatic upload to the table named in "DayfileTable" within the database named in "Database"
|-
|-
| DayfileTable=Dayfile
| EnableLocalCopy=0
| when "Dayfile Enabled" is ticked and the next section is opened
| [FTP site]
| MySQL Settings &rarr; Dayfile.txt upload
| Release 3.12.0
| Table name
| (always) Controls whether ^ settings have "Copy" option enabled
| Dayfile
| Internet Settings &rarr; Interval Configuration
| Enables you to choose the name for the database table to be updated when "DayfileMySqlEnabled" is ticked
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to enable copying of files (see rows marked ^ for further selections)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Host=
| EnableRealtime=1
| when section opened
| [FTP site]
| MySQL Settings &rarr; Server Details
| Legacy Cumulus
| Host name
| (blank)
| Enter the database server name or Internet Protocol address
|-
| MonthlyMySqlEnabled=0
| (always)
| (always)
| MySQL Settings
| Internet Settings &rarr; Realtime Settings
| Monthly Log Enabled
| Enable Realtime
| Not ticked (shown as 0 in Cumulus.ini)
| 0 (disabled)
| Enable the automatic upload to the table named in "MonthlyTable" within the database named in "Database"
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a timer that will permit real time actions
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| MonthlyTable=Monthly
| Ftp-airquality=0
| when "Dayfile Enabled" is ticked and the next section is opened
| [FTP site]
| MySQL Settings &rarr; Monthly log file upload
| Release 3.10.0
| Table name
| ^
| Monthly
| Internet Settings &rarr; Graph File Settings
| Enables you to choose the name for the database table to be updated when "MonthlyMySqlEnabled" is ticked
| airquality.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the airquality.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
|-  
|-  
| Pass=
| Ftp-alldailydegdaydata=0
| when section opened
| [FTP site]
| MySQL Settings &rarr; Server Details
| Release 3.10.0
| Password
| ^
| (blank)
| Internet Settings &rarr; Graph File Settings
| Enter the password needed to access the database server specified in "Host"
| alldailydegdaydata.json &rarr; File Transfer
|-
| 1 (enabled)
| Port=3306
| Simple tick or not
| when section opened
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailydegdaydata.json file to your local web server (need to select "Generate" too)
| MySQL Settings &rarr; Server Details
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Port
| 3306
| Enter the port used to access the database server
|-
| RealtimeMySql1MinLimit=0
| When section opened
| MySQL Settings &rarr; Raltime.txt upload
| Limit real time table inserts to once a minute 
| Not ticked (shown as 0 in Cumulus.ini)
| Enable the optional functionality to limit database uploads, if your real time interval has been set to less than 60 seconds
|-  
|-  
| RealtimeMySqlEnabled=0
| Ftp-alldailyhumdata=0
| (always)
| [FTP site]
| MySQL Settings
| Release 3.10.0
| Realtime enabled  
| ^
| Not ticked (shown as 0 in Cumulus.ini)
| Internet Settings &rarr;  Graph File Settings
| Enable the automatic upload to the table named in "RealtimeTable" within the database named in "Database"
| alldailyhumdata.json &rarr; File Transfer
|-
| 1 (enabled)
| RealtimeRetention=
| Simple tick or not
| When section opened
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
| MySQL Settings &rarr; Raltime.txt upload
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| '''Data Retention value''' and '''Data Retention unit'''
|-  
| "7" and "Days"
| Ftp-alldailypressdata=0
| The value field will take any number, the unit field is a dropdown:
| [FTP site]
* Seconds
| Release 3.10.0
* Minutes
| ^
* Hours
| Internet Settings &rarr; Graph File Settings
* Days
| alldailypressdata.json &rarr; File Transfer
* Weeks
| 1 (enabled)
* Months
| Simple tick or not
Taken together, these determine the period for which rows are kept in the table named in "RealtimeTable", any row older than this specification will be deleted as part of the automatic SQL
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| RealtimeTable=Realtime
|-  
| When section opened
| Ftp-alldailyraindata=0
| MySQL Settings &rarr; Raltime.txt upload
| [FTP site]
| Table name
| Release 3.10.0
| Realtime
| ^
| Enables you to choose the name for the database table to be updated when "RealtimeMySqlEnabled" is ticked
| Internet Settings &rarr; Graph File Settings
|-
| alldailyraindata.json &rarr; File Transfer
| User=
| 1 (enabled)
| when section opened
| Simple tick or not
| MySQL Settings &rarr; Server Details
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
| User name
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| (blank)
|-  
| Enter the username associated with "Pass"
| Ftp-alldailysolardata=0
|}
| [FTP site]
 
| Release 3.10.0
==Debugging==
| ^
 
| Internet Settings &rarr; Graph File Settings
* Available from beta MX.
| alldailysolardata.json &rarr; File Transfer
* File Section is [Station]
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:300px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
| Logging=1
| Depends on release installed:
# Alternatives:
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: Logging = 1, then restart Cumulus MX.
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Debug logging
| 0 (disabled)
| 0 (disabled)
| This adds extra information about data transfers between your weather station and MX.
It was introduced originally for Davis stations only, but later (can someone insert here the relevant release) extended to cover more stations.
|-
| DataLogging=1
| Depends on release installed:
# Alternatives:
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: DataLogging = 1, then restart Cumulus MX.
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Debug logging
| 0 (disabled)
| This adds extra information about both data transfers initiated from MX, and all the internal MX processes.
|}
== Display Options ==
* File Section is '''[Display]'''
* MX Section is '''Station Settings &rarr; Display Options'''
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Introduced
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
| DisplaySolarData=0
| ??? 3.10.0 ???
| Display Solar data
| Unticked (shown as 0 in Cumulus.ini)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display solar data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display solar data
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
|-  
| DisplayUvData=0
| Ftp-alldailytempdata=0
| ??? 3.10.0 ???
| [FTP site]
| Display UV-I data  
| Release 3.10.0
| Unticked (shown as 0 in Cumulus.ini)  
| ^
| Internet Settings &rarr; Graph File Settings
| alldailytempdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-alldailywinddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailywinddata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display ultra-violet intensity data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display UV intensity data
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| NumWindRosePoints=16
| Ftp-alltempsumdata=0
| Legacy Cumulus
| [FTP site]
| Number of wind rose points
| Release 3.10.0
| 16
| ^
| Drop-down determining if weather station bearing supplied by weather station is to be converted to 8 or 16 compass directions (i.e. whether to include or exclude (in English) NNE, ENE, ESE, SSE, SSW, WSW, WNW, and NNW
| Internet Settings &rarr;  Graph File Settings
* 8 points
| alltempsumdata.json &rarr; File Transfer
* 16 points
| 1 (enabled)
Despite what it says in the hint on the settings page, leave at default whichever weather station type you use, unless this actually causes you a problemThe parameter was introduced by Steve LoftDavis wind vanes use a potentiometer to measure wind direction so send Cumulus a bearing that can vary continuously between 1 and 360 degrees. Fine Offset wind vanes use magnetic switches that depend on the magnet under the moving part selecting two switches in the fixed part for the vane being exactly in-between compass directions, and selecting one switch for the main 8 directions and slightly away from the main directions; so they have a bias against sending Cumulus the in-between directions.
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alltempsumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-availabledata=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings &rarr; Graph File Settings
| availabledata.json &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| UseApparent=1
| Ftp-dailyrain=0
| ??? MX 3.6.0 or 3.10.0 ???
| [FTP site]
| Use Apparent Temperature
| Release 3.10.0
| Ticked (shown as 1 in Cumulus.ini)
| ^
| Internet Settings &rarr;  Graph File Settings
| dailyrain.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display apparent temperature in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus prior to release 3.6.0
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to display feels like temperature  in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus from release 3.6.0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|}
|-
 
| Ftp-dailytemp=0
==Extra Web Files==
| [FTP site]
 
| Release 3.10.0
There are 100 occurrences of each parameter in Cumulus.ini, and therefore each parameter has a base name followed by numbers 0 to 99.
| ^
 
| Internet Settings &rarr;  Graph File Settings
The settings interface presents the rows on multiple pages, the rows are not numbered, so you have to do some counting to work out which row in the admin interface page corresponds with which parameter in Cumulus.ini file.
| dailyrain.json &rarr; File Transfer
 
| 1 (enabled)
{| class="wikitable" border="1"
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-graphconfig=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| graphconfig.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
!style="width:30px" | Parameter Line Entry
| Ftp-humdata=0
!style="width:100px" | Label on Settings page
| [FTP site]
!style="width:20px" | Default
| Release 3.10.0
!style="width:800px" | Description
| ^
|-
| Internet Settings &rarr;  Graph File Settings
|style="background:lightgray;"|[FTP site]  
| humdata.json &rarr; File Transfer
|
| 1 (enabled)
|
| Simple tick or not
|style="background:lightgray;"|Section name
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[humdata.json]] file to your local web server (need to select "Generate" too)
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|ExtraLocal0= to ExtraLocal99=
|-  
|Local File Name
| Ftp-pressdata=0
|(empty)
| [FTP site]
|You can enter:
| Release 3.10.0
* A relative path name, with respect to the "CumulusMX" root folder
| ^
** e.g.  '''./data/dayfile.txt''' (Note: this is the [[Daily_Summary|daily summary log file]], see link for how it can be used on a web server)
| Internet Settings &rarr; Graph File Settings
** e.g. '''./webMX/betel_monthlyrecord_liteMXT.html''' (Note: this is a third party [[Cumulus_template_file|template file]] - see [https://cumulus.hosiene.co.uk/viewtopic.php?f=14&t=7500 Alternative Monthly Extremes using <#webtag>s]
| pressdata.json &rarr; File Transfer
** e.g. '''./web/trendsT.htm''' (Note: That file is not part of default web site any more, but serves as another example
| 1 (enabled)
* A full path name for a file on the computer running MX
| Simple tick or not
** e.g. '''/home/pi/documents/myFile'''
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[pressdata.json]] file to your local web server (need to select "Generate" too)
** e.g. '''C:\Users\Public\Documents\working.txt'''
* Don't tick (value shown as 0 in Cumulus.ini) to disable
*You can place any of the following special tags into the entry
|-
** These should be typed as shown on their own
| Ftp-raindata=0
*** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports 
| [FTP site]
***  '''<currentlogfile>''',  '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files  e.g. ExtraLocal3=<currentlogfile>
| Release 3.10.0
|-
| ^
|ExtraRemote0= to ExtraRemote99=
| Internet Settings &rarr;  Graph File Settings
|Destination Filename
| raindata.json &rarr; File Transfer
|(empty)
| 1 (enabled)
|Defines where MX is to upload file to
| Simple tick or not
* If file transfer is requested (see below), the file path should be expressed starting at the FTP/FTPS/SFTP root
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[raindata.json]] file to your local web server (need to select "Generate" too)
**I can't tell you what the file path is for your web server, but I can give a couple of examples to steer you
* Don't tick (value shown as 0 in Cumulus.ini) to disable
*** e.g. httpdocs/dayfile.txt
|-
*** e.g. public_html/thismonthyear.htm
| Ftp-solardata=0
* If the FTP is not ticked, the file path should be full path for a file on the computer running MX
| [FTP site]
** e.g. /var/www/html/weather/images/moon.png could be destinatation for uploading the MX generated moon image to a Linux hosted [[Your_Own_Server|server]]
| Release 3.10.0
** e.g. /var/www/html/weather/webfilesMX/tempdata.json for uploading one of the [[:Category:JSON_Files|files with graph data]] to a Linux hosted [[Your_Own_Server|server]]
| ^
*You can place any of the following special tags into the entry
| Internet Settings &rarr;  Graph File Settings
** These should be typed as shown as part of the destination path, note that they can be used:
| solardata.json &rarr; File Transfer
*** either to represent the final filename part of the path e.g. ExtraRemote3=/var/www/html/weather/monthly/<currentlogfile>
| 0 (disabled)
*** or to modify a filename, so it becomes unique to a particular month e.g. ExtraRemote0=/var/www/html/weather/cumulus_generated/savedFiles/web_tags_real_time_<currentlogfile>.inc
| Simple tick or not
** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[solardata.json]] file to your local web server (need to select "Generate" too)
**  '''<currentlogfile>''',  '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
|-
|ExtraProcess0= to ExtraProcess99=
| Ftp-sunhours=0
|Process
| [FTP site]
|0
| Release 3.10.0
|Simple tick or not
| ^
* Tick (value shown as 1 in Cumulus.ini) if the local file is a [[Cumulus_template_file|template file]], see [[Customised_templates#What_is_meant_by_.27Cumulus_processes_templates.27|here]] for full explanation of '''Process'''
| Internet Settings &rarr;  Graph File Settings
* Don't tick (value shown as 0 in Cumulus.ini) if you want local file uploaded with existing content
| sunhours.json &rarr; File Transfer
|-
| 0 (disabled)
|ExtraRealtime0= to ExtraRealtime99=
| Simple tick or not
|Realtime
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[sunhours.json]] file to your local web server (need to select "Generate" too)
|0
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|Simple tick or not
|-
*Tick (value shown as 1 in Cumulus.ini) if
| Ftp-tempdata=0
*# See [[#Realtime Settings]], you must have "Enable realtime" ticked, and defined an interval there
| [FTP site]
*# Uploads the file to destination specified at interval defined
| Release 3.10.0
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
| ^
| Internet Settings &rarr;  Graph File Settings
| tempdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[tempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Ftp-wdirdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| wdirdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-websitedata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Standard File Settings
| websitedata.json &rarr; File Transfer
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
 
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the resulting websitedata.json to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
|ExtraFTP0= to ExtraFTP99=
| Ftp-winddata=0
|FTP
| [FTP site]
|1
| Release 3.10.0
|Simple tick or not
| ^
*Tick (value shown as 1 in Cumulus.ini) if you want MX to use the FTP protocol specified in [[#Web/FTP Site]]
| Internet Settings &rarr;  Graph File Settings
* Don't tick (value shown as 0 in Cumulus.ini) if the remote file is on the computer running MX and a simple Copy File is required
| dailyrain.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-wxnow=0
| [FTP site]
| Release 3.10.0
| ^ (disabled)
| (depends on release)
* (release 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
| wxnow.txt &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
|ExtraUTF0= to ExtraUTF99=
| ForumURL=
|UTF-8
| [Web Site]
|1
| Legacy Cumulus
|Please see [[Reports_folder#Encoding|technical guidance on encoding]]
| (always)  
*Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters
| (depends on release)
*If unticked (0 appears in file), then iso-8859-1 encoding is used
* (releases 3.0.0 to 3.11.4) Internet Settings &rarr; Web Site
|-
* (release 3.12.0 on)   Internet Settings &rarr; Miscellaneous
|ExtraBinary0= to ExtraBinary99=
| Forum URL
|Binary
| (blank)
|0
| Left blank to allow you to choose format
|Simple tick or not
 
*Tick (value shown as 1 in Cumulus.ini) if your file is e.g. an image file (e.g. moon.png)
3.10.0 Default web pages use "<a href=\"https://cumulus.hosiene.co.uk/index.php\">forum</a>"
* Don't tick (value shown as 0 in Cumulus.ini) if the file is text, HTML, PHP script, JSON, JavaScript
|-
|ExtraEOD0= to ExtraEOD99=
|End of Day
|0
|Simple tick or not
*Tick (value shown as 1 in Cumulus.ini) if your file is to be uploaded during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
|}


== Location==
Some alternative URL examples:
 
*https://cumulus.hosiene.co.uk/index.php (for above example in default web pages)
* Introduced for legacy Cumulus
*https://cumulus.hosiene.co.uk
* File Section is [Station]
*https://cumulus.hosiene.co.uk/search.php?search_id=active_topics
 
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
| FTPlogging=0
!style="width:100px" | MX Section
| [FTP site]
!style="width:60px" | Label on Settings page
| Legacy Cumulus
!style="width:20px" | Default
| FTP logging
!style="width:600px" | Description
| Depends on release installed:
|-
# (Releases 3.1.0 to 3.10.5) Internet Settings &rarr;  &rarr; Web Settings &rarr; General Settings
| Altitude=0
# (Releases 3.11.0 to 3.11.4) Program Settings &rarr; Program General Options
| Station Settings &rarr; Location
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Altitude
| (n/a)
| 0
| (n/a)
| The height above mean sea level where the (pressure) sensor is positioned
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX in standard FTP mode add output to [[ftplog.txt]].
to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable updates to '''ftplog.txt'''
For other types of file transfer (STTP, FTPS), any extra diagnostic information appears in latest log in [[MXdiags folder]]
|-
|-
| AltitudeInFeet=1
| FTPRename=1
| Station Settings &rarr; Location
| [FTP site]
| Altitude Units
| Legacy Cumulus
| Default depends on release:
| (always)
# Legacy until 3.11.4: 1 (labelled as feet)
| (depends on release)
# From 3.12.0: 0 (labelled metres)
* (releases 3.0.0 to 3.11.4) Internet Settings &rarr; Web Settings &rarr; General Settings
| Radio Setting
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
* feet  (value shown as 1 in Cumulus.ini)
| FTP rename
* metres (value shown as 0 in Cumulus.ini)
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
The chief advantage of using rename is that it minimises the time that the web server cannot serve a file (while it is being updated)
|-
|-
| LocName=
| Host=
| Station Settings &rarr; Location
| [FTP site]
| Name
| Legacy Cumulus
| (empty)
| (always)
| A short name for the location
| Internet Settings &rarr; Web/FTP Site
| Host name
| (blank)
| This is either the name, or the IP address, of the ftp server to which you connect when you upload pages to your web site.
|-
|-
| LocDesc=
| IncludeMoonImage=1
| Station Settings &rarr; Location
| [FTP site]
| Description
| Release 3.5.0
| (empty)
| (always)
| A longer description for the location
| Internet Settings &rarr; Moon Image
| (FTP) Upload Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer moon image file to your local web server (need to select "Generate Moon Image" see '''MoonImageEnabled=''' too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| "Latitude=0" and "LatTxt="
| IntervalFtpEnabled=1
| Station Settings &rarr; Location &rarr; Latitude
| [FTP site]
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; North or South"
| Release 3.12.0
| (blank)
| ??
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
| Internet Settings &rarr; Interval Settings
| Enable file transfer update interval
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file transfer actions
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected '''LocalCopyEnabled''' (see below)
|-
|-
| "Longitude=0" and "LongTxt="
| ListWebTags=0
| Station Settings &rarr; Location &rarr; Longitude
| [Station]
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; East or West"
| Legacy Cumulus
| (blank)
| Only from Release 3.12.0
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
| Depends on release:
|}
* (3.5.1 to 3.11.4) Manual edit of file
 
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
==Optional Report Settings==
| 0
 
| Simple tick or not
* File Section is [NOAA]
* Tick (value shown as 1 in Cumulus.ini) for MX to create ''WebTags.txt'' file when Cumulus is restarted (contains an unordered list of all the tag names your Cumulus build will recognise and process)
{| class="wikitable" border="1"
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
!style="width:30px" | Parameter Line Entry
| LocalCopyEnabled=0
!style="width:100px" | Introduced
| [FTP site]
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-
| AutoCopy=0
| Release 3.12.0
| Release 3.12.0
| NOAA Reports Settings &rarr; FTP Options
| (always)
| Auto Copy NOAA report files
| Internet Settings &rarr; Interval Configuration
| 0 (disable)
| Enable local copy update interval
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if your report is to be copied to copy directory during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file copy actions
* Don't tick (value shown as 0 in Cumulus.ini) for no copy action
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected file transfer '''IntervalFtpEnabled''' (see previous)
|-
|-
| AutoFTP=0
| LocalCopyFolder=
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; FTP Options
| Release 3.12.0
| Auto transfer NOAA report files
| (always)
| 0 (disable)
| Internet Settings &rarr; Interval Configuration
| Simple tick or not
| (blank)
* Tick (value shown as 1 in Cumulus.ini) to enable the file transfer process you have defined for MX, to upload the file for you (at first update time after rollover has completed)
| Folder (including path) to which MX will copy the standard files (see rows marked ^ for further selections) if 'EnableLocalCopy' is enabled
* Don't tick (value shown as 0 in Cumulus.ini) to disable any file transfer process
|-
|-
| AutoSave=1
| MoonImageEnabled=1
| First with Cumulus 2
| [Graphs]
| NOAA Reports Settings  
| Release 3.5.0
| Create NOAA files after daily rollover
| (always)
|0
| Internet Settings &rarr; Moon Image
| Generate Moon Image
| ^ Default controlled by selection of default web site
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want MX to use the (optional) Reports functionality
* Tick (value shown as 1 in Cumulus.ini) for MX to use System Drawing to modify CumulusMX/web/MoonBaseImage.png and create CumulusMX/web/moon.png
* Don't tick (value shown as 0 in Cumulus.ini) if MX Reports functionality not required
* Don't tick (value shown as 0 in Cumulus.ini) if you don't need MX to create a "moon.png"
|-
|-
| City=
| MoonImageSize=
| First with Cumulus 2
| [Graphs]
| NOAA Reports Settings &rarr; Site Details
| Release 3.5.0
| City
| (always)
| (empty)
| Internet Settings &rarr; Moon Image
| Enter here your hamlet, village, town, or city, name
| Image size
| ???
| Enter a size (in pixels) for the generated moon image (according to space on your web page)
|-
|-
| CoolingThreshold=22
| Password=
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| Legacy Cumulus
| Cooling threshold
| (always)
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
| Internet Settings &rarr; Web/FTP Site
| [[Heat/cold_degree_days_and_Chill_hours#Cold_Degree_Days|Cold Degree Days]] are a measure of the need to cool the air to make it more comfortable,  based on time above, and temperature difference above, a threshold temperature. An international standard says 22 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
| Password
| (blank)
| The password for your FTP/SFTP/FTPS connection (masked out on settings page, shown in plain text in file)
|-
|-
| CopyDirectory=
| Port=21
| Release 3.12.0
| [FTP site]
| NOAA Reports Settings &rarr; Report Options
| Legacy Cumulus
| Copy Directory
| (always)
| (empty)
| Internet Settings &rarr; Web/FTP Site
| The folder on the web server you host to which reports are to be copied
| FTP port
| 21 (plain FTP)
|you normally use either standard FTP (port=21), SSH for FTP i.e. SFTP (port=22), or SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) i.e.FTPS (port=990 normally, may be 25). If you get connection refused, messages in the MXdiags log, then you may need to try alternative protocol and/or alternative ports.
|-
|-
| FTPDirectory=
| RealtimeFTPEnabled=0
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; FTP Options
| Legacy Cumulus
| destination folder
| ^
| (empty)
| Internet Settings &rarr; Realtime Settings
| Where you want MX to use as destination folder on your FTP server
| Enable realtime FTP
*Leave blank and MX will use wherever has been specified in main internet settings (this fits how the default web site is designed to work)
| 0 (disabled)
* Specify a folder relative to FTP root, and MX will upload reports to that folder instead (if you use any files from default web site, then you will need to amend the JavaScript file:
| Simple tick or not
<code>let rptPath = '';  // Your path should have a trailing "/", eg. 'Reports/'</code> by putting your folder name in, an example is given for the case when “/Reports” is a sub folder off the main upload destination, note how you don’t include a leading slash, but you must add a trailing one.
* Tick (value shown as 1 in Cumulus.ini) for MX to be able to do file transfers at real-time interval
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| HeatingThreshold=15.5
|-  
| First with Cumulus 2
| RealtimeGaugesTxtCopy=0
| NOAA Reports Settings &rarr; Thresholds
| [FTP site]
| Heating threshold
| Release 3.12.0
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
| ^
|[[Heat/cold_degree_days_and_Chill_hours#Heat_Degree_Days| Heating Degree Days]] are a measure of the need for heating, based on time below, and temperature difference below, a threshold temperature. An international standard says 15.5 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[SteelSeries_Gauges|realtimegauges.txt]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| MaxTempComp1=22
| RealtimeGaugesTxtCreate=0
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.10.0
| Max temp comparison 1
| ^
| (empty)
| Internet Settings &rarr; Realtime Settings
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the cooling degree day threshold in Celsius. Express in Fahrenheit if that is your chosen unit
| realtimegauges.txt &rarr; Generate
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[SteelSeries_Gauges|realtimegauges.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| MaxTempComp2=0
| RealtimeGaugesTxtFTP=0
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.10.0
| Max temp comparison 2
| ^
| (empty)
| Internet Settings &rarr; Realtime Settings
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
| realtimegauges.txt &rarr; File Transfer
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[SteelSeries_Gauges|realtimegauges.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| MinTempComp1=15.5
| RealtimeInterval=45000
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| Legacy Cumulus
| Min temp comparison 1
| ^
| (empty)
| Internet Settings &rarr; Realtime Settings
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the heating degree day  threshold in Celsius. Express in Fahrenheit if that is your chosen unit
| Realtime interval
| 45000 milliseconds (45 seconds)
| Enter interval time in seconds (decimals allowed), stored in file converted to milliseconds
|-
| RealtimeTxtCopy=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtime.txt
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[realtime.txt]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| MinTempComp2=0
| RealtimeTxtCreate=0
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.10.0
| Min temp comparison 2
| ^
| (empty)
| Internet Settings &rarr; Realtime Settings
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
| realtime.txt &rarr; Generate
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[realtime.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| MonthFileFormat='NOAAMO'MMyy'.txt'
| RealtimeTxtFTP=0
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Output Files
| Release 3.10.0
| Monthly filename format
| ^
| 'NOAAMO'MMyy'.txt' (note quotes round '''NOAAMO''' and round '''.txt''')
| Internet Settings &rarr; Realtime Settings
| Here you specify the filename template for MX to use when reading, or writing, monthly reports
| realtime.txt &rarr; File Transfer
 
| 0
There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension.  e.g. "NOAAMO"MMMyyyy".txt" would also be valid.
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[realtime.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Name=Personal Weather Station
| RecordSetTimeoutHrs=24
| First with Cumulus 2
| [Station]
| NOAA Reports Settings &rarr; Site Details
| Release 3.5.1
| Site Name
| Only from Release 3.12.0
| (empty)
| Depends on release:
| What you would like to see in report title for your station name
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) '''Two places''':
*# Station setings &rarr; General Settings &rarr; Advanced options
*# Station settings &rarr; Common Options &rarr; Advanced options
| Depends on where changed (respectively):
# New record timeout
# Record set timeout
| 24
| Number of hours before the following web tags are reset: TempRecordSet, WindRecordSet, RainRecordSet, HumidityRecordSet, PressureRecordSet, HighTempRecordSet, LowTempRecordSet, HighAppTempRecordSet, LowAppTempRecordSet, HighHeatIndexRecordSet, LowWindChillRecordSet, HighMinTempRecordSet, LowMaxTempRecordSet, HighDewPointRecordSet, LowDewPointRecordSet, HighWindGustRecordSet, HighWindSpeedRecordSet, HighRainRateRecordSet, HighHourlyRainRecordSet, HighDailyRainRecordSet, HighMonthlyRainRecordSet, HighHumidityRecordSet, HighWindrunRecordSet, LowHumidityRecordSet, HighPressureRecordSet, LowPressureRecordSet, LongestDryPeriodRecordSet, LongestWetPeriodRecordSet, HighTempRangeRecordSet, LowTempRangeRecordSet
|-
|-
| NOAAUseUTF8=1
| Sslftp=
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Report Options
| MX beta
| Use UTF-8 encoding
| (always)
| 1 (UTF-8)
| Internet Settings &rarr; Web/FTP Site
| Please see [[Reports_folder#Encoding]]
| Select the FTP Protocol to use
* Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters, including the <sup>o</sup> degree symbol
| 0
* If unticked (0 appears in file), then iso-8859-1 encoding is used, this has a more restricted range of characters, and the <sup>o</sup> degree symbol is coded differently
| Drop down list:
* 0 = FTP (plain old FTP) - default
* 1 = Use SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) for FTP (FTPS)
* 2 = Use Secure Shell Home (SSH) for FTP (SFTP)
|-
|-
| RainComp1=0.5
| SshFtpAuthentication=Password
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.8.2 - build 3092
| Rain comparison 1
| Only if SFTP selected above
| (empty)
| Internet Settings &rarr; Web/FTP Site
| The report will count the number of days when the daily rainfall exceeds this threshold. In the parameter I have quoted, the first comparison has been set to the same as I have set else where as my significant rain threshold
| SFTP Authentication method
| Password
|Drop down list:
* 0 = Password
* 1 = Pre-shared key
* 2 = Password or pre-shared key
|-
|-
| RainComp2=
| SshFtpPskFile=
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| Release 3.8.2 - build 3092
| Rain comparison 2
| only if 1 or 2 selected in previous setting
| (empty)
| Internet Settings &rarr; Web/FTP Site
| The report will count the number of days when the daily rainfall exceeds this threshold.
| Pre-shared Private Key file for SFTP
| (blank)
| Filename for your private PSK file, include the full path if the file is not in same folder as  CumulusMX.exe
|-
|-
| RainComp3=
| UpdateInterval=60
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Thresholds
| legacy software
| Rain comparison 3
| ^
| (empty)
| Internet Settings &rarr; Interval Settings
| The report will count the number of days when the daily rainfall exceeds this threshold.
| Web interval
| 60
| Interval between standard web updates in minutes
|-
|-
| State=
| Username=
| First with Cumulus 2
| [FTP site]
| NOAA Reports Settings &rarr; Site Details
| legacy software
| State
| (always)
| (empty)
| Internet Settings &rarr; Web/FTP Site
| Enter here your local authority area or region (state in USA)
| Username
| (blank)
| the user name for connecting to your server
|-
|-
| UseDotDecimal=0
| UTF8encode=
| Release 3.9.5 - b3100
| [FTP site]
| NOAA Reports Settings &rarr; Report Options
| legacy software
| Use a 'dot' decimal point
| (always)
| 0 (disable)
| (depends on release)
| Formatting real numbers for when NOAA report parsed by a script
* (releases 3.0.0 to 3.11.4) Internet Settings &rarr; Web Settings &rarr; General Settings
 
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
Simple tick or not
| UTF-8 encoding
* Tick (value shown as 1 in Cumulus.ini) if you want NOAA reports to use decimal point even if locale says use decimal comma
| Default depends on release:
* Don't tick (value shown as 0 in Cumulus.ini) if NOAA reports use the integer/decimal separator specified by locale
* (Legacy versions and MX up to 3.9.7) 0 (ISO 8859-1 character set)
|-
* (Release 3.10.0 on) 1 (UTF-8 encoding enabled)
| UseMinMaxAvg=0
| Release 3.12.0
| NOAA Reports Settings &rarr; Report Options
| Use WHO average or Integrated average
| 0 (integrated average)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use WHO approach: (min + max)/2
* Tick (value shown as 1 in Cumulus.ini) for MX to use [[Reports_folder#Encoding|'''UTF-8''' encoding]] in all [[:Category:JSON Files|.json files]]
* Don't tick (value shown as 0 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use integrated calculation: Sum of all temperature measurements divided by count of measurements
* Don't tick (value shown as 0 in Cumulus.ini) and MX will create its .json files using '''ISO 8859-1 character set''', ''please note that this encoding is incompatible with [[New_Default_Web_Site_Information#Installing_the_new_template_for_new_users|web pages]] included in '''webfiles''' folder''; so if you upgrade from an earlier release, you may need to change this setting
|-
|-
| YearFileFormat='NOAAYR'yyyy'.txt’
|WebcamURL=
| First with Cumulus 2
| [Web Site]
| NOAA Reports Settings &rarr; Output Files
| Legacy Software
| Yearly filename format
| (always)
| 'NOAAYR'yyyy'.txt'
| (depends on release)
| Here you specify the filename template for MX to use when reading, or writing, yearly reports
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Site
 
* (release 3.12.0 on)  Internet Settings &rarr; Miscellaneous
There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension.  
| Webcam URL
|-
| (blank)
|12hourformat=0
| Can be used to add a link to any other web page, you have on any web server. In default web pages will be labelled as "web cam", but for your own web pages, this might lead to a home or blog page.
| ???
| NOAA Reports Settings &rarr; Output Files
|Time format
|0 (24 hour)  
| How times are output on reports
* 24 Hour (value shown as 0 in Cumulus.ini)
* 12 Hour (value shown as 1 in Cumulus.ini)
|}
|}


==Program Start-up Options==


* Introduced release 3.9.4 - b3099
* File Section is [Program]
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:160px" | MX Section
!style="width:160px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
|StartupPingHost=
| Program Settings &rarr; Program Start-up Options
|Host to PING on program start-up
|None (no remote host)
| Add a hostname or IP to address to ping at startup. Cumulus waits until the ping is successful before trying to read from your station. Leave blank to disable
|-
|StartupPingEscapeTime=999
| Program Settings &rarr; Program Start-up Options
|PING escape time (mins)
|999 (minutes)
|Specify a time after which if no ping response is received carry on starting Cumulus MX anyway
|-
|StartupDelaySecs=0
| Program Settings &rarr; Program Start-up Options
|Start-up Delay (secs)
|zero (no delay)
|Add a delay before the Cumulus tries to start reading the station.
|-
|StartupDelayMaxUptime=300
| Program Settings &rarr; Program Start-up Options
|Max system uptime to apply the start-up delay
|300 (seconds equivalent to 5 minutes)
|The time that has passed sice MX was started (up-time) is compared against the (max delay time) figure here.
*If max delay time less than up-time, the delay specified in previous parameter will NOT be applied
*If up-time less than this max delay time, then MX will apply any delay specified in previous parameter
*If this parameter is set to zero, then MX will always apply any delay specified in previous parameter
|}


===Normal Mean Temperatures===
==Proxy==
 
 
* File Section is [NOAA]
This is a continuation of an experimental legacy Cumulus software feature, please see [https://cumulus.hosiene.co.uk/viewtopic.php?f=4&t=728 here for request] and see [[Cumulus.ini_(Cumulus_1)#Proxies|here]] for potential content.  I have not seen any evidence that this feature ever came out of beta, and nobody has ever commented on its use, so I see no reason to do any further documentation.
* The parameters run from ‘’’NOAATempNormJan=’’’ to ‘’’NOAATempNormDec=’’
 
* There is one box labelled for each month on the settings screens
==Station specific alternatives==
* All the defaults are (blank)
* What you enter is the mean temperature, long-term averages (say over 10 or 30 years if available) say is expected that month, often taken from local climate statistics, or your own past measurements
 
===Normal Precipitation===


* File Section is [NOAA]
A number of settings are shown only for specific station types, and so the following tables are grouped here.
Rainfall equivalents of mean temperature described above


==Optional Third-party Upload Settings==
Since MX is being developed by someone who uses a Davis station, a lot of "Labels on the Settings Screens" mention "Davis" even if you have selected a different station, because the code was written by copy and paste!


=== Solar===


Cumulus MX is unable to work out if you have a solar sensor, so these options are always displayed.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:30px" | File Section
!style="width:100px" | File Section
!style="width:60px" | MX Section
!style="width:100px" | Introduced
!style="width:80px" | Action on Settings page
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:800px" | Description
|-
|-
| <pre>ID=
| SolarCalc=0
pass=-1
| [Solar]
server=cwop.aprs.net
| 3.13
port=14580
| Station Settings &rarr; Solar
Enabled=0
| Solar Calculation Method
Interval=9
|  0=Ryan-Stololzenbach
SendSR=0
| Drop-down list:
APRSHumidityCutoff=0</pre>
*  0=Ryan-Stololzenbach
| [APRS]
* 1=Bras
| APRS/CWOP
|-
| Tick "Enabled" to see list of parameters so you can edit them
| SunThreshold=75
| Defaults are as shown in list of parameters
| [Solar]
| 3.13
| Station Settings &rarr; Solar
| Sun Threshold (percent)
| 75
| Enter a number
|-
|-
| <pre>User=
| SolarMinimum=0
Password=
| [Solar]
Language=en
| 3.13
Enabled=0
| Station Settings &rarr; Solar
Interval=900
| Solar minimum (W/m2)
SendUV=0
| 30
SendSR=0
| Enter a number
SendSoilTemp=0
SendIndoor=0
SendSoilMoisture=0
SendLeafWetness=0
SendAirQuality=0</pre>
| [Awekas]
| AWEKAS
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>Enabled=0
| RStransfactorJul=0.80000000000000004
CatchUp=1
| [Solar]
APIkey=
| 3.14
StationId=
| Station Settings &rarr; Solar
Interval=15</pre>
| RS Transmission factor (June)
| [OpenWeatherMap]
 
| OpenWeatherMap
(Note the internal calculation does apply this to June, but some MX releases were incorrectly typed to say "July" on the settings screen).
| Tick "Enabled" to see list of parameters so you can edit them
| 0.8
| Defaults are as shown in list of parameters
| MX does a sinusoidal interpolation between this value and the next. So this June factor changes very little either side of that solstice, with the average value from both factors applying at the equinoxes (March and September) and different amounts of each factor each side of equinox.  (So actually more like a cosine interpolation!)
|-
|-
| <pre>ID=
| RStransfactorDec=0.80000000000000004
Password=
| [Solar]
Enabled=0
| 3.14
Interval=15
| Station Settings &rarr; Solar
SendUV=0
| RS Transmission factor (December)
SendSR=0
| 0.8
CatchUp=1</pre>
| MX does a sinusoidal interpolation between last value and this one. So this December factor changes very little either side of that solstice,  with the average value from both factors applying at the equinoxes (March and September) and different amounts of each factor each side of equinox.  (So actually more like a cosine interpolation!)
| [PWSweather]
| PWS Weather
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>User=
| UseBlakeLarsen=0
Password=
| [Solar]
Enabled=0
| Legacy
Interval=60
| Extra Sensor Settings
OauthToken=unknown
| Blake-Larsen Sunshine Recorder
OauthTokenSecret=unknown
| 0=deselected
TwitterSendLocation=1</pre>
| checkbox
| [Twitter]
|}
| Twitter
 
| Please note that twitter is deprecated, no new settings possible, existing settings can be used by people who migrated from Cumulus 1 with working tokens
===Selecting the weather station type determines which options are shown===
| Defaults are as shown in list of parameters
 
{| class="wikitable" border="1"
|-
|-
| <pre>Wid=
!style="width:30px" | Parameter Line Entry
Key=
!style="width:100px" | File Section
Enabled=0
!style="width:100px" | Introduced
Interval=10
!style="width:100px" | MX Section
SendUV=0
!style="width:60px" | Label on Settings page
SendSR=0
!style="width:20px" | Default
SendAQI=0
!style="width:800px" | Description
SendSoilMoisture=0
SoilMoistureSensor=0
SendLeafWetness=0
LeafWetnessSensor=0</pre>
| [WeatherCloud]
| WeatherCloud
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>Enabled=0
|Type= -1  
StationUID=
| [Station]
Password=
| 0 (all releases), 1 (Early legacy releases), 2 and 3 (from version 1.7.0), 4 (from version 1.7.12), 5 (from version 1.8.0), 6 (from version 1.8.3), 7 (from version 1.9.1), 8 to 10 (from release 1.9.2), 11 (from a MX beta build), and 12 (from release 3.2.0)
Interval=1
| Station Settings &rarr; General Settings
SendRain=0</pre>
| Station type
| [WindGuru]
| -1 (not yet defined)
| Windguru
| Drop-down
| Tick "Enabled" to see list of parameters so you can edit them
* -1 = "Select Station", shown before a selection from those below is made
| Defaults are as shown in list of parameters
* 0 = Davis Vantage Pro station
|-
* 1 = Davis Vantage Pro2 or Vue station
| <pre>APIkey=
* 2 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) which have a serial port connection and have wireless connection (e.g. WMR-928 station)
StationIdx=0
* 3 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) which have a serial port connection and have wired connection (e.g. WM-918 station)
Enabled=0
* 4 = Reading from file [[EasyWeather_Format#Usage_of_easyweather.dat_fields_for_Cumulus_input_of_latest_record: |EasyWeather.dat]] (using EasyWeather software version 6.2, or earlier, running continuously with Cumulus). Fine Offset weather stations that record Solar and UV measurements output to [[EasyWeather_Format#EasyWeatherPlus.dat| EasyWeatherPlus.dat file]] when Easyweather software version 6.x is running. This has the same fields as easyweather.dat, plus two extra fields for Solar and UV data at the end, and so Cumulus can understand the fields you must also have '''LogExtraSensors=1''' set.
Interval=15
'''NOTE:''' You can also use ''Type=4'' if you want to run Cumulus with reduced functionality without a weather station attached, to view historical observations. A full set of (historic) files in the ''data'' subfolder copied from a system with a weather station attached is needed, but in this case, the [[#Introduced for problems with Fine Offset family:| EWFile= ]] attribute should be at its default of not having any filename value.  
SendUV=0
* 5 = Fine Offset, Maplin, Chas Olsen, MyDEL, Nevada, Watson, Tycon Power, Aercus, etc as defined in [[Supported_Devices#Fine_Offset|Fine Offset section in Supported_Devices article]] ('''without''' solar measurement sensors (with or without solar recharging))
CatchUp=1</pre>
* 6 = For all La Crosse WS23xx models e.g. WS2300
| [Windy]
* 7 = Fine Offset/Watson/MyDel etc '''with Solar Sensors''' as defined in [[Supported_Devices#Fine_Offset_with_UV/Light sensor|Fine Offset with UV/Light sensor in Supported_Devices article]].
| Windy.com
* 8 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) using [[WMR100-200_Protocol]] e.g. WMR100
| Tick "Enabled" to see list of parameters so you can edit them
* 9 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) using [[WMR100-200_Protocol]] e.g. WMR200
| Defaults are as shown in list of parameters
* 10 = Instromet (with optional extra solar sensors or without)
* 11 = Davis WLL
* 12 = Ecowitt GW1000 and Froggit DP1500 (and any equivalents)
 
'''Selection made here determines what MX sections appear on the Station Settings page
|-
|-
| <pre>ID=
| Model=
Password=
| [Station]
Enabled=0
| Early legacy version
Interval=15
| Station Settings &rarr; General Settings
SendUV=0
| Station model
SendSR=0
| (empty) 
CatchUp=1</pre>
|The weather station model description that you want output by the web tag &lt;#stationtype>
| [WOW]
|}
| Met Office WOW
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|}


==Optional Web Server==
===Airlink===


The settings listed here changed dramatically at both 3.10.0 and 3.12.0 releases, but they have gradually evolved throughout the development of MX.
The details in this sub-section need to be checked by someone who uses the relevant hardware.


FRom 3.12.0, MX can optionally either copy files to a web server you host or file transfer files to a commercial web server.
* Introduced Release
 
* File Section is [AirLink]
To implement (and customise) this web server functionality, there are many settings as listed alphabetically in this table. The Internet settings page simplifies making settings by providing selections that amend multiple settings in a bulk operation:
* Not Shown on Settings page?
* Some settings (marked ^ in table) are only displayed if you select '''I want to use the supplied default web site'''.  
IsWllNode=0
** For these settings, the "Generate" option is enabled in nearly all (see any qualifier) settings
WLv2ApiKey=
** If you select "Enable file copy of standard files" (default is disabled) then those settings have their "Copy" option enabled in nearly all (see any qualifier) cases, and their "FTP Transfer" option deselected (instead of defaults shown in table)
WLv2ApiSecret=
** If you deselect "Enable file transfer of standard files" (default is enabled) then those settings have their "Copy" option disabled, and their "FTP Transfer" option enabled in nearly all (see any qualifier) cases (as per defaults shown in table)
AutoUpdateIpAddress=1
* '''The default selections assume you have air quality, and solar, sensors; so you may need to disable some of the defaults the above selections have made'''
In-Enabled=0
* If you don't select '''I want to use the supplied default web site''', then all the settings marked ^ are disabled
In-IPAddress=0.0.0.0
** This is what you want if you do not use the MX optional web server functionality
In-WLStationId=-1
** If you have a customised  web site, you may want to select '''I want to use the supplied default web site'''  to see the settings that would otherwise all be disabled, and then pick any options that would be useful to you.
In-Hostname=
Out-Enabled=0
Out-IPAddress=0.0.0.0
Out-WLStationId=-1
Out-Hostname=
AQIformula=0
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:100px" | File Section
!style="width:100px" | Introduced
!style="width:100px" | Shown on Settings page?
!style="width:100px" | Shown on Settings page?
!style="width:100px" | MX Section
!style="width:100px" | MX Section
Line 2,772: Line 2,678:
!style="width:600px" | Description
!style="width:600px" | Description
|-
|-
| ActiveFTP=0
|
| [FTP site]
|}
| Legacy Cumulus
 
| No
===Davis===
| Change directly in file as at release 3.11.x
 
| (n/a )
Two Wiki sub-sections, that need to be checked by by somebody who uses the relevant functionality:
| (n/a)
 
| *0 = Disabled (default)
 
*1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
====Davis VP/VP2/Vue====
 
 
{{Template:WorkInProgressBanner}} This table does not yet have all details in it.
* Introduced for legacy Cumulus
* File Section is [Station]
* Only "Shown on Settings page" if either "Type=0" or "Type=1"
{| class="wikitable" border="1"
|-
|-
| Copy-airquality=0
!style="width:30px" | Parameter Line Entry
| [FTP site]
!style="width:60px" | Label on Settings page
| Release 3.12.0
!style="width:120px" | Default
| ^
!style="width:800px" | Description
| Internet Settings &rarr;  Graph File Settings
| airquality.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the airquality.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
|-  
|-  
| Copy-alldailydegdaydata=0
|style="background:lightgray;"|[Station]  
| [FTP site]
|
| Release 3.12.0
|
| ^
|style="background:lightgray;"|Section name - the following parameters appear in Station section
| Internet Settings &rarr; Graph File Settings
|-
| alldailydegdaydata.json &rarr; Copy
|VP2SleepInterval=500
| 0 (disabled)
|
| Simple tick or not
|500 (milli-seconds)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailydegdaydata.json]] file to your local web server (need to select "Generate" too)
|the period which Cumulus waits between reads of the data from Davis stations, the value is in milliseconds.
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* if you suspect that data is being missed, reduce number
|-  
*For VirtualVP users, tests revealed that VP2SleepInterval = 1100 seems to work the best. It updates every two seconds with few exceptions.  
| Copy-alldailyhumdata=0
|-
| [FTP site]
|VPClosedownTime=x
| Release 3.12.0
|
| ^
|(default not yet documented)
| Internet Settings &rarr;  Graph File Settings
| x is the number of seconds after the start of the re-connect attempts that you want the program to close itself
| alldailyhumdata.json &rarr; Copy
|-
| 0 (disabled)
|DavisCalcAltPress=1
| Simple tick or not
|
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
|1
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|Davis stations calculate Sea Level Pressure (SLP) from Station Pressure (SP) using a formula based on temperature, humidity, and altitude
|-
 
| Copy-alldailypressdata=0
CWOP require 'Altimeter Pressure' (AP) to be uploaded, i.e. a value calculated simply using altitude.  
| [FTP site]
*0 = Use SLP supplied by Davis
| Release 3.12.0
*1 = Convert the SP Davis supplies to AP using the altitude you have supplied.
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailypressdata.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Copy-alldailyraindata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailyraindata.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailysolardata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailysolardata.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
|-
| Copy-alldailytempdata=0
|SyncDavisClock=0
| [FTP site]
|
| Release 3.12.0
|0  
| ^
|When set, at Cumulus start-up and at a fixed time (default 04:00, see next parameter) each day, Cumulus will set the Davis VP/VP2 clock to within a minute of the same time as the PC. (From build 3015 for MX).
| Internet Settings &rarr;  Graph File Settings
*0 = Disabled, default (as deselected on the Station Configuration Screen)
| alldailytempdata.json &rarr; Copy
*1 = Enabled, ensures that when Cumulus asks the station for data since time X, both recognise X!
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Copy-alldailywinddata=0
|ClockSettingHour=4
| [FTP site]
|
| Release 3.12.0
|4
| ^
|Controls what hour of the day the SyncDavisClock activity will take place if it is enabled.
| Internet Settings &rarr;  Graph File Settings
*4 = 04:00 (default value)
| alldailywinddata.json &rarr; Copy
*0-23 = 00:00 to 23:00
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Copy-alltempsumdata=0
|VP2ConnectionType=1
| [FTP site]
|
| Release 3.12.0
|  
| ^
|Weather station connection type
| Internet Settings &rarr;  Graph File Settings
*0 = serial (see next parameter to specify COM port)
| alldailytempsumdata.json &rarr; Copy
*(1 = usb - setting no longer available on screen, remains as default in cumulus.ini for those not using a Davis)
| 0 (disabled)
*2 = TCP/IP (see later parameters to specify ports)
| Simple tick or not
Default is type 1, i.e. neither option on screen selected, so if you use a Davis you must select either serial or TCP/IP.
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempsumdata.json]] file to your local web server (need to select "Generate" too)
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|VP2TCPPort=22222
|
| 2222
|Communications port used if VP type has TCP/IP selected.
|-
|-
| Copy-availabledata=0
|VP2IPAddr=0.0.0.0  
| [FTP site]
|
| Release 3.12.0
| 0.0.0.0
| ^ (once only)
|Weather station IP address if VP type has TCP/IP selected.
| Internet Settings &rarr;  Graph File Settings
| availabledata.json  &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Copy-dailyrain=0
|VP2PeriodicDisconnectInterval=0
| [FTP site]
|
| Release 3.12.0
|0 (disable)
| ^
|When the clock minute changes, Cumulus stops the current stream of data from the console, disconnects, waits for the specified number of milliseconds, to allow the Weatherlink IP to briefly connect to the Davis Weatherlink site. Cumulus then attempts to reconnect.
| Internet Settings &rarr;  Graph File Settings
 
| dailyrain.json &rarr; Copy
Set it to zero to disable, if you are not using the Weatherlink site.
| 0 (disabled)
|-
| Simple tick or not
|LogExtraSensors=0
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
|
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|0
|-  
|This is set in the '''Settings''' block on the Station settings screen off the configuration menu. Set this to 1 if you have additional sensors (e.g. a Davis Leaf Wetness probe) to make Cumulus read, display, and log the readings from the sensors. You don't select this for Solar/UV sensors.
| Copy-dailytemp=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr;  Graph File Settings
| dailytemp.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailytemp.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-graphconfig=0
| [FTP site]
| Release 3.12.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| graphconfig.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Copy-humdata=0
|UseDavisLoop2=1
| [FTP site]
|
| Release 3.12.0
|1 (use Loop2)
| ^
|The current MX code uses ''LOOP2'' for two purposes. First, it uses the 'peak 10-minute gust' value, to avoid the problem where a gust might be missed, and secondly it uses the 'absolute pressure' value to make calculation of 'altimeter pressure' easier and more accurate. This is mainly used if you upload to CWOP.
| Internet Settings &rarr; Graph File Settings
*1 (default) = Cumulus MX will use the LOOP2 packet for Davis Weather Stations by default. The LOOP2 packet is supported on the VP2 with firmware version 1.90 or later, and on the Vue.
| humdata.json &rarr; Copy
*0 = Select this if you have a Vantage Pro (i.e. the original 'VP1'), or a VP2 with pre-1.90 firmware, or if you are using Virtual VP, none of these support the LOOP2 packet.
| 0 (disabled)
 
| Simple tick or not
Without this setting, Cumulus will revert to calculating the 10-minute gust value itself from the individual wind speed readings, but it will not currently attempt to calculate altimeter pressure correctly, it will simply use the sea-level pressure instead. This is likely to be an issue if you are at high altitude and you upload to CWOP using Cumulus MX.
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[humdata.json]] file to your local web server (need to select "Generate" too)
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|DavisIPResponseTime=500
|-  
|
| Copy-pressdata=0
|500
| [FTP site]
|The length of time in milliseconds which Cumulus waits to allow a response from the console to a command (i.e. a request for any kind of data) from an IP logger, see Cumulus MX forum where times up to 2000ms are suggested.
| Release 3.12.0
|-
| ^
|ForceVPBarUpdate=0
| Internet Settings &rarr;  Graph File Settings
|
| pressdata.json &rarr; Copy
|0 (normal)
| 0 (disabled)
| Added in build 3042 (January 2017).
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[pressdata.json]] file to your local web server (need to select "Generate" too)
The default (value=0) is to assume standard barometer updates on Davis stations. Set to 1, by adding ForceVPBarUpdate=1 in [Station] section to force more frequent barometer updates on Davis stations. Steve says "Having checked the code, I see it asks for 20 packets from the 'LOOP2' if the barometer forcing is on, otherwise it stops receiving LOOP data after 50 packets". Note that ForceVPBarUpdate=1 is only useful on very old versions of the console firmware.
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
|DavisIncrementPressureDP=0
| Copy-raindata=0
|
| [FTP site]
|1
| Release 3.12.0
|(from version 3.0.0 build 3042)
| ^
* 0= Pressure values shown to 1 decimal places when reported in mb/hPa, shown to 2 decimal places for inHg
| Internet Settings &rarr;  Graph File Settings
* 1= Pressure values shown to 2 decimal places when reported in mb/hPa, shown to 3 decimal places for inHg
| raindata.json &rarr; Copy
|-
| 0 (disabled)
|VPrainGaugeType=0
| Simple tick or not
|
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[raindata.json]] file to your local web server (need to select "Generate" too)
|1
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|Specifies the units selected on your Vantage Pro Rain Gauge.
|-  
*0 = Metric Rain Adapter fitted, a 0.2mm gauge
| Copy-solardata=0
*1 = Imperial gauge without adapter, a 0.01" gauge.
| [FTP site]
Note that if the units you choose for rainfall do not match your rain gauge type, conversion rounding errors will then occur.
| Release 3.12.0
|-
| ^
|DataLogging=0
| Internet Settings &rarr;  Graph File Settings
|
| solardata.json &rarr; Copy
|0
| 0 (disabled)
|(Build 3018 onwards).
| Simple tick or not
*0 (default) = Cumulus MX will not add extra logging.
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[solardata.json]] file to your local web server (need to select "Generate" too)
*1 = To add extra logging to the diags file for data received from Davis stations. Use this with care, the log will get very large.  
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
I've also added some more diagnostics to try to find the cause of the problem where data stops being read from Davis stations. Debug logging is required to be turned on. (Build 3022 onwards).
|-  
|-
| Copy-sunhours=0
|AutoUpdateIpAddress=1
| [FTP site]
|
| Release 3.12.0
|1
| ^
|default = 1, set to 0 to switch off the WLL autodetection of IP address. This is a workaround for a WLL firmware bug that does not update the IP address when it changes using DHCP.
| Internet Settings &rarr;  Graph File Settings
|-
| sunhours.json &rarr; Copy
|ZeroConfig
| 0 (disabled)
|
| Simple tick or not
|(default not known)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[sunhours.json]] file to your local web server (need to select "Generate" too)
|set this on station settings screen; to enable/disable the entry/update of the stations IP address via auto-discovery
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
|}
 
====Davis WeatherLink Live====
 
{{Template:WorkInProgressBanner}} This table has not been populated yet
* Introduced in a MX beta build
* File Section is [WLL]
* Only "Shown on Settings page" if "Type=11"
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-  
|-  
| Copy-tempdata=0
|style="background:lightgray;"|[Station]
| [FTP site]
|
| Release 3.12.0
|  
| ^
|style="background:lightgray;"|Section name - the following parameters appear in Station section
| Internet Settings &rarr; Graph File Settings
|-
| tempdata.json &rarr; Copy
|
| 0 (disabled)
|
| Simple tick or not
|
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[tempdata.json]] file to your local web server (need to select "Generate" too)
|  
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|}
 
===EasyWeather (Reading File instead of connecting to a Weather Station)===
 
This sub-section is based on what applied for the legacy software, assuming nothing has changed for MX.
 
* Introduced in a Legacy version
* File Section is [Station]
* MX Section is "EasyWeather File Settings"
* Only "Shown on Settings page" if "Type=4"
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:60px" | Label on Settings page
!style="width:120px" | Default
!style="width:800px" | Description
|-  
|-  
| Copy-wdirdata=0
| EWInterval=10
| [FTP site]
| File Read Interval
| Release 3.12.0
| 10 (minutes between new line becoming available in file)
| ^
| Cumulus needs to know how often to read a new record from the easyweather.dat file. Enter any number in box.
| Internet Settings &rarr;  Graph File Settings
*0= Default, meaning not applicable
| wdirdata.json &rarr; Copy
*n= any positive decimal value representing Easyweather version 6.2, or earlier, logging interval in minutes  (used for reading single latest observations from [[EasyWeather_Format#Usage_of_easyweather.dat_fields_for_Cumulus_input_of_latest_record: |Easyweather]] software output). Note to specify seconds, use decimal minutes, e.g. 30 seconds = 0.5
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Copy-websitedata=0
| EWFile=  
| [FTP site]
| Filename
| Release 3.12.0
| (empty)
| ^
| * Full file path/name for [[EasyWeather_Format#Usage_of_easyweather.dat_fields_for_Cumulus_input_of_latest_record: |Easyweather.dat or EasyWeatherPlus.dat]]
| Internet Settings &rarr; Standard File Settings
* (empty) (i.e. attribute and equals sign, but no value) '''Note:''' If you want to run Cumulus without an attached weather station (because your station has a fault or because you have a second PC), it is possible to run Cumulus with station '''Type=4''' but with the default of no file specified in this parameter. The full Cumulus directory structure and its files including those in the ''data'' sub-directory are needed (kept from when your station was working or copied from the PC with the station). Although only the old observations can be accessed, (no new ones are being added), this does allow analysis of the old observations via all Cumulus features
| websitedata.json &rarr; Copy
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]


Simple tick or not
See [[FAQ#Cumulus_isn.27t_performing_periodic_tasks.2C_like_data_logging_or_web_uploads|FAQ here]] for reduced functionality using Cumulus 1 in this way.
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the resulting websitedata.json to your local web server
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| EWminpressureMB=900
|-
| Minimum Pressure Value
| Copy-winddata=0
| 900
| [FTP site]
| Cumulus will ignore all pressure readings from the station that are less than this value (units are always hPa/millibars)
| Release 3.12.0
|-
| ^
| EWmaxpressureMB=1200
| Internet Settings &rarr;  Graph File Settings
| Maximum Pressure Value
| winddata.json &rarr; Copy
| 1200
| 0 (disabled)
| Cumulus will ignore all pressure readings from the station that are greater than this value (units are always hPa/millibars)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[winddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Copy-wxnow=0
| [FTP site]
| Release 3.12.0
| ^ (disabled)
| Internet Settings &rarr; Standard File Settings
| wxnow.txt &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| CopyMoonImage=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Moon Image
| Copy Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy moon image file to your local web server (need to select "Generate Moon Image" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Create-airquality=0
| EWMaxRainTipDiff=40
| [FTP site]
| Rain Tip Difference
| Release 3.10.0
| Default=30 tips in Cumulus 1, MX default is 40 tips
| ^
| This configurable threshold is the maximum feasible amount of rain between updates (i.e. within 48-seconds on Fine Offset stations without solar, 60 seconds on those measuring solar), set in units of count of tips.
| Internet Settings &rarr;  Graph File Settings
 
| airquality.json &rarr; Generate
For standard Fine Offset rain gauges, each tip represents 0.3mm, so 30 tips are equivalent to 9 mm, or just over a third of an inch in 48 seconds.
| 1 (enabled)
 
| Simple tick or not
This setting affects rain rate, rain last hour, rain so far today (and what is recorded in today.ini/dayfile.txt), but does not affect the web tag <#r24hour>.
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the airquality.json file
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| EWpressureoffset=x.y
|-  
| Pressure Offset
| Create-alldailydegdaydata=0
| 9999
| [FTP site]
| The pressure that Cumulus MX processes is equal to what read in the file plus the value set for this parameter. Normally used to convert the station pressure to the equivalent Sea Level Pressure.
| Release 3.10.0
|}
| ^
 
| Internet Settings &rarr;  Graph File Settings
===Ecowitt GW1000 and Froggit DP1500 (and any equivalents) specific===
| alldailydegdaydata.json &rarr; Generate
 
| 1 (enabled)
{{Template:WorkInProgressBanner}} An Ecowitt user needs to check/update this sub-section, it is understood significant changes are included in 3.12.0 beta builds, but the forum does not give away any details
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailydegdaydata.json]] file  
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alldailyhumdata=0


| [FTP site]
* Introduced in release 3.2.0
| Release 3.10.0
* File Section is [GW100]
| ^
* MX Section is "Ecowitt GW1000 Settings"
| Internet Settings &rarr;  Graph File Settings
* Only "Shown on Settings page" if "Type=12"
| alldailyhumdata.json &rarr; Generate
{| class="wikitable" border="1"
| 1 (enabled)
|-
| Simple tick or not
!style="width:30px" | Parameter Line Entry
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyhumdata.json]] file
!style="width:100px" | Label on Settings page
* Don't tick (value shown as 0 in Cumulus.ini) to disable
!style="width:20px" | Default
|-  
!style="width:600px" | Description
| Create-alldailypressdata=0
|-
| [FTP site]
|AutoUpdateIpAddress=1
| Release 3.10.0
|Auto-discovery
| ^
|1 (selected)
| Internet Settings &rarr; Graph File Settings
|Should MX attempt to discover IP address
| alldailypressdata.json &rarr; Generate
*0=Disable
| 1 (enabled)
*1=Enable
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailypressdata.json]] file
|IPAddress=
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|IP address
|-  
|(no default)
| Create-alldailyraindata=0
| stores the IP address of your GW1000 WiFi logger
| [FTP site]
|-
| Release 3.10.0
|MACAddress=
| ^
|MAC addresss
| Internet Settings &rarr; Graph File Settings
|(no default)
| alldailyraindata.json &rarr; Generate
|Populated by MX when auto-discovery enabled
| 1 (enabled)
|}
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyraindata.json]] file
 
* Don't tick (value shown as 0 in Cumulus.ini) to disable
===Fine Offset Stations===
 
* Introduced in a Legacy version
* File Section is [Station]
* MX Section is "Fine Offset Settings"
* Only "Shown on Settings page" if either "Type=5" or "Type=7"
 
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Introduced
!style="width:100px" | Shown on Settings page?
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-
| FOReadAvoidPeriod=3
| MX release ??
| Only if Fine Offset selected
| Station Settings &rarr; Fine Offset Advanced Settings
| Read Avoid Period
| 3 (seconds)
| If previous setting enabled, MX will avoid reading the circular memory from the number of seconds specified before it expects Fine Offset to be writing to the circular memory, to the number of seconds specified after it expects Fine Offset to be writing to the circular memory
 
(One issue is that Fine Offset will move from one position to the next position in the circular memory, at the Fine Offset Logging Interval, but will delay this move by up to one minute, if the existing memory position is actually being updated by a read from the sensors and normally those updates happen every 40 seconds for non-solar sensors, and every 60 seconds for solar sensor)
|-
| ??
| MX release ??
| Only if Fine Offset selected
| Station Settings &rarr; Fine Offset Advanced Settings
| Set the Fine Offset Logger interval to match Cumulus MX interval
| 0 (disabled)
| Simple tick or not - labelled as "Experimental - use with caution"
* Tick (value shown as 1 in Cumulus.ini) for MX to attempt to "update the Davis interval" (I said copy and paste was used from Davis section!) to match the interval MX is using.  
* Don't tick (value shown as 0 in Cumulus.ini) for no effect on your weather station
|-
| FineOffsetReadTime=150
| MX release ??
| Only if Fine Offset selected
| Station Settings &rarr; Fine Offset Advanced Settings
| Request/Read Delay
| 150 (milliseconds)
| Adjust time (in milliseconds) between request for read, and actual attempt to read data via USB
|-
| ProductID=-1
| MX release ??
| Only if Fine Offset selected
| Station Settings &rarr; Fine Offset Advanced Settings
| USB Product Id (PID)
| -1 (default setting)
| Advanced setting if you don't want to leave it to MX to find your HID
|-  
|-  
| Create-alldailysolardata=0
| SyncFOReads=0
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| Only if Fine Offset selected
| ^
| Station Settings &rarr; Fine Offset Settings
| Internet Settings &rarr; Graph File Settings
| Synchronise Reads
| alldailysolardata.json &rarr; Generate
| 0 (disabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailysolarydata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to attempt to work out when your Fine Offset is writing data to the console log, so that MX does not read the Fine Offset circular memory when it is being updated
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) for MX to read the Fine Offset circular memory whenever it next wants data
 
# The parameter was added for legacy releases, to try to reduce the occurrence of "lock-up" issues.
# MX uses a different way to interrogate Fine Offset stations, originally ticking this could result in more reads being skipped, than actually processed, potentially updating just a few times a day, so it was best disabled!
# The MX code relating to this parameter was rewritten 1n 3.11.0, but the developer labels this as an "attempt", so it may still be best to try to manage without enabling this setting
|-
| VendorID=-1
| MX release ??
| Only if Fine Offset selected
| Station Settings &rarr; Fine Offset Advanced Settings
| USB Vendor Id (PID)
| -1 (default setting)
| Advanced setting if you don't want to leave it to MX to find your HID
|}
 
===Instromet Settings===
 
 
{{Template:WorkInProgressBanner}} The following table has some gaps to fill in, needs a contributor who uses this type of weather station
 
* Introduced in a Legacy version
* File Section is [Station]
* MX Section is "Instromet Settings" or "Instromet Advanced Options" as indicated
* Only "Shown on Settings page" if either "Type=5" or "Type=7"
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:300px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-  
|-  
| Create-alldailytempdata=0
| ComportName=xxxxxx
| [FTP site]
| Station Settings &rarr; Instromet Settings
| Release 3.10.0
| Serial port name
| ^
| /dev/ttyUSB0 (on Linux), COM1 (on Microsoft Windows)
| Internet Settings &rarr; Graph File Settings
| Only required if your station is connected via a real, or virtual, serial port
| alldailytempdata.json &rarr; Generate
|-
|ImetBaudRate=19200
| Station Settings &rarr; Instromet Settings
| Serial Baud Rate (DavisBaudRate)
| 19200
| Some ?older? Instromet loggers operate at 115200, if you have one of these older loggers you will need to reset this value
|-
| "SyncDavisClock=0" and "ClockSettingHour=4"
| Station Settings &rarr; Instromet Advanced Options
| "Sychronise Station Clock" and "Clock sync hour"
| Tick box not selected, data box set to 4
| Note despite the name of the parameter within 'Cumulus.ini', this does apply to Instromet stations.
 
*Simple tick or not
** Tick (value shown as 1 in Cumulus.ini) for MX to attempt to sychronise the Instromet Station Clock with your computer time. This ensures that when Cumulus asks the station for data since time X, both recognise X as representing same time!
** Don't tick (value shown as 0 in Cumulus.ini) if you don't want MX to attempt to keep station clock in line with computer clock
* Box taking an integer
** The hour of the day when,  if enabled, Cumulus will set the Instromet clock to within a minute of the same time as the computer. This will happen at a default time of 04:00 each day, (4 a.m.) unless the setting box is edited
|-
| ImetUpdateLogPointer=1
| Station Settings &rarr; Instromet Advanced Options
| Update logger pointer
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to update the memory pointer to the last record after every 30 data reads
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick to disable this action
|-
|-
| Create-alldailywinddata=0
|ImetWaitTime=500
| [FTP site]
| Station Settings &rarr; Instromet Advanced Options
| Release 3.10.0
| Delay between sending data read commands
| ^
| 500
| Internet Settings &rarr;  Graph File Settings
| Specifies the time in milliseconds that Cumulus waits after one read, before it does the next read from an Instromet station. According to the specification, 500 ms is the absolute maximum time that the station should take to respond to any commandFor Cumulus 1, the default was 200 milli-seconds, so you might try that too.
| alldailywinddata.json &rarr; Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailywinddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Create-alltempsumdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Graph File Settings
| alldailytempsumdata.json &rarr; Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempsumdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-availabledata=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| availabledata.json &rarr; Generate
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[availabledata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Create-dailyrain=0
| ImetReadDelay=500
| [FTP site]
| Station Settings &rarr; Instromet Advanced Options
| Release 3.10.0
| Delay after sending a command before trying to read data from the serial port
| ^
| 500
| Internet Settings &rarr; Graph File Settings
| Specifies the time in milliseconds that Cumulus allows after sending a command before it tries to read data on the serial port. According to the specification, 500 ms is the absolute maximum time that the station should take to respond to any command. For Cumulus 1, the default was 200 milli-seconds, so you might try that too.  
| dailyrain.json &rarr; File Transfer
|}
| 1 (enabled)
 
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailyrain.json]] file
===LaCrosse stations===
* Don't tick (value shown as 0 in Cumulus.ini) to disable
 
|-
 
| Create-dailytemp=0
 
| [FTP site]
{{Template:WorkInProgressBanner}} The following table has some gaps to fill in, needs a contributor who uses this type of weather station
| Release 3.10.0
 
| ^
 
| Internet Settings &rarr;  Graph File Settings
{| class="wikitable" border="1"
| dailytemp.json &rarr; File Transfer
|-
| 1 (enabled)
!style="width:30px" | Parameter Line Entry
| Simple tick or not
!style="width:100px" | Shown on Settings page?
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
!style="width:100px" | File Section
* Don't tick (value shown as 0 in Cumulus.ini) to disable
!style="width:150px" | Introduced
|-  
!style="width:100px" | MX Section
| Create-graphconfig=0
!style="width:60px" | Label on Settings page (mostly in '''Alarm''' column)
| [FTP site]
!style="width:20px" | Default
| Release 3.10.0
!style="width:300px" | Description
| ^ (once only)
|-
| Internet Settings &rarr; Graph File Settings
| LCMaxWind=X
| graphconfig.json &rarr; Generate
| Shown only if La Crosse was selected as station type
| 1 (enabled)
| [Station]
| Simple tick or not
| 3.12.0
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[graphconfig.json]] file
| Depends on release:
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* (Version 1.8.8 Build 874 to release 3.11.4) Need to edit manually in file directly
* (Release 3.12.0 onwards) Station Settings &rarr; Common Options &rarr; Advanced Options
| La Crosse max wind speed
| ???
| It is setting for the La Crosse max wind speed, where X is the maximum (before calibrated by any definitions in Offsets) wind speed in m/s that you want to allow. The value you supply should be in metres/second, regardless of what wind unit you are using in Cumulus
|}
 
It is assumed that [[Cumulus.ini_(Cumulus_1)#La_Crosse_specific:|most parameters remain same]]
 
===Oregon Scientific WM918/WMR928 Settings===
 
The Oregon Scientific code has not changed since the earliest beta MX (3.0.0) builds based on moving compiled code from Cumulus 1. 
 
It appears very few current Cumulus users own these obsolete models, so all these settings have to be added directly into the file, you can't edit them in the admin interface, and they will be missing from any configuration file created by any MX release.
 
* Introduced for legacy Cumulus, and unchanged by MX
* File Section is [Station], these settings need to be manually entered into file below that section heading
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | External to MX edit
!style="width:20px" | Default
!style="width:300px" | Description
|-  
|-  
| Create-humdata=0
|style="background:lightgray;"|[Station]
| [FTP site]
|
| Release 3.10.0
|  
| ^
|style="background:lightgray;"|Section name - the following parameters appear in Station section
| Internet Settings &rarr; Graph File Settings
|-
| humdata.json &rarr; Generate
|Humidity98Fix=0
| 1 (enabled)
| Stop MX and add this into file
| Simple tick or not
|0 (disable)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[humdata.json]] file
|Applies to weather station types that never report more than 98% relative humidity.
* Don't tick (value shown as 0 in Cumulus.ini) to disable
*0 = Disabled (default)
|-  
*1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98%.  Normally only useful for Oregon Scientific stations.
| Create-pressdata=0
|-
| [FTP site]
|LogExtraSensors=0
| Release 3.10.0
| Stop MX and add this into file
| ^
|0 (disable)
| Internet Settings &rarr;  Graph File Settings
|This setting determines whether MX looks for readings from extra temperature probes etc.  
| pressdat.json &rarr; Generate
*0=Disabled (default)
| 1 (enabled)
*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors..
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[pressdata.json]] file
|WMR928TempChannel=N
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Stop MX and add this into file
|-  
|(by default no extra sensors)
| Create-raindata=0
|for WMR-928 stations (and other serial stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
| [FTP site]
|-
| Release 3.10.0
|WMR200TempChannel=N
| ^
| Stop MX and add this into file
| Internet Settings &rarr;  Graph File Settings
|(by default no extra sensors)
| raindata.json &rarr; Generate
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
| 1 (enabled)
|}
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[raindata.json]] file
==Units, Derivative Options,  and Decimal Places==
* Don't tick (value shown as 0 in Cumulus.ini) to disable
 
For altitude units, please see [[#Location]].
 
* File Section is [Station]
* Edit on Station Settings page (except where indicated in bold as another page)
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Introduced
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-  
|-  
| Create-solardata=0
| AirQualityDecimals=1
| [FTP site]
| Release 3.9.2
| Release 3.10.0
| Units &rarr; Advanced Options (Here be dragons!)
| ^
| Air Quality decimals
| Internet Settings &rarr; Graph File Settings
| 1 (displayed as blank)
| solardata.json &rarr; Generate
| Number of decimal places for all outputs
| 1 (enabled)
|-
| Simple tick or not
| AvgBearingMinutes=10
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[solardata.json]] file
| Legacy Cumulus
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
| Common Options &rarr; Advanced Options (Here be dragons!)
|-
| Average Bearing Minutes
| Create-tempdata=1
| 10 (minutes)
| [FTP site]
| This parameter's value is the number of minutes over which Cumulus calculates (by treating the wind as a vector and taking into account the speed as well as direction) its average bearing
| Release 3.10.0
|-
| ^
| AvgSpeedMinutes=10
| Internet Settings &rarr; Graph File Settings
| Legacy Cumulus
| dailytemp.json &rarr; Generate
| Common Options &rarr; Advanced Options (Here be dragons!)
| 1 (enabled)
| Average Speed Minutes
| Simple tick or not
| 10 (minutes)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
| This parameter's value is the number of minutes over which Cumulus averages out reported current wind speeds
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| CalculatedDP=0
| Create-sunhours=0
| Legacy Cumulus
| [FTP site]
| Common Options
| Release 3.10.0
| Calculate dew point
| ^
| Unticked (shown as 0 in Cumulus.ini)
| Internet Settings &rarr; Graph File Settings
| Simple tick or not:
| dailytemp.json &rarr; Generate
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate dew point from temperature and humidity supplied by station
| 1 (enabled)
* Don't tick (value shown as 0 in Cumulus.ini) action depends on '''Calibration settings'''
| Simple tick or not
** If Cumulus has non-default multiplier and/or offset settings for temperature or humidity, Cumulus will calculate dew-point. This avoids the restriction in the Oregon Scientific stations where the dew point can never be below freezing point.
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
** If station provides dew point, then that will be used provided no multiplier/offsets have been specified for temperature or humidity
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
|-
|-  
| CalculatedWC=1
| Create-tempdata=0
| Legacy Cumulus
| [FTP site]
| Common Options
| Release 3.10.0
| Calculate wind chill
| ^
| Unticked (shown as 0 in Cumulus.ini)
| Internet Settings &rarr;  Graph File Settings
| Simple tick or not:
| tempdata.json &rarr; Generate
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate wind chill from temperature and wind speed
| 1 (enabled)
** Note that there is a maximum temperature, and minimum wind speed, for Cumulus to make the calculation, see [[Wind_chill]] page
| Simple tick or not
* Don't tick (value shown as 0 in Cumulus.ini) action depends on other items:
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[tempdata.json]] file
** If Cumulus has non-default multiplier and/or offset settings for temperature or wind speed, Cumulus will calculate wind chill
* Don't tick (value shown as 0 in Cumulus.ini) to disable
** If station does NOT make a wind chill value available to Cumulus,  Cumulus MX reports an error if you have not ticked this setting, (that is different to how the setting worked with the legacy software).
|-  
** If station provides wind chill, then that value will be used provided no multiplier/offsets have been specified for temperature or wind speed.
| Create-wdirdata=0
|-
| [FTP site]
| ChillHourSeasonStart=
| Release 3.10.0
| Legacy Cumulus
| ^
| Chill Hours
| Internet Settings &rarr;  Graph File Settings
| Chill Season Starts
| wdirdata.json &rarr; Generate
| Default depends on release
| 1 (enabled)
* (up to 3.11.4) 10 = October
| Simple tick or not
* (from 3.12.0) 4 in Southern hemisphere, 10 in Northern hemisphere
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[wdirdata.json]] file
| The value to enter is the month number (1=January, 12=December) and the Cumulative Chill Hours Count is reset to zero on the first of the selected month
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Create-websitedata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| websitedata.json &rarr; Generate
| 1 (enabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
 
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to process the '''websitedataT.json''' file into websitedata.json
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Create-winddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| winddata.json &rarr; Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[winddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Create-wxnow=0
| ChillHourThreshold=
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| Chill Hours
| ^ (disabled)
| Chill Hours
| (depends on release)
| Default depends on Temperature Units
* (releases 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
* Either 45 degrees Fahrenheit (equivalent to 7.22 <sup>o</sup>Celsius)
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
* Or 7 degrees Celsius (equivalent to 44.6 <sup>o</sup>Fahrenheit)
| wxnow.txt &rarr; Generate
| Chill Hours are incremented by the number of (fractional) hours that the air temperature is below the threshold. In practice, Cumulus simply detects if the current temperature is below the threshold and adds an increment equivalent to the (interval) time passed since the last temperature reading.
| 0 (disabled)
* You can put in any value you want, with a decimal place if required
| Simple tick or not
* Some people have put in the freezing-point temperature (0<sup>o</sup>C or 32 <sup>o</sup>F) and they relabel "chill hours" to "frost hours"
* Tick (value shown as 1 in Cumulus.ini) for MX to  generate a [[wsnow.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| DeleteBeforeUpload=0
| [FTP site]
| legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| Delete before upload
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to delete existing file (with same name) on the web server before it creates the new file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (this is the option appropriate to most servers)
|-
|-
| Directory=
| CloudBaseInFeet=0
| [FTP site]
| Legacy Cumulus
| Legacy Cumulus
| (always)  
| (As at 3.11.4, can only adjust in the file)
| Internet Settings &rarr; Web/FTP Site
|
| Remote FTP Directory
| 0 (default in MX is metres)
| (blank)
| Select units used for reporting theoretical cloud base:
| Directory (including path) on your server to which FTP (if 'Enabled' is enabled) will upload the files.
* 0 = metres (default if file created by MX)
*value is left Blank, default, the root position specified by ftp server
* 1 = feet (default if file created by legacy software)
*A path from the starting point as the position specified by ftp server
|-
| ErrorLogSpikeRemoval=1
| Legacy Cumulus
| '''Calibration Settings''' &rarr; Final tick box
| Log spike and limit violations to error log
| 1 (default in MX is enabled)
| Log spike and limit violations to error log (in MX this is in [[MXdiags folder]]):
* 1 = do log (default if file created by MX)
* 0 = don't log (default if file created by legacy software)
|-
| HourlyForecast=1
| Legacy Cumulus
| Forecast
| Update forecast hourly
| 1 (default in MX is enabled)
| When Cumulus derives its Zambretti forecast


Not used for ExtraRemoteNN parameters
Simple tick or not:
|-
* Tick (value shown as 1 in Cumulus.ini) then MX will derive a Zambretti forecast just once an hour, on the hour
| DisableEPSV=0
* Don't tick (value shown as 0 in Cumulus.ini) to derive a forecast every time MX does a process of the pressure reading
| [FTP site]
| Beta Release 3.0.0  build 3045
| No
| Still Change directly in file as at release 3.11.x
| (n/a )
| 0
| *0 = Disabled (default)
*1 = Enabled, to use Extended Passive FTP-mode
|-
|-
| DisableFtpsExplicit=0
| Humidity98Fix=0
| [FTP site]
| Legacy Cumulus
| Release  3.4.0 - Build 3064
| Common Options
| No
| Max humidity
| Change directly in file as at release 3.11.x
| 0 (disable)
| (n/a )
| For any weather station that never reports a relative humidity greater than 98%
| 0
 
| (change value following attribute)
Simple tick or not:
*0 = Disabled (default) use FTPS Explicit mode
* Tick (value shown as 1 in Cumulus.ini) then if weather station reading is 98%, process that as 100% for all outputs from MX
*1 = Enabled, to use FTPS Implicit mode
* Don't tick (value shown as 0 in Cumulus.ini) to always report what weather station reports for relative humidity
|-
| Enabled=1
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "File Transfer" option enabled
| Internet Settings &rarr; Interval Configuration
| Enable file transfer of standard files
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to enable file transfer of standard files (see rows marked ^ for further selections)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| EnableLocalCopy=0
| PeakGustMinutes=10
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "Copy" option enabled
| Internet Settings &rarr;  Interval Configuration
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to enable copying of files (see rows marked ^ for further selections)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| EnableRealtime=1
| [FTP site]
| Legacy Cumulus
| Legacy Cumulus
| (always)
| Common Options &rarr; Advanced Options (Here be dragons!)
| Internet Settings &rarr; Realtime Settings
| Peak wind gust time
| Enable Realtime
| 10 (minutes)
| 0 (disabled)
| MX waits until a gust has been measured for number of minutes specified by value of parameter, before checking whether previous gust extreme record have been exceeded
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a timer that will permit real time actions
| PressDecimals=1
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Release 3.9.2
| Units &rarr; Advanced Options (Here be dragons!)
| Pressure decimals
| Default depends on Pressure Units  (displayed as blank)
* default is 1 if units are hPa or mb
* default is 2 if units are inches of mercury
| Number of decimal places for all outputs
|-
|-
| Ftp-airquality=0
| PressureUnit=1
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| Units
| ^
| Pressure
| Internet Settings &rarr;  Graph File Settings
| Depends on release:
| airquality.json &rarr; File Transfer
# Legacy to 3.11.4: 0 (mbar)
| 1 (enabled)
# 3.12.0 onwards: 1 (hPa)
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the airquality.json file to your local web server (need to select "Generate" too)
| Drop-down:
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
* 0 = millibar (mb)
|-  
* 1 = hectoPascals (hPa)
| Ftp-alldailydegdaydata=0
* 2 = inches of mercury (in Hg)
| [FTP site]
|-
| Release 3.10.0
| RainDayThreshold=
| ^
| Legacy Cumulus
| Internet Settings &rarr; Graph File Settings
| Common Options &rarr; Advanced Options
| alldailydegdaydata.json &rarr; File Transfer
| Rain day threshold
| 1 (enabled)
| Default is -1 which depends on Rainfall Units AND station type
| Simple tick or not
* -1 = normally 0.2 if units are millimetres
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailydegdaydata.json file to your local web server (need to select "Generate" too)
* -1 = normally 0.01 if units are inches
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Otherwise enter a value in your selected units
|-  
| For derivatives like count of consecutive wet/dry days, any daily rainfall less than this threshold will be ignored.
| Ftp-alldailyhumdata=0
 
| [FTP site]
(If rainfall is measured in tips, usually set to just over one tip, as first tip of day might be result of less that one tip accumulated on earlier days or because of dew)
| Release 3.10.0
|-
| ^
| RainDecimals=1
| Internet Settings &rarr; Graph File Settings
| Release 3.9.2
| alldailyhumdata.json &rarr; File Transfer
| Units &rarr; Advanced Options (Here be dragons!)
| 1 (enabled)
| Rainfall decimals
| Simple tick or not
| Default depends on Rainfall Units  (displayed as blank)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
* default is 1 if units are millimetres
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* default is 2 if units are inches
|-
| Number of decimal places for all outputs
| Ftp-alldailypressdata=0
|-
| [FTP site]
| RainSeasonStart=1
| Release 3.10.0
| Legacy Cumulus
| ^
| Annual Rainfall
| Internet Settings &rarr;  Graph File Settings
| Start of rainfall season
| alldailypressdata.json &rarr; File Transfer
| 1 (Jan)
| 1 (enabled)
| Drop-down
| Simple tick or not
* 1 = January
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* 2 = February
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* 3 = March
|-  
...
| Ftp-alldailyraindata=0
* 9 = September
| [FTP site]
* 10 = October
| Release 3.10.0
* 11 = November
| ^
* 12 = December
| Internet Settings &rarr;  Graph File Settings
 
| alldailyraindata.json &rarr; File Transfer
Added in late 2010 because Cumulus users in Israel said they do not total rainfall from January.
| 1 (enabled)
 
| Simple tick or not
It was welcomed by people outside Israel, it turned out growers are often interested in a growing season rainfall total
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| RainUnit=0
|-  
| Legacy Cumulus
| Ftp-alldailysolardata=0
| Units
| [FTP site]
| Rain
| Release 3.10.0
| 0 (mm)
| ^
| Drop-down:
| Internet Settings &rarr;  Graph File Settings
* 0 = millimetres
| alldailysolardata.json &rarr; File Transfer
* 1 = inches
| 0 (disabled)
|-
| Simple tick or not
| RoundWindSpeed=0
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
| Legacy Cumulus
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
| Common Options
|-  
| Rounding of wind speed
| Ftp-alldailytempdata=0
| 0 (no)
| [FTP site]
| Simple tick or not, (only applicable if any reported wind speed would otherwise include decimal places):
| Release 3.10.0
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will round all the wind speeds it reports to nearest integer
| ^
* Don't tick (value shown as 0 in Cumulus.ini) then Cumulus will report wind speeds to the precision defined in "WindSpeedDecimals", "WindSpeedAvgDecimals", and "WindRunDecimals", parameters
| Internet Settings &rarr; Graph File Settings
|-
| alldailytempdata.json &rarr; File Transfer
| SunshineHrsDecimals=2
| 1 (enabled)
| Release 3.8.0
| Simple tick or not
| Units &rarr; Advanced Options (Here be dragons!)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
| Sunshine hours decimals
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| 2 (displayed as blank)
|-  
| Select a number of decimal places to overwrite the default
| Ftp-alldailywinddata=0
|-
| [FTP site]
| TempDecimals=1
| Release 3.10.0
| Release 3.9.2
| ^
| Units &rarr; Advanced Options (Here be dragons!)
| Internet Settings &rarr; Graph File Settings
| Temperature decimals
| alldailywinddata.json &rarr; File Transfer
| 1 (displayed as blank)
| 1 (enabled)
| Select a number of decimal places to overwrite the default
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
| TempUnit=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Legacy Cumulus
|-  
| Units
| Ftp-alltempsumdata=0
| Temperature
| [FTP site]
| 0 (<sup>o</sup>C
| Release 3.10.0
| Drop-down:
| ^
* 0 = Celsius
| Internet Settings &rarr;  Graph File Settings
* 1 = Fahrenheit
| alltempsumdata.json &rarr; File Transfer
|-
| 1 (enabled)
| UseCumulusForecast=0
| Simple tick or not
| Legacy Cumulus
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alltempsumdata.json]] file to your local web server (need to select "Generate" too)
| Forecast
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Use Cumulus Forecast
|-  
| Ftp-availabledata=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| availabledata.json  &rarr; File Transfer
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not:
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will generate a simple weather Zambretti forecast, if your station does not supply a forecast, or as an alternative to the one supplied by your station. Please see [[Forecast_webtag]] for details.
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) then MX will not do any forecasting, so it will return "not available" unless your weather station provides an alternative forecast
|-
|-
| Ftp-dailyrain=0
| UseCumulusPresstrendstr=0
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| Common Options
| ^
| Cumulus pressure trend names  
| Internet Settings &rarr;  Graph File Settings
| 0 (depends on weather station type)
| dailyrain.json &rarr; File Transfer
| Simple tick or not:  
| 1 (enabled)
* Tick (value shown as 1 in Cumulus.ini) then MX will generate the name for the current pressure trend, e.g. "Falling", "Rising quickly" etc, instead of the one supplied by your station. The names used are those in the UK Shipping Forecast, but can be modified using [[strings.ini]].
| Simple tick or not
* Don't tick (value shown as 0 in Cumulus.ini) then effect depends on whether your weather station supplies pressure trends
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
** If your station does supply pressure trends, then MX will use those
* Don't tick (value shown as 0 in Cumulus.ini) to disable
** If your station does not supply pressure trends, then MX will generate the name for the current pressure trend, e.g. "Falling", "Rising quickly" etc, instead of the one supplied by your station. The names used are those in the UK Shipping Forecast, but can be modified using [[strings.ini]].
|-
|-
| Ftp-dailytemp=0
| UseSpeedForAvgCalc=0
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| Common Options
| ^
| Use speed for average calculation
| Internet Settings &rarr;  Graph File Settings
| 0 (disable)
| dailyrain.json &rarr; File Transfer
| Simple tick or not:  
| 1 (enabled)
* Tick (value shown as 1 in Cumulus.ini) then MX will use what the weather station supplies as "wind speed" to calculate the average wind speed.
| Simple tick or not
* Don't tick (value shown as 0 in Cumulus.ini) then MX will use what the weather station supplies as "latest wind speed" to calculate the average wind speed
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
Please see [[Wind_measurement#Weather_Stations_and_Cumulus]] for more details.
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| UseZeroBearing=1
| Ftp-graphconfig=0
| Legacy Software
| [FTP site]
| Common Options
| Release 3.10.0
| Use bearing zero when calm
| ^ (once only)
| 1 (enable)
| Internet Settings &rarr;  Graph File Settings
| Simple tick or not:  
| graphconfig.json &rarr; File Transfer
* Tick (value shown as 1 in Cumulus.ini) then MX will report a wind bearing of zero when the wind is calm
| 1 (enabled)
* Don't tick (value shown as 0 in Cumulus.ini) then MX will continue to report the last wind bearing when the wind stops blowing
| Simple tick or not
|-
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
| UVDecimals=1
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Release 3.9.2
|-
| Units &rarr; Advanced Options (Here be dragons!)
| Ftp-humdata=0
| Ultra Violet decimals
| [FTP site]
| 1 (displayed as blank)
| Release 3.10.0
| Select a number of decimal places to overwrite the default
| ^
| Internet Settings &rarr;  Graph File Settings
| humdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[humdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-pressdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| pressdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[pressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-raindata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| raindata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[raindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-solardata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| solardata.json &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[solardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
| Ftp-sunhours=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| sunhours.json &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[sunhours.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
| Ftp-tempdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| tempdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[tempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-wdirdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| wdirdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-websitedata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Standard File Settings
| websitedata.json &rarr; File Transfer
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
 
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the resulting websitedata.json to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-winddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| dailyrain.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-wxnow=0
| [FTP site]
| Release 3.10.0
| ^ (disabled)
| (depends on release)
* (release 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
| wxnow.txt &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| ForumURL=
| [Web Site]
| Legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Site
* (release 3.12.0 on)  Internet Settings &rarr; Miscellaneous
| Forum URL
| (blank)
| Left blank to allow you to choose format
 
3.10.0 Default web pages use "<a href=\"https://cumulus.hosiene.co.uk/index.php\">forum</a>"
 
Some alternative URL examples:
*https://cumulus.hosiene.co.uk/index.php (for above example in default web pages)
*https://cumulus.hosiene.co.uk
*https://cumulus.hosiene.co.uk/search.php?search_id=active_topics
|-
| FTPlogging=0
| [FTP site]
| Legacy Cumulus
| FTP logging
| Depends on release installed:
# (Releases 3.1.0 to 3.10.5) Internet Settings &rarr;  &rarr; Web Settings &rarr; General Settings
# (Releases 3.11.0 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| (n/a)
| (n/a)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX in standard FTP mode add output to [[ftplog.txt]].
to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable updates to '''ftplog.txt'''
For other types of file transfer (STTP, FTPS), any extra diagnostic information appears in latest log in [[MXdiags folder]]
|-
| FTPRename=1
| [FTP site]
| Legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| FTP rename
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
The chief advantage of using rename is that it minimises the time that the web server cannot serve a file (while it is being updated)
|-
| Host=
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Web/FTP Site
| Host name
| (blank)
| This is either the name, or the IP address, of the ftp server to which you connect when you upload pages to your web site.
|-
| IncludeMoonImage=1
| [FTP site]
| Release 3.5.0
| (always)
| Internet Settings &rarr; Moon Image
| Upload Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer moon image file to your local web server (need to select "Generate Moon Image" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|IntervalFtpEnabled=1
| [FTP site]
| Release 3.12.0
| ??
| Internet Settings &rarr; Interval Settings
| Enable file transfer update interval
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file transfer actions
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected '''LocalCopyEnabled''' (see below)
|-
| ListWebTags=0
| [Station]
| Legacy Cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to create ''WebTags.txt'' file when Cumulus is restarted (contains an unordered list of all the tag names your Cumulus build will recognise and process)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| LocalCopyEnabled=0
| [FTP site]
| Release 3.12.0
| (always)
| Internet Settings &rarr; Interval Configuration
| Enable local copy update interval
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file copy actions
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected file transfer '''IntervalFtpEnabled''' (see previous)
|-
| LocalCopyFolder=
| [FTP site]
| Release 3.12.0
| (always)
| Internet Settings &rarr; Interval Configuration
| (blank)
| Folder (including path) to which MX will copy the standard files (see rows marked ^ for further selections) if 'EnableLocalCopy' is enabled
|-
| Password=
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Web/FTP Site
| Password
| (blank)
| The password for your FTP/SFTP/FTPS connection (masked out on settings page, shown in plain text in file)
|-
| Port=21
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Web/FTP Site
| FTP port
| 21 (plain FTP)
|you normally use either standard FTP (port=21), SSH for FTP i.e. SFTP (port=22), or SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) i.e.FTPS (port=990 normally, may be 25). If you get connection refused, messages in the MXdiags log, then you may need to try alternative protocol and/or alternative ports.
|-
| RealtimeFTPEnabled=0
| [FTP site]
| Legacy Cumulus
| ^
| Internet Settings &rarr; Realtime Settings
| Enable realtime FTP
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to be able to do file transfers at real-time interval
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeGaugesTxtCopy=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[SteelSeries_Gauges|realtimegauges.txt]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeGaugesTxtCreate=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt &rarr; Generate
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[SteelSeries_Gauges|realtimegauges.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeGaugesTxtFTP=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt &rarr; File Transfer
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[SteelSeries_Gauges|realtimegauges.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeInterval=45000
| [FTP site]
| Legacy Cumulus
| ^
| Internet Settings &rarr; Realtime Settings
| Realtime interval
| 45000 milliseconds (45 seconds)
| Enter interval time in seconds (decimals allowed), stored in file converted to milliseconds
|-
| RealtimeTxtCopy=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtime.txt
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[realtime.txt]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeTxtCreate=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtime.txt &rarr; Generate
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[realtime.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeTxtFTP=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtime.txt &rarr; File Transfer
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[realtime.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RecordSetTimeoutHrs=24
| [Station]
| Release 3.5.1
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
| Record set timeout
| 24
| Number of hours before the following web tags are reset: TempRecordSet, WindRecordSet, RainRecordSet, HumidityRecordSet, PressureRecordSet, HighTempRecordSet, LowTempRecordSet, HighAppTempRecordSet, LowAppTempRecordSet, HighHeatIndexRecordSet, LowWindChillRecordSet, HighMinTempRecordSet, LowMaxTempRecordSet, HighDewPointRecordSet, LowDewPointRecordSet, HighWindGustRecordSet, HighWindSpeedRecordSet, HighRainRateRecordSet, HighHourlyRainRecordSet, HighDailyRainRecordSet, HighMonthlyRainRecordSet, HighHumidityRecordSet, HighWindrunRecordSet, LowHumidityRecordSet, HighPressureRecordSet, LowPressureRecordSet, LongestDryPeriodRecordSet, LongestWetPeriodRecordSet, HighTempRangeRecordSet, LowTempRangeRecordSet
|-
| Sslftp=
| [FTP site]
| MX beta
| (always)
| Internet Settings &rarr; Web/FTP Site
| Select the FTP Protocol to use
| 0
| Drop down list:
* 0 = FTP (plain old FTP) - default
* 1 = Use SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) for FTP (FTPS)
* 2 = Use Secure Shell Home (SSH) for FTP (SFTP)
|-
| SshFtpAuthentication=Password
| [FTP site]
| Release 3.8.2 - build 3092
| Only if SFTP selected above
| Internet Settings &rarr; Web/FTP Site
| SFTP Authentication method
| Password
|Drop down list:
* 0 = Password
* 1 = Pre-shared key
* 2 = Password or pre-shared key
|-
| SshFtpPskFile=
| [FTP site]
| Release 3.8.2 - build 3092
| only if 1 or 2 selected in previous setting
| Internet Settings &rarr; Web/FTP Site
| Pre-shared Private Key file for SFTP
| (blank)
| Filename for your private PSK file, include the full path if the file is not in same folder as  CumulusMX.exe
|-
| UpdateInterval=60
| [FTP site]
| legacy software
| ^
| Internet Settings &rarr; Interval Settings
| Web interval
| 60
| Interval between standard web updates in minutes
|-
| Username=
| [FTP site]
| legacy software
| (always)
| Internet Settings &rarr; Web/FTP Site
| Username
| (blank)
| the user name for connecting to your server
|-
| UTF8encode=
| [FTP site]
| legacy software
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| UTF-8 encoding
| Default depends on release:
* (Legacy versions and MX up to 3.9.7) 0 (ISO 8859-1 character set)
* (Release 3.10.0 on) 1 (UTF-8 encoding enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to use [[Reports_folder#Encoding|'''UTF-8''' encoding]] in all [[:Category:JSON Files|.json files]]
* Don't tick (value shown as 0 in Cumulus.ini) and MX will create its .json files using '''ISO 8859-1 character set''', ''please note that this encoding is incompatible with [[New_Default_Web_Site_Information#Installing_the_new_template_for_new_users|web pages]] included in '''webfiles''' folder''; so if you upgrade from an earlier release, you may need to change this setting
|-
|WebcamURL=
| [Web Site]
| Legacy Software
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Site
* (release 3.12.0 on)  Internet Settings &rarr; Miscellaneous
| Webcam URL
| (blank)
| Can be used to add a link to any other web page, you have on any web server. In default web pages will be labelled as "web cam", but for your own web pages, this might lead to a home or blog page.
|}
 
==Program Start-up Options==
 
* Introduced release 3.9.4 - b3099
* File Section is [Program]
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:160px" | MX Section
!style="width:160px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
|StartupPingHost=
| Program Settings &rarr; Program Start-up Options
|Host to PING on program start-up
|None (no remote host)
| Add a hostname or IP to address to ping at startup. Cumulus waits until the ping is successful before trying to read from your station. Leave blank to disable
|-
|StartupPingEscapeTime=999
| Program Settings &rarr; Program Start-up Options
|PING escape time (mins)
|999 (minutes)
|Specify a time after which if no ping response is received carry on starting Cumulus MX anyway
|-
|StartupDelaySecs=0
| Program Settings &rarr; Program Start-up Options
|Start-up Delay (secs)
|zero (no delay)
|Add a delay before the Cumulus tries to start reading the station.
|-
|StartupDelayMaxUptime=300
| Program Settings &rarr; Program Start-up Options
|Max system uptime to apply the start-up delay
|300 (seconds equivalent to 5 minutes)
|The time that has passed sice MX was started (up-time) is compared against the (max delay time) figure here.
*If max delay time less than up-time, the delay specified in previous parameter will NOT be applied
*If up-time less than this max delay time, then MX will apply any delay specified in previous parameter
*If this parameter is set to zero, then MX will always apply any delay specified in previous parameter
|}
 
==Proxy==
 
This is a continuation of an experimental legacy Cumulus software feature, please see [https://cumulus.hosiene.co.uk/viewtopic.php?f=4&t=728 here for request] and see [[Cumulus.ini_(Cumulus_1)#Proxies|here]] for potential content.  I have not seen any evidence that this feature ever came out of beta, and nobody has ever commented on its use, so I see no reason to do any further documentation.
 
==Station specific alternatives==
 
A number of settings are shown only for specific station types, and so the following tables are grouped here.
 
Since MX is being developed by someone who uses a Davis station, a lot of "Labels on the Settings Screens" mention "Davis" even if you have selected a different station, because the code was written by copy and paste!
 
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | File Section
!style="width:100px" | Introduced
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:800px" | Description
|-
|Type= -1
| [Station]
| 0 (all releases), 1 (Early legacy releases), 2 and 3 (from version 1.7.0), 4 (from version 1.7.12), 5 (from version 1.8.0), 6 (from version 1.8.3), 7 (from version 1.9.1), 8 to 10 (from release 1.9.2), 11 (from a MX beta build), and 12 (from release 3.2.0)
| Station Settings &rarr; General Settings
| Station type
| -1 (not yet defined)
| Drop-down
* -1 = "Select Station", shown before a selection from those below is made
* 0 = Davis Vantage Pro station
* 1 = Davis Vantage Pro2 or Vue station
* 2 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) which have a serial port connection and have wireless connection (e.g. WMR-928 station)
* 3 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) which have a serial port connection and have wired connection (e.g. WM-918 station)
* 4 = Reading from file [[EasyWeather_Format#Usage_of_easyweather.dat_fields_for_Cumulus_input_of_latest_record: |EasyWeather.dat]] (using EasyWeather software version 6.2, or earlier, running continuously with Cumulus). Fine Offset weather stations that record Solar and UV measurements output to [[EasyWeather_Format#EasyWeatherPlus.dat| EasyWeatherPlus.dat file]] when Easyweather software version 6.x is running. This has the same fields as easyweather.dat, plus two extra fields for Solar and UV data at the end, and so Cumulus can understand the fields you must also have '''LogExtraSensors=1''' set.
'''NOTE:''' You can also use ''Type=4'' if you want to run Cumulus with reduced functionality without a weather station attached, to view historical observations. A full set of (historic) files in the ''data'' subfolder copied from a system with a weather station attached is needed, but in this case, the [[#Introduced for problems with Fine Offset family:| EWFile= ]] attribute should be at its default of not having any filename value.
* 5 = Fine Offset, Maplin, Chas Olsen, MyDEL, Nevada, Watson, Tycon Power, Aercus, etc as defined in [[Supported_Devices#Fine_Offset|Fine Offset section in Supported_Devices article]] ('''without''' solar measurement sensors (with or without solar recharging))
* 6 = For all La Crosse WS23xx models e.g. WS2300
* 7 = Fine Offset/Watson/MyDel etc '''with Solar Sensors''' as defined in [[Supported_Devices#Fine_Offset_with_UV/Light sensor|Fine Offset with UV/Light sensor in Supported_Devices article]].
* 8 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) using [[WMR100-200_Protocol]] e.g. WMR100
* 9 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) using [[WMR100-200_Protocol]] e.g. WMR200
* 10 = Instromet (with optional extra solar sensors or without)
* 11 = Davis WLL
* 12 = Ecowitt GW1000 and Froggit DP1500 (and any equivalents)
 
'''Selection made here determines what MX sections appear on the Station Settings page
|-
| Model=
| [Station]
| Early legacy version
| Station Settings &rarr; General Settings
| Station model
| (empty) 
|The weather station model description that you want output by the web tag &lt;#stationtype>
|}
 
===Airlink===
 
* Introduced Release
* File Section is [AirLink]
* Not Shown on Settings page?
IsWllNode=0
WLv2ApiKey=
WLv2ApiSecret=
AutoUpdateIpAddress=1
In-Enabled=0
In-IPAddress=0.0.0.0
In-WLStationId=-1
In-Hostname=
Out-Enabled=0
Out-IPAddress=0.0.0.0
Out-WLStationId=-1
Out-Hostname=
AQIformula=0
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Shown on Settings page?
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
|
|}
 
===Davis===
 
Two Wiki sub-sections:
 
 
====Davis VP/VP2/Vue====
 
 
{{Template:WorkInProgressBanner}} This table does not yet have all details in it.
* Introduced for leagacy Cumulus
* File Section is [Station]
* Only "Shown on Settings page" if either "Type=0" or "Type=1"
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:60px" | Label on Settings page
!style="width:120px" | Default
!style="width:800px" | Description
|-
|style="background:lightgray;"|[Station]
|
|
|style="background:lightgray;"|Section name - the following parameters appear in Station section
|-
|VP2SleepInterval=500
|
|500 (milli-seconds)
|the period which Cumulus waits between reads of the data from Davis stations, the value is in milliseconds.
* if you suspect that data is being missed, reduce number
*For VirtualVP users, tests revealed that VP2SleepInterval = 1100 seems to work the best. It updates every two seconds with few exceptions.
|-
|VPClosedownTime=x
|
|(default not yet documented)
| x is the number of seconds after the start of the re-connect attempts that you want the program to close itself
|-
|DavisCalcAltPress=1
|
|1
|Davis stations calculate Sea Level Pressure (SLP) from Station Pressure (SP) using a formula based on temperature, humidity, and altitude
 
CWOP require 'Altimeter Pressure' (AP) to be uploaded, i.e. a value calculated simply using altitude.
*0 = Use SLP supplied by Davis
*1 = Convert the SP Davis supplies to AP using the altitude you have supplied.
|-
|SyncDavisClock=0
|
|0
|When set, at Cumulus start-up and at a fixed time (default 04:00, see next parameter) each day, Cumulus will set the Davis VP/VP2 clock to within a minute of the same time as the PC. (From build 3015 for MX).
*0 = Disabled, default (as deselected on the Station Configuration Screen)
*1 = Enabled, ensures that when Cumulus asks the station for data since time X, both recognise X!
|-
|ClockSettingHour=4
|
|4
|Controls what hour of the day the SyncDavisClock activity will take place if it is enabled.
*4 = 04:00 (default value)
*0-23 = 00:00 to 23:00
|-
|VP2ConnectionType=1
|
|
|Weather station connection type
*0 = serial (see next parameter to specify COM port)
*(1 = usb - setting no longer available on screen, remains as default in cumulus.ini for those not using a Davis)
*2 = TCP/IP (see later parameters to specify ports)
Default is type 1, i.e. neither option on screen selected, so if you use a Davis you must select either serial or TCP/IP.
|-
|VP2TCPPort=22222
|
| 2222
|Communications port used if VP type has TCP/IP selected.
|-
|VP2IPAddr=0.0.0.0
|
| 0.0.0.0
|Weather station IP address if VP type has TCP/IP selected.
|-
|VP2PeriodicDisconnectInterval=0
|
|0 (disable)
|When the clock minute changes, Cumulus stops the current stream of data from the console, disconnects, waits for the specified number of milliseconds, to allow the Weatherlink IP to briefly connect to the Davis Weatherlink site. Cumulus then attempts to reconnect.
 
Set it to zero to disable, if you are not using the Weatherlink site.
|-
|LogExtraSensors=0
|
|0
|This is set in the '''Settings''' block on the Station settings screen off the configuration menu. Set this to 1 if you have additional sensors (e.g. a Davis Leaf Wetness probe) to make Cumulus read, display, and log the readings from the sensors. You don't select this for Solar/UV sensors.
|-
|UseDavisLoop2=1
|
|1 (use Loop2)
|The current MX code uses ''LOOP2'' for two purposes. First, it uses the 'peak 10-minute gust' value, to avoid the problem where a gust might be missed, and secondly it uses the 'absolute pressure' value to make calculation of 'altimeter pressure' easier and more accurate. This is mainly used if you upload to CWOP.
*1 (default) = Cumulus MX will use the LOOP2 packet for Davis Weather Stations by default.  The LOOP2 packet is supported on the VP2 with firmware version 1.90 or later, and on the Vue.
*0 = Select this if you have a Vantage Pro (i.e. the original 'VP1'), or a VP2 with pre-1.90 firmware, or if you are using Virtual VP, none of these support the LOOP2 packet.
 
Without this setting, Cumulus will revert to calculating the 10-minute gust value itself from the individual wind speed readings, but it will not currently attempt to calculate altimeter pressure correctly, it will simply use the sea-level pressure instead. This is likely to be an issue if you are at high altitude and you upload to CWOP using Cumulus MX.
|-
|DavisIPResponseTime=500
|
|500
|The length of time in milliseconds which Cumulus waits to allow a response from the console to a command (i.e. a request for any kind of data) from an IP logger, see Cumulus MX forum where times up to 2000ms are suggested.
|-
|ForceVPBarUpdate=0
|
|0 (normal)
| Added in build 3042 (January 2017).
 
The default (value=0) is to assume standard barometer updates on Davis stations. Set to 1, by adding ForceVPBarUpdate=1 in [Station] section to force more frequent barometer updates on Davis stations. Steve says "Having checked the code, I see it asks for 20 packets from the 'LOOP2' if the barometer forcing is on, otherwise it stops receiving LOOP data after 50 packets". Note that ForceVPBarUpdate=1 is only useful on very old versions of the console firmware.
|-
|DavisIncrementPressureDP=0
|
|1
|(from version 3.0.0 build 3042)
* 0= Pressure values shown to 1 decimal places when reported in mb/hPa, shown to 2 decimal places for inHg
* 1= Pressure values shown to 2 decimal places when reported in mb/hPa, shown to 3 decimal places for inHg
|-
|VPrainGaugeType=0
|
|1
|Specifies the units selected on your Vantage Pro Rain Gauge.
*0 = Metric Rain Adapter fitted, a 0.2mm gauge
*1 = Imperial gauge without adapter, a 0.01" gauge.
Note that if the units you choose for rainfall do not match your rain gauge type, conversion rounding errors will then occur.
|-
|DataLogging=0
|
|0
|(Build 3018 onwards).
*0 (default) = Cumulus MX will not add extra logging.
*1 = To add extra logging to the diags file for data received from Davis stations. Use this with care, the log will get very large.
I've also added some more diagnostics to try to find the cause of the problem where data stops being read from Davis stations. Debug logging is required to be turned on. (Build 3022 onwards).
|-
|AutoUpdateIpAddress=1
|
|1
|default = 1, set to 0 to switch off the WLL autodetection of IP address. This is a workaround for a WLL firmware bug that does not update the IP address when it changes using DHCP.
|-
|ZeroConfig
|
|(default not known)
|set this on station settings screen; to enable/disable the entry/update of the stations IP address via auto-discovery
|}
 
====Davis WeatherLink Live====
 
{{Template:WorkInProgressBanner}} This table has not been populated yet
* Introduced in a MX beta build
* File Section is [WLL]
* Only "Shown on Settings page" if "Type=11"
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-
|style="background:lightgray;"|[Station]
|
|
|style="background:lightgray;"|Section name - the following parameters appear in Station section
|-
|
|
|
|
|}
 
===EasyWeather (Reading File instead of connecting to a Weather Station)===
 
 
* Introduced in a Legacy version
* File Section is [Station]
* MX Section is "EasyWeather File Settings"
* Only "Shown on Settings page" if "Type=4"
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:60px" | Label on Settings page
!style="width:120px" | Default
!style="width:800px" | Description
|-
| EWInterval=10
| File Read Interval
| 10 (minutes between new line becoming available in file)
| Cumulus needs to know how often to read a new record from the easyweather.dat file. Enter any number in box.
*0= Default, meaning not applicable
*n= any positive decimal value representing Easyweather version 6.2, or earlier, logging interval in minutes  (used for reading single latest observations from [[EasyWeather_Format#Usage_of_easyweather.dat_fields_for_Cumulus_input_of_latest_record: |Easyweather]] software output). Note to specify seconds, use decimal minutes, e.g. 30 seconds = 0.5
|-
| EWFile=
| Filename
| (empty)
| * Full file path/name for [[EasyWeather_Format#Usage_of_easyweather.dat_fields_for_Cumulus_input_of_latest_record: |Easyweather.dat or EasyWeatherPlus.dat]]
* (empty) (i.e. attribute and equals sign, but no value)  '''Note:''' If you want to run Cumulus without an attached weather station (because your station has a fault or because you have a second PC), it is possible to run Cumulus with station '''Type=4''' but with the default of no file specified in this parameter. The full Cumulus directory structure and its files including those in the ''data'' sub-directory are needed (kept from when your station was working or copied from the PC with the station). Although only the old observations can be accessed, (no new ones are being added), this does allow analysis of the old observations via all Cumulus features
 
See [[FAQ#Cumulus_isn.27t_performing_periodic_tasks.2C_like_data_logging_or_web_uploads|FAQ here]] for reduced functionality using Cumulus 1 in this way.
|-
| EWminpressureMB=900
| Minimum Pressure Value
| 900
| Cumulus will ignore all pressure readings from the station that are less than this value (units are always hPa/millibars)
|-
| EWmaxpressureMB=1200
| Maximum Pressure Value
| 1200
| Cumulus will ignore all pressure readings from the station that are greater than this value (units are always hPa/millibars)
|-
| EWMaxRainTipDiff=40
| Rain Tip Difference
| Default=30 tips in Cumulus 1, MX default is 40 tips
| This configurable threshold is the maximum feasible amount of rain between updates (i.e. within 48-seconds on Fine Offset stations without solar, 60 seconds on those measuring solar), set in units of count of tips.
 
For standard Fine Offset rain gauges, each tip represents 0.3mm, so 30 tips are equivalent to 9 mm, or just over a third of an inch in 48 seconds.
 
This setting affects rain rate, rain last hour, rain so far today (and what is recorded in today.ini/dayfile.txt), but does not affect the web tag <#r24hour>.
|-
| EWpressureoffset=x.y
| Pressure Offset
| 9999
| The pressure that Cumulus MX processes is equal to what read in the file plus the value set for this parameter. Normally used to convert the station pressure to the equivalent Sea Level Pressure.
|}
 
===Ecowitt GW1000 and Froggit DP1500 (and any equivalents) specific===
 
* Introduced in release 3.2.0
* File Section is [GW100]
* MX Section is "Ecowitt GW1000 Settings"
* Only "Shown on Settings page" if "Type=12"
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
|AutoUpdateIpAddress=1
|Auto-discovery
|1 (selected)
|Should MX attempt to discover IP address
*0=Disable
*1=Enable
|-
|IPAddress=
|IP address
|(no default)
| stores the IP address of your GW1000 WiFi logger
|-
|MACAddress=
|MAC addresss
|(no default)
|Populated by MX when auto-discovery enabled
|}
 
 
===Fine Offset Stations===
 
 
{{Template:WorkInProgressBanner}} This table has not been populated yet
 
* Introduced in a Legacy version
* File Section is [Station]
* MX Section is "Fine Offset Settings"
* Only "Shown on Settings page" if either "Type=5" or "Type=7"
 
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-
| SyncFOReads=0
| Synchronise Reads
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to attempt to work out when your Fine Offset is writing data to the console log, so that MX does not read the Fine Offset circular memory when it is being updated
* Don't tick (value shown as 0 in Cumulus.ini) for MX to read the Fine Offset circular memory whenever it next wants data
Selecting this parameter has given some problems in earlier MX builds, so the code has recently been rewritten.
|-
| FOReadAvoidPeriod=3
| Read Avoid Period
| 3 (seconds)
| If previous setting enabled, MX will avoid reading the circular memory from the number of seconds specified before it expects Fine Offset to be writing to the circular memory, to the number of seconds specified after it expects Fine Offset to be writing to the circular memory
 
(One issue is that Fine Offset will move from one position to the next position in the circular memory, at the Fine Offset Logging Interval, but will delay this move by up to one minute, if the existing memory position is actually being updated by a read from the sensors and normally those updates happen every 40 seconds for non-solar sensors, and every 60 seconds for solar sensor)
|}
 
 
 
{{Template:WorkInProgressBanner}}
There are a number of settings in a MX sub-section called "Fine Offset Advanced Options".  These are new settings, and have not been documented yet.
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Shown on Settings page?
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
|
|}
 
===Instromet Settings===
 
 
{{Template:WorkInProgressBanner}} The following table has some gaps to fill in
 
* Introduced in a Legacy version
* File Section is [Station]
* MX Section is "Instromet Settings" or "Instromet Advanced Options" as indicated
* Only "Shown on Settings page" if either "Type=5" or "Type=7"
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:300px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
| ComportName=xxxxxx
| Station Settings &rarr; Instromet Settings
| Serial port name
| /dev/ttyUSB0 (on Linux), COM1 (on Microsoft Windows)
| Only required if your station is connected via a real, or virtual, serial port
|-
|ImetBaudRate=19200
| Station Settings &rarr; Instromet Settings
| Serial Baud Rate (DavisBaudRate)
| 19200
| Some ?older? Instromet loggers operate at 115200, if you have one of these older loggers you will need to reset this value
|-
| "SyncDavisClock=0" and "ClockSettingHour=4"
| Station Settings &rarr; Instromet Advanced Options
| "Sychronise Station Clock" and "Clock sync hour"
| Tick box not selected, data box set to 4
| Note despite the name of the parameter within 'Cumulus.ini', this does apply to Instromet stations.
 
*Simple tick or not
** Tick (value shown as 1 in Cumulus.ini) for MX to attempt to sychronise the Instromet Station Clock with your computer time. This ensures that when Cumulus asks the station for data since time X, both recognise X as representing same time!
** Don't tick (value shown as 0 in Cumulus.ini) if you don't want MX to attempt to keep station clock in line with computer clock
* Box taking an integer
** The hour of the day when,  if enabled, Cumulus will set the Instromet clock to within a minute of the same time as the computer. This will happen at a default time of 04:00 each day, (4 a.m.) unless the setting box is edited
|-
| ImetUpdateLogPointer=1
| Station Settings &rarr; Instromet Advanced Options
| Update logger pointer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to update the memory pointer to the last record after every 30 data reads
* Don't tick to disable this action
|-
|ImetWaitTime=500
| Station Settings &rarr; Instromet Advanced Options
| Delay between sending data read commands
| 500
| Specifies the time in milliseconds that Cumulus waits after one read, before it does the next read from an Instromet station. According to the specification, 500 ms is the absolute maximum time that the station should take to respond to any command.  For Cumulus 1, the default was 200 milli-seconds, so you might try that too.
|-
| ImetReadDelay=500
| Station Settings &rarr; Instromet Advanced Options
|  Delay after sending a command before trying to read data from the serial port
| 500
| Specifies the time in milliseconds that Cumulus allows after sending a command before it tries to read data on the serial port. According to the specification, 500 ms is the absolute maximum time that the station should take to respond to any command.  For Cumulus 1, the default was 200 milli-seconds, so you might try that too.
|}
 
 
===La Crosse stations===
 
 
 
{{Template:WorkInProgressBanner}} The following table has some gaps to fill in
 
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Shown on Settings page?
!style="width:100px" | File Section
!style="width:150px" | Introduced
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page (mostly in '''Alarm''' column)
!style="width:20px" | Default
!style="width:300px" | Description
|-
| LCMaxWind=X
| Shown only if La Crosse was selected as station type
| [Station]
| 3.12.0
| Depends on release:
* (Version 1.8.8 Build 874 to release 3.11.4) Need to edit manually in file directly
* (Release 3.12.0 onwards) Station Settings &rarr; Common Options &rarr; Advanced Options
| La Crosse max wind speed
| ???
| It is setting for the La Crosse max wind speed, where X is the maximum (before calibrated by any definitions in Offsets) wind speed in m/s that you want to allow. The value you supply should be in metres/second, regardless of what wind unit you are using in Cumulus
|}
 
It is assumed that [[Cumulus.ini_(Cumulus_1)#La_Crosse_specific:|most parameters remain same]]
 
===WM918/WMR928 Settings===
 
Oregon Scientific specific
 
{{Template:WorkInProgressBanner}} This table has not been populated yet
 
* Introduced for legacy Cumulus
* File Section is [Station]
 
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-
|style="background:lightgray;"|[Station]
|
|
|style="background:lightgray;"|Section name - the following parameters appear in Station section
|-
|Humidity98Fix=0
|
|0 (disable)
|Applies to weather station types that never report more than 98% relative humidity.
*0 = Disabled (default)
*1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98%.  Normally only useful for Oregon Scientific stations.
|-
|LogExtraSensors=0
|
|0 (disable)
|This setting determines whether MX looks for readings from extra temperature probes etc.
*0=Disabled (default)
*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors..
|-
|WMR928TempChannel=N
|
|(no default)
|for WMR-928 stations (and other serial stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
|-
|WMR200TempChannel=N
|
|(no default)
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
|}
 
==Units, Derivative Options,  and Decimal Places==
 
For altitude units, please see [[#Location]].
 
* File Section is [Station]
* Edit on Station Settings page (except where indicated in bold as another page)
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Introduced
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:300px" | Description
|-
| AirQualityDecimals=1
| Release 3.9.2
| Units &rarr; Advanced Options (Here be dragons!)
| Air Quality decimals
| 1  (displayed as blank)
| Number of decimal places for all outputs
|-
| AvgBearingMinutes=10
| Legacy Cumulus
| Common Options &rarr; Advanced Options (Here be dragons!)
| Average Bearing Minutes
| 10 (minutes)
| This parameter's value is the number of minutes over which Cumulus calculates (by treating the wind as a vector and taking into account the speed as well as direction) its average bearing
|-
| AvgSpeedMinutes=10
| Legacy Cumulus
| Common Options &rarr; Advanced Options (Here be dragons!)
| Average Speed Minutes
| 10 (minutes)
| This parameter's value is the number of minutes over which Cumulus averages out reported current wind speeds
|-
| CalculatedDP=0
| Legacy Cumulus
| Common Options
| Calculate dew point
| Unticked (shown as 0 in Cumulus.ini)
| Simple tick or not:
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate dew point from temperature and humidity supplied by station
* Don't tick (value shown as 0 in Cumulus.ini) action depends on '''Calibration settings'''
** If Cumulus has non-default multiplier and/or offset settings for temperature or humidity, Cumulus will calculate dew-point. This avoids the restriction in the Oregon Scientific stations where the dew point can never be below freezing point.
** If station provides dew point, then that will be used provided no multiplier/offsets have been specified for temperature or humidity
|-
| CalculatedWC=1
| Legacy Cumulus
| Common Options
| Calculate wind chill
| Unticked (shown as 0 in Cumulus.ini)
| Simple tick or not:
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate wind chill from temperature and wind speed
** Note that there is a maximum temperature, and minimum wind speed, for Cumulus to make the calculation, see [[Wind_chill]] page
* Don't tick (value shown as 0 in Cumulus.ini) action depends on '''Calibration settings'''
** If Cumulus has non-default multiplier and/or offset settings for temperature or wind speed, Cumulus will calculate wind chill
** If station provides wind chill, then that will be used provided no multiplier/offsets have been specified for temperature or wind speed
Note that some stations (Fine Offset, for example), do not make a wind chill value available to Cumulus. For these, Cumulus always calculates it.
|-
| ChillHourSeasonStart=
| Legacy Cumulus
| (TO BE DETERMINED)
|
| Default depends on release
* (up to 3.11.4) 10 = October
* (from 3.12.0) 4 in Southern hemisphere, 10 in Northern hemisphere
| The value to enter is the month number (1=January, 12=December) and the Cumulative Chill Hours Count is reset to zero on the first of the selected month
|-
| ChillHourThreshold=
| Legacy Cumulus
| (TO BE DETERMINED)
|
| Default depends on Temperature Units
* Either 45 degrees Fahrenheit (equivalent to 7.22 <sup>o</sup>Celsius)
* Or 7 degrees Celsius (equivalent to 44.6 <sup>o</sup>Fahrenheit)
| Chill Hours are incremented by the number of (fractional) hours that the air temperature is below the threshold. In practice, Cumulus simply detects if the current temperature is below the threshold and adds an increment equivalent to the (interval) time passed since the last temperature reading.
* You can put in any value you want, with a decimal place if required
* Some people have put in the freezing-point temperature (0<sup>o</sup>C or 32 <sup>o</sup>F) and they relabel "chill hours" to "frost hours"
|-
| CloudBaseInFeet=0
| Legacy Cumulus
| (As at 3.11.4, can only adjust in the file)
|
| 0 (default in MX is metres)
| Select units used for reporting theoretical cloud base:
* 0 = metres (default if file created by MX)
* 1 = feet (default if file created by legacy software)
|-
| ErrorLogSpikeRemoval=1
| Legacy Cumulus
| '''Calibration Settings''' &rarr; Final tick box
| Log spike and limit violations to error log
| 1 (default in MX is enabled)
| Log spike and limit violations to error log (in MX this is in [[MXdiags folder]]):
* 1 = do log (default if file created by MX)
* 0 = don't log (default if file created by legacy software)
|-
| HourlyForecast=1
| Legacy Cumulus
| Forecast
| Update forecast hourly
| 1 (default in MX is enabled)
| When Cumulus derives its Zambretti forecast
 
Simple tick or not:
* Tick (value shown as 1 in Cumulus.ini) then MX will derive a Zambretti forecast just once an hour, on the hour
* Don't tick (value shown as 0 in Cumulus.ini) to derive a forecast every time MX does a process of the pressure reading
|-
| Humidity98Fix=0
| Legacy Cumulus
| (TO BE DETERMINED)
| n/a
| 0 (disable)
| For any weather station that never reports a relative humidity greater than 98%
 
Simple tick or not:
* Tick (value shown as 1 in Cumulus.ini) then if weather station reading is 98%, process that as 100% for all outputs from MX
* Don't tick (value shown as 0 in Cumulus.ini) to always report what weather station reports for relative humidity
|-
| PeakGustMinutes=10
| Legacy Cumulus
| Common Options &rarr; Advanced Options (Here be dragons!)
| Peak wind gust time
| 10 (minutes)
| MX waits until a gust has been measured for number of minutes specified by value of parameter, before checking whether previous gust extreme record have been exceeded
|-
| PressDecimals=1
| Release 3.9.2
| Units &rarr; Advanced Options (Here be dragons!)
| Pressure decimals
| Default depends on Pressure Units  (displayed as blank)
* default is 1 if units are hPa or mb
* default is 2 if units are inches of mercury
| Number of decimal places for all outputs
|-
| PressureUnit=1
| Legacy Cumulus
| Units
| Pressure
| Depends on release:
# Legacy to 3.11.4: 0 (mbar)
# 3.12.0 onwards: 1 (hPa)
 
| Drop-down:
* 0 = millibar (mb)
* 1 = hectoPascals (hPa)
* 2 = inches of mercury (in Hg)
|-
| RainDayThreshold=
| Legacy Cumulus
| (TO BE DETERMINED)
| n/a
| (TO BE DETERMINED)
| For derivatives like count of consecutive wet/dry days, any daily rainfall less than this threshold will be ignored.
 
(If rainfall is measured in tips, usually set to just over one tip, as first tip of day might be result of less that one tip accumulated on earlier days or because of dew)
|-
| RainDecimals=1
| Release 3.9.2
| Units &rarr; Advanced Options (Here be dragons!)
| Rainfall decimals
| Default depends on Rainfall Units  (displayed as blank)
* default is 1 if units are millimetres
* default is 2 if units are inches
| Number of decimal places for all outputs
|-
| RainSeasonStart=1
| Legacy Cumulus
| Annual Rainfall
| Start of rainfall season
| 1 (Jan)
| Drop-down
* 1 = January
* 2 = February
* 3 = March
...
* 9 = September
* 10 = October
* 11 = November
* 12 = December
 
Added in late 2010 because Cumulus users in Israel said they do not total rainfall from January.
 
It was welcomed by people outside Israel, it turned out growers are often interested in a growing season rainfall total
|-
| RainUnit=0
| Legacy Cumulus
| Units
| Rain
| 0 (mm)
| Drop-down:
* 0 = millimetres
* 1 = inches
|-
| RoundWindSpeed=0
| Legacy Cumulus
| Common Options
| Rounding of wind speed
| 0 (no)
| Simple tick or not:
* Tick (value shown as 1 in Cumulus.ini) then MX will round all the wind speeds it reports to nearest integer
* Don't tick (value shown as 0 in Cumulus.ini) then MX will report wind speeds to the precision defined in "WindSpeedDecimals" parameter
|-
| SunshineHrsDecimals=2
| Release 3.8.0
| Units &rarr; Advanced Options (Here be dragons!)
| Sunshine hours decimals
| 2 (displayed as blank)
| Select a number of decimal places to overwrite the default
|-
| TempDecimals=1
| Release 3.9.2
| Units &rarr; Advanced Options (Here be dragons!)
| Temperature decimals
| 1 (displayed as blank)
| Select a number of decimal places to overwrite the default
|-
| TempUnit=0
| Legacy Cumulus
| Units
| Temperature
| 0 (<sup>o</sup>C
| Drop-down:
* 0 = Celsius
* 1 = Fahrenheit
|-
| UseCumulusForecast=0
| Legacy Cumulus
| Forecast
| Use Cumulus Forecast
| 0 (disabled)
| Simple tick or not:
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will generate a simple weather Zambretti forecast, if your station does not supply a forecast, or as an alternative to the one supplied by your station. Please see [[Forecast_webtag]] for details.
* Don't tick (value shown as 0 in Cumulus.ini) then MX will not do any forecasting, so it will return "not available" unless your weather station provides an alternative forecast
|-
| UseCumulusPresstrendstr=0
| Legacy Cumulus
| Common Options
| Cumulus pressure trend names  
| 0 (depends on weather station type)
| Simple tick or not:  
* Tick (value shown as 1 in Cumulus.ini) then MX will generate the name for the current pressure trend, e.g. "Falling", "Rising quickly" etc, instead of the one supplied by your station. The names used are those in the UK Shipping Forecast, but can be modified using [[strings.ini]].
* Don't tick (value shown as 0 in Cumulus.ini) then effect depends on whether your weather station supplies pressure trends
** If your station does supply pressure trends, then MX will use those
** If your station does not supply pressure trends, then MX will generate the name for the current pressure trend, e.g. "Falling", "Rising quickly" etc, instead of the one supplied by your station. The names used are those in the UK Shipping Forecast, but can be modified using [[strings.ini]].
|-
| UseSpeedForAvgCalc=0
| Legacy Cumulus
| Common Options
| Use speed for average calculation
| 0 (disable)
| Simple tick or not:  
* Tick (value shown as 1 in Cumulus.ini) then MX will use what the weather station supplies as "wind speed" to calculate the average wind speed.
* Don't tick (value shown as 0 in Cumulus.ini) then MX will use what the weather station supplies as "latest wind speed" to calculate the average wind speed
Please see [[Wind_measurement#Weather_Stations_and_Cumulus]] for more details.
|-
| UseZeroBearing=1
| Legacy Software
| Common Options
| Use bearing zero when calm
| 1 (enable)
| Simple tick or not:  
* Tick (value shown as 1 in Cumulus.ini) then MX will report a wind bearing of zero when the wind is calm
* Don't tick (value shown as 0 in Cumulus.ini) then MX will continue to report the last wind bearing when the wind stops blowing
|-
| UVDecimals=1
| Release 3.9.2
| Units &rarr; Advanced Options (Here be dragons!)
| Ultra Violet decimals
| 1 (displayed as blank)
| Select a number of decimal places to overwrite the default
|-
|-
| Wind10MinAverage=0
| Wind10MinAverage=0
Line 4,822: Line 3,452:
| Select a number of decimal places to overwrite the default
| Select a number of decimal places to overwrite the default
|-
|-
| WindSpeedAvgDecimals=1
| WindSpeedAvgDecimals=
| Release 3.8.3
| Release 3.8.3
| Units &rarr; Advanced Options (Here be dragons!)
| Units &rarr; Advanced Options (Here be dragons!)
| Wind speed average decimals
| Wind speed average decimals
| 1 (displayed as blank)
| (displayed as blank)
| Select a number of decimal places to overwrite the default
| Select a number of decimal places to overwrite the default. (NOTE: If the weather station does not provide an average wind speed, or if the user requires a change of units from how the weather station reports it,  then CMX will calculate it to 1 decimal place by default; otherwise average wind speed will default to integer, or to one decimal place, depending how it is provided by the station).
|-
|-
| WindSpeedDecimals=2
| WindSpeedDecimals=
| Release 3.8.3
| Release 3.8.3
| Units &rarr; Advanced Options (Here be dragons!)
| Units &rarr; Advanced Options (Here be dragons!)
| Wind speed average decimals
| Wind speed average decimals
| 2 (displayed as blank)
| (displayed as blank)
| Select a number of decimal places to overwrite the default
| Select a number of decimal places to overwrite the default which depends both on the weather station type and what units have been selected by user (speeds are normally reported as integers unless metres per second are reporting unit, because most sensors are not precise enough to give any decimal places in other units)
|-
|-
| WindUnit=0
| WindUnit=0
Line 4,862: Line 3,492:
| (displayed as blank)
| (displayed as blank)
| Enter a 4 digit year:
| Enter a 4 digit year:
* Legacy Releases (1.7.12 5 July 2008) and MX up to 3.11.4 (build 3133 25 May 2021): The year-to-date amount in previous parameter is added to the current (seasonal) rain if the year specified in this parameter matches the current year.  
* Legacy Releases (1.7.12 from 5 July 2008) and MX up to 3.11.4 (build 3133 from 25 May 2021): The year-to-date amount in previous parameter is added to the current (seasonal) rain if the year specified in this parameter matches the current year.  
** If your rain season starts in January (default) then set this to the calendar year when you first use Cumulus (in a particular location).   
** If your rain season starts in January (default) then set this to the calendar year when you first use Cumulus (in a particular location).   
** If your rain year starts in any other month, set this to this year if your first season starts this year, and set this to last year if your second season has started and you don't want the previous value added to your second season
** If your rain year starts in any other month, set this to the current calendar year during your first season (remember to change the year mid-season when reach 1 January), and delete the year when your second season starts as you don't want the previous value added to your second season
* From Release 3.12.0 (?? July 2021), the current calendar year is compared against  (current month - season start month + 1) year, so you enter the year in which your first season starts (be that last calendar year or this calendar year)
* From Release 3.12.0 (29 July 2021), the current calendar year is compared against  (current month - season start month + 1) year, so you enter the year in which your first season would start had it been a full season (be that last calendar year or this calendar year)
|}
|}

Latest revision as of 05:39, 13 September 2022

Please note this page was created 13 June 2021.

At last update, it shows position as at beta build 3135, (missing some changes for the 3.12.0 release build of 3141).

This new page was created to reflect parameters added to Cumulus.ini in releases 3.8.0, 3.9.2, 3.10.0, and 3.12.0 (early beta builds - June 2021). It excludes all parameters removed after release 3.7.0.


Crystal Clear info.png This document is 'Work In Progress' so content may not be complete.

Request for help from Wiki Readers

  • Do you understand how MX works?
  • Do you use hardware, or MX functionality, that is not yet documented? Can you begin that documenting?
  • Can you contribute simple text for novice users, examples of what you have done, correction of typing or factual errors, or supply missing details?
  • Will you make this page more useful by bringing content up-to-date as new releases change some information written for older releases?
  • Does any page need a section for novices, so they don't need to read more technical information further down that page?
  • Is there some information on this page, that should be on a separate page? Can you create the new page and move the less relevant information off this page, don't forget this page needs a link to the new page so people who expect to find it here know where it has moved to?

If you plan on contributing to the Wiki, then you will need an account.

  • Please use the Request Account form to apply for an account. Note that the Wiki is currently undergoing restructuring and is largely locked for editing, but please apply for an account if you wish to contribute in the future.
  • You will find help on how to contribute to this wiki at How to Edit.
  • If you need to consult others, please use the Cumulus Wiki suggestions forum.

Please be aware that information on this page may be incorrect.

Since this page describes a file whose content frequently changes, this page may be out of date, unless somebody bothers to update it for every change.

Purpose of Cumulus.ini file

This is a text file containing initialization parameters. Cumulus Version MX SpecificThis page covers those used by the Cumulus MX software applica3.2.0 to 3.5.4tion.

For MX there can only to be one Cumulus.ini file, and it must be stored in the same folder as the executable "CumulusMX.exe".

The configuration settings in Cumulus.ini have the following main purposes (this list may be incomplete):

  • Identify which weather station type MX is to read, and settings related to that model
  • Identify which derivatives are source ones (read directly from weather station and converted to your preferred units) and which derivatives MX is to calculate for you.
  • Identify where you want MX to output to (options include external web sites, and database tables)
  • Control what is output to those destinations, to the extent that each can be configured


Why does this Wiki now contain multiple pages describing "Cumulus.ini"?

MX has been developed very dramatically by Mark Crossley:

  1. There were minor differences between the legacy cumulus.ini (for versions 1.x.y, ending with 1.9.4) with documentation now here and the original 3.0.0 beta (previously documented on Cumulus.ini (Beta) page, but that page has been cleared)
  2. The dramatic development of MX produced considerable differences between that original MX beta, and the configuration that applied up to 3.7.0, as now documented here
  3. Even more dramatic changes to the MX configuration have been happening since 3.8.0, with the biggest changes at 3.9.2, 3.10.0, and 3.12.0; therefore, the decision was taken to abandon maintaining the page previously called "Cumulus.ini", and start again with a brand new empty page!


All the pages, previously called "Cumulus.ini", can be found from the owning category. The original page was preserved at Cumulus.ini_(preserving_history) so look there for its editing history. That page also expands on the above summary of why that old page was replaced.

You will also note that this page does not cover all settings in detail, and find some links to further pages within some sections below

Need to install MX 3.12.0

If you are using Cumulus 1 or a release of MX earlier than 3.12.0, be aware that the content of "Cumulus.ini" is totally different to the file for later MX releases. (It might have been better had the file been given a new name in release 3.12.0).

The way the developer decided to implement it, is that when somebody installs release 3.12.0, any existing "Cumulus.ini" file is renamed, and a new "Cumulus.ini" file is created from scratch, and from then onwards all changes apply to the new file. As 3.12.0 is the only release that can create the replacement file, it is highly recommended that anybody currently using an older release, downloads 3.12.0 from here and runs that release for a while before upgrading to the latest release here.

Simplifications

The MX configuration is very different to that used by the legacy software. MX has far more optional functionality than the legacy software, therefore MX requires far more parameters to tailor all these functionality options.

The file is read into Internal Variables as Cumulus starts, and those variables are written back into the file when any settings are changed.

In the MX releases covered by this Wiki page, almost all settings are edited from a number of web pages for settings included in the local web interface.

To make it easier for the Cumulus MX user, the developer had to devise a way to make it easier to quickly assign the settings that might be best for those new to Cumulus to get the software working without needing to understand all the settings. This is achieved by introducing some "master" settings, these both determine which dependent settings are displayed, and what default values those dependent settings take. So a novice just has to get the "master" settings right and they then achieve a typical way of using that functionality! For those who are slightly more expert, full flexibility is available by adjusting the majority of dependent settings to what is required for more specialised requirements.

The ongoing development of MX is focused on making configuration even simpler, by revising the pages for the setting of all parameters, and improving the labels/grouping. By moving away from legacy software terminology and the parameters it needed; the developer has started introducing parameters and labelling that fits the MX design.

It may be worth remembering why the legacy software made life complicated:

  1. There could be more than one "cumulus.ini" file for the Legacy Cumulus up to 1.9.4, as explained here.
  2. The vast majority of parameters (that could appear in the file) could only be edited directly in the file.
    • To simplify the editing in-situ, the author (Steve Loft) recommended that, within any "File section" you intended to change, you sorted the parameters into alphabetical order, before editing the file.
    • That advice was given because having parameters in alphabetical order would prevent you inserting a parameter that already existed.
    • This would avoid the potential problem arising from the design that Cumulus 1 would ignore any duplicate parameter; (Cumulus would take the first one it found, and that might not be the last one you edited!)

Structure of Cumulus.ini

The file is divided into "File sections" (see terminology definitions below), each File section name is on a separate line (with no other content) and enclosed in square brackets (e.g. [Station]).

These File sections can appear in any order, by default new File sections are appended after all previous File sections, but if you prefer the File sections in another order, MX can still find them, although it may spend more time searching!

Within each File section, there are parameters. Each parameter is in format Attribute=Value, and appears on a line to itself.

The parameters, within a File section, can be in any order, by default new parameters are appended at end of the relevant File section.

How this Wiki page classifies settings

This new Wiki page is no longer designed around the way parameters appear in the file, as earlier pages with this name were. Here are some of the reasons:

  1. Settings can appear in any order in the file, but it is easier to find them on this page if they are listed alphabetically
  2. Releases might add new parameters, or remove old parameters, so looking at a file does not identify which parameters need to be explained on this page
  3. Releases might add new sections in the file, or remove old sections in the file, so organising this page by those "File sections" no longer makes sense
  4. The settings interface in MX is being comprehensively redesigned. That means this documentation cannot be organised by the way MX organises its settings pages.
    • To clarify that reason, if this Wiki page was organised according to the Settings Screens that applied say at release 3.8.0, a different sequence might be required in say 3.12.0 because that changed the Settings Screens.

Some classification is still needed to help you the reader find settings, only you can judge whether the grouping here suits you! In creating this page, I have tried to think of a way to group various settings and arranged those groups alphabetically, to make navigation as easy as I can.

Of course if you have your own ideas of a better way to group the documentation here, you are welcome to implement your preference, by editing this page.

Tabular presentation

Within the groupings I have selected, individual settings are normally presented as rows in tables for clarity on this Wiki page. The individual tables can have up to 7 columns. The columns can explain for each setting:

  • Where in the admin interface you edit it (MX page and MX section in terminology below)
  • Whether the Setting is always shown on the Settings Page ("Always" is shown), or is only shown if an earlier Setting has a particular selection (dependency is shown)
  • What File Section (in terminology below) it appears in with the file (always appears, and is shown, between square brackets)
  • The attribute name used for the parameter in the file (always shown with an equals sign after it)
  • Which release introduced the setting(s)
  • What is the default value for the parameter, (and what that default value means)
  • A description of what the parameter represents, and what values it can take

If the content of any column would be same for every row, then that column is omitted, and the relevant information is instead stated before the table.

Exceptions to above table styling:

  1. MQTT parameters are handled slightly differently, as they did not fit that standard layout
  2. The mean temperatures, and normal rainfall figures, with one parameter per month, have been presented as text, rather than a table for simplicity
  3. For the Extra Web Files Settings page, where the settings page uses editable grid software, instead of listing all 800 settings individually, the table here is split into just 8 rows, each of which applies to 100 parameters in the file.


Terminology used on this Wiki Page

Terminology What it means
Qualifications:
  • Settings page
  • Wiki page
Because "page" could refer to either this page or the Settings page, page will always be qualified
Shown on Settings page? Sometimes whether you see a particular setting on the Settings Page, depends on a previous selection has been made, that is explained under this heading
MX Section Under this heading you will find how to navigate to the relevant setting within the admin interface. This covers the page where you edit the setting, followed by →, and then the section (and sub-section where relevant) that you have to select to see the setting

Each MX section on the Settings page has to be opened individually (by either a button for maximum accessibility, or a Click ▶to expand, click ▼ to collapse for alternative styling).

Label on Settings page Under this heading you will discover how MX labels the individual setting where you edit that setting
File Section Within the file, a number of section headings are used, to gather multiple parameters together. Thus under this heading, for each setting, the table shows the File Section where the parameter will be stored
Parameter Line Entry Within the file each setting is represented by a parameter in format attribute=value on a line to itself without any punctuation symbols. If the parameter has a default value, that is shown here and explained in next column
Default This is the value (if any) that the individual setting takes when it has not been amended. Some parameters do not have a default value and "(none)" will be shown in this case. No brackets surround literal text representing default value, which is normally also seen in Parameter Line Entry. In general, round brackets are used in Default column to indicate an explanation.
Description Under this heading you will find an explanation of the setting including (where relevant) what values it can take

When, and How, does MX read the Configuration File?

Whenever MX is restarted, it reads the latest Cumulus.ini and if it exists strings.ini (briefly mentioned below); from these one (or two) file(s), it learns the configuration that you want it to use.

Essentially, MX reads the whole file, for each attribute part of a parameter in the file, there is a variable stored within the MX code. So the value part of each parameter is assigned to the respective variable. Hence MX will not permit any duplicates for any parameter. If MX finds a parameter it does not understand, it ignores that parameter.

This means a Cumulus.ini file created by the legacy software, or by an old release of MX, can still be read by the current release of MX, as it just ignores all the obsolete parameters. However, since MX now has a lot of new parameters in the file, that were not in the legacy file, nor in a file created by an early MX release, it is often easier to start again with a new configuration file, as explained later, to ensure the configuration of MX is correct for you.

MX also creates a backup copy of "Cumulus.ini" in a sub-folder of Backup folder that is named according to current date and time.

What MX finds in your "Cumulus.ini" does of course determine what you see when you open any of the Settings pages, in the admin interface. This is because the displaying of some settings is dependent on another setting.

For completeness I mention here, configuration information for MX can also be stored in an optional file strings.ini, that is used to identify how various standard output phrases are to be modified to suit you.

Settings Configuration for MX

The MX software offers much functionality and flexibility. Consequently, it has an extensive set of configuration settings, fortunately apart from the initial settings of model and units (see next sub-section), recent releases have simplified many of the settings for optional features by providing particular selections to affect a whole range of others (for predicted uses), instead of forcing you to individually work through every individual setting.

Please see First Run of MX for how to set up settings when you first use MX.

What happens if I upgrade MX?

If you upgrade to a newer MX build, as that release distribution does not contain a "Cumulus.ini", you cannot lose your settings entered in your existing file. However, be aware that a new release may remove some settings, and add new settings, hopefully the release announcement will give specific details. Otherwise, you will need to work through all the Settings Pages, and all the "MX Sections" (see Terminolgy above)

Where do I change settings?

The current design of MX expects that Cumulus Users will never need to edit the "Cumulus.ini" file directly, as there are a number of settings pages in the admin interface and users are expected to use those Settings pages to amend the individual MX settings.

Please see MX_Administrative_Interface#Changing_Settings for basic information, including how to load the admin interface (sometimes called the "dashboard interface" or "user interface").


Furthermore, at the end of each (meteorological) day, MX creates a back-up in the backup/daily/TIME_NAME sub- folder. The TIME_NAME is constructed from a string of digits representing the date and time the directory was created (without any punctuation) e.g. 20060519090000. In that folder, recent MX releases, include a copy of the current "Cumulus.ini" file.

Do I need to restart MX?

If you change a setting directly in the file, you must stop MX beforehand. The setting takes effect when you restart MX.

If you change a setting, using the admin interface, it may, or may not, take effect immediately...

The settings available on the various pages in the admin interface fall into two groups:

  1. SETTINGS THAT TAKE EFFECT IMMEDIATELY ON CLICKING “SAVE”
  2. SETTINGS THAT ONLY TAKE EFFECT WHEN MX IS RESTARTED

There used to be a third group. Before Release 3.11.2 - build 3131 a few changes made in the interface were not saved into "Cumulus.ini", and those few settings were therefore lost when MX was restarted. One example of these former exceptions was that the former action selecting adding extra debugging information to file in MXDiags folder was previously not saved for subsequent session.

For the current MX release, any change made (on any settings page) will be saved into "Cumulus.ini", and will still apply when MX is restarted. That restart will ensure all settings changed in the last session do take effect, even those that did not take effect before the restart.

Unfortunately, there is no documentation available from developer on which settings, at any release, do not take effect until MX is restarted. We do know that you need to do a restart after choosing the station model, and that is unlikely to change.

In early MX releases most configuration settings required a restart of MX before they took effect, but since then in some releases, certain settings that used to require a restart have been changed so they take effect intermediately. It is anticipated, as MX develops, the majority of settings will become ones that take effect without a restart of MX.

This means that any attempt to document here which changes do require a restart of MX is working against a moving target. Consequently, this documentation does not indicate where a restart is required. You can either play safe, and restart MX each time you finish making edits to settings, or you can read all the support forum announcements, and see if you can find any information about whether a restart is needed, for whatever particular settings you are changing, at the release you are using.


How to Remove Redundant parameters from file

If you have been using Cumulus for a while, there might be parameters that are now obsolete left in your configuration file.

MX will ignore any parameters that it no longer recognises, but there is a simple way to make MX create a new file for you, keeping your existing settings, but ensuring the new file does not have any obsolete parameters.

The following procedure is best done after, not before, you upgrade MX, as installing a new release might add/remove parameters to/from "Cumulus.ini".

Apart from that upgrade consideration, you can start afresh with a new file anytime by following this very simple procedure:

You must do this while keeping Cumulus MX running (to preserve existing settings)...

  1. Rename your existing Cumulus.ini to say Cumulus.ini.sav (this keeps the file, but stops MX finding it)
  2. In Cumulus go to one of the settings screens, (e.g. Program Settings which is currently a short page) – simply click ‘’’Save Settings’’ (i.e. any action that makes MX save settings to its configuration file)
    • It is possible this might highlight a new parameter that does not yet have a valid value (e.g. the Alarm settings page, which uses ‘’’Enable Alarms’’’ rather than "Save settings", got extra settings without defaults at 3.11.0).
  3. Cumulus (if it accepts that save) will now create a brand new Cumulus.ini file,
  4. This will have all the settings you have chosen
  5. They will now be in the order MX is expecting
    • MX default sort order is from where entries are set in the code, and that is far from alphabetic!
  6. As MX is unaware of settings it used previously, but does not use now, (and MX is unaware of what settings the legacy software used), it won’t write back any redundant settings in the new configuration file.

As well as changing the order in which parameters are stored, this re-generation may show up other changes (if you do have reason to examine the new file and compare with the old file):

  • A major change is likely in the '''[Station]''' section as that has seen a lot of changes as MX is developed.
  • The ’’’[Graphs]]’’’ section has also seen a number of changes as MX has developed.
  • The most dramatic change may happen in '''[FTP Site]''' as any reorganisations to the list of parameters for Extra Web Files are reproduced 100 times.

Editing the file directly

At the time of writing this, the work to code up MX settings pages is not yet completed.

So the Settings Pages could not modify all the parameters, that can appear in the file and get used by MX. Therefore, there were still some settings that could only be amended by stopping MX, then editing the relevant parameter in the file directly, before restarting MX.

However, it is likely that in a few releases time, there will be no necessity to directly edit the file.

That said, working through the various settings pages, and all the options (often within multiple MX sections) can be laborious. Consequently, those with some understanding of the file contents may still wish to make some changes with MX stopped, by editing the file. The only caution that needs to be stressed is "be careful"; as this editing the file directly bypasses any validation that is done when using the Settings Pages, and so might result in an inconsistent set of parameters, and (in the worse case) perhaps a software crash.

An example of why you might edit file instead of using Settings Page

If (for example) you find the Extra Web Files editor hard to use, you might decide to stop Cumulus MX and still edit this configuration file directly for changes to those parameters. Given that MX ignores any parameter it does not understand, while editing the file, you can temporary have old and new parameters in the file. All you need to do is prefix those parameters you don't want MX to use with any character you like before the "Extra" in the attribute name.

When MX adds new parameters to file

In theory, there is no reason why you should manually add any extra parameters directly into the file.

Since MX creates, and edits, the file, it should ensure all parameters it understands are in the file.

When this new page was being created, some of the parameters in the file that MX understands, could not be matched to any known setting in the Settings Interface pages, but it may be a future release will correct that.

If a new release of MX adds new parameters, then:

  • If the new parameter has a valid default value, MX will work perfectly using that default value.
    • You won't need to know the parameter exists, unless you decide to change it, and find out what values it can take either in a drop-down on the relevant Settings page, or in the relevant table below.
  • Other new parameters may be given an initial illegal value, because MX cannot guess what value will work for you.
    • This is to enforce the need to give these parameter a valid value before MX will allow you to save settings.
      • Sometimes, MX will not do any weather data processing, until these ‘’’missing’’’ values are edited.
      • In other cases, you might not realise that your file is missing one or more parameters, unless you go into the relevant Settings page, and find you can't save (Enable for Alarms page).

In practice, as already mentioned, there might be a parameter that you need to get MX working correctly for you, but have to add directly to the file as (at the release you are using) that setting has not yet been added to any Settings page.

Before this page actually lists all the settings I know of, let me give an example of a seting with a valid default, and an example of a setting that has an invalid default:

Example of new Parameter with valid default

When accessibility was added, its parameter defaulted to the old expand/contract sections design (see first table below).

You can, optionally, go into "Program Settings" or "Station Settings" pages, where you tick the box to get the (more accessibility friendly) selection button alternative.

Example of new Parameters with no valid initial value

As a specific example, release 3.11.0 added emailing capability; that requires quite a lot of new parameters to be added to the file. You could use MX without these new parameters, but the Alarm Settings page would not allow you to click Enable until you had defined various settings on another Settings page, as well as on this Alarm Settings page.

Tables listing Settings

Accessibility

  • Introduced Release 3.10.0 - build 3115
  • File Section is [Program]
Parameter Line Entry MX Section Label on Settings page Default Description
EnableAccessibility=0 Two places where you can edit this setting:
  • (Either) Program Settings → (First tick box)
  • (Or) Station Settings → (First tick box)
Enable accessibility features 0 (disable) Determines styling of settings pages:
  • Set to 1 to make this (and other pages) appear in a button selection style (more friendly on an accessibility basis).
  • Leave it at zero for a Click ▶to expand, click ▼ to collapse styling.

Alarms (and emails)

The Alarm settings seem to frequently be changed by new MX releases, so have been moved to a separate wiki page where hopefully it will be easier for somebody to keep the content updated in future.

Charts

Crystal Clear info.png This document is 'Work In Progress' so content may not be complete.

Request for help from Wiki Readers

  • Do you understand how MX works?
  • Do you use hardware, or MX functionality, that is not yet documented? Can you begin that documenting?
  • Can you contribute simple text for novice users, examples of what you have done, correction of typing or factual errors, or supply missing details?
  • Will you make this page more useful by bringing content up-to-date as new releases change some information written for older releases?
  • Does any page need a section for novices, so they don't need to read more technical information further down that page?
  • Is there some information on this page, that should be on a separate page? Can you create the new page and move the less relevant information off this page, don't forget this page needs a link to the new page so people who expect to find it here know where it has moved to?

If you plan on contributing to the Wiki, then you will need an account.

  • Please use the Request Account form to apply for an account. Note that the Wiki is currently undergoing restructuring and is largely locked for editing, but please apply for an account if you wish to contribute in the future.
  • You will find help on how to contribute to this wiki at How to Edit.
  • If you need to consult others, please use the Cumulus Wiki suggestions forum.

Please be aware that information on this page may be incorrect.

Charts have evolved rapidly in MX development, this table needs verification by somebody who uses the functionality documented here. Can you be the contributor to bring it up to date?

Parameter Line Entry File Section Introduced MX Section Label on Settings page Default Description
GraphHours=24 [Graphs] Legacy Cumulus Station Settings → Graphs Graph hours 24 (2 rolling days worth of values) For those plots that show values (if available) minute by minute, how many days back to go. Some people prefer to set this to 48 or 96, that means uploading a lot more data in the .json files, but it shows more on charts
AppTempVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Apparent temperature Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Australian Apparent Temperature plotted on Charts
BaseTemperature1= [GrowingDD] and [TempSum] Release 3.11.0 - b3129 Station Settings → Growing Degree Days Base temperature #1 Depends on selected temperature units (not quite same)
  • (Celsius) 5 (equivalent to 41 oFahrenheit)
  • (Fahrenheit) 40 (equivalent to 4.44 oCelsius)
Base temperature for series 1
BaseTemperature2= [GrowingDD] and [TempSum] Release 3.11.0 - b3129 Station Settings → Growing Degree Days Base temperature #1 Depends on selected temperature units (equivalent)
  • (Celsius) 10
  • (Fahrenheit) 50
Base temperature for series 2
Cap30C=1 [GrowingDD] Release3.11.0 - b3129 Station Settings → Growing Degree Days Cap GDD at 30°C / 86°F Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want growing degree days capped and not incremented at high temperatures (threshold shown in setting name)
ChartMaxDays=31 [Graphs] Legacy Cumulus Station Settings → Graphs Graph Days 31 (daily values) For those plots that show recent daily values, this states how many of them to plot
Colour0=#058DC7, Colour1=#50B432, Colour2=#ED561B, Colour3=#DDDF00, Colour4=#24CBE5, and Colour5=#64E572 [Select-a-Chart] Release 3.9.7 - b3107 ??? ??? Hex colours as shown in parameter list Colour of line used for plotting the respective series
DailyAvgTempVisible=1 [Graphs] Release 3.11.0 - b3129 Station Settings → Graphs → Visibility → Temperature Data Daily Average Temperature Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Daily (integrated) Average temperature plotted on Charts
DailyMaxTempVisible=1 [Graphs] Release 3.11.0 - b3129 Station Settings → Graphs → Visibility → Temperature Data Daily Maximum Temperature Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Daily Maximum temperature plotted on Charts
DailyMinTempVisible=1 [Graphs] Release 3.11.0 - b3129 Station Settings → Graphs → Visibility → Temperature Data Daily Minimum Temperature Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Daily Minimum temperature plotted on Charts
DPVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Dew Point plotted on Charts
FeelsLikeVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Feels Like Temperature plotted on Charts
GrowingDegreeDaysVisible1=1 [Graphs] Release3.11.0 - b3129 Station Settings → Graphs → Visibility → Degree Days Growing Degree Days series #1 Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see series 1 plotted on Charts
GrowingDegreeDaysVisible2=1 [Graphs] Release3.11.0 - b3129 Station Settings → Graphs → Visibility → Degree Days Growing Degree Days series #2 Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see series 2 plotted on Charts
HIVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see USA Heat Index plotted on Charts
HumidexVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Canadian Humidity Index plotted on Charts
InHumVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Humidity Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Indoor Relative Humidity plotted on Charts
InTempVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Indoor Temperature plotted on Charts
OutHumVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Humidity Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Outdoor Relative Humidity plotted on Charts
Series0= to Series5= [Select-a-Chart] Release 3.9.7 - b3107 ??? ??? 0 (disabled) Name of parameter to plot (in series 0 to 5) e.g. "Pressure", "Wind Gust", "Temperature", "Rainfall Rate", "Wind Bearing"
SolarVisible=1 [Graphs] MX release 3.10.0 Station Settings → Graphs → Visibility → Solar Data UV Index Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Solar radiation plotted on Charts
SunshineVisible=1 [Graphs] MX release 3.10.0 Station Settings → Graphs → Visibility → Solar Data UV Index Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Sunshine Hours plotted on Charts
TempSumVisible0=1 [TempSum] Release 3.11.0 - b3129 Station Settings → Annual Temperature Sum Annual Temperature Sum 0 Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Annual Temperature Sum series 0 plotted on Charts
TempSumVisible1=1 [TempSum] Release 3.11.0 - b3129 Station Settings → Annual Temperature Sum Annual Temperature Sum #1 Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Annual Temperature Sum minus baseline 1 plotted on Charts
TempSumVisible2=1 [TempSum] Release 3.11.0 - b3129 Station Settings → Annual Temperature Sum Annual Temperature Sum #2 Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Annual Temperature Sum minus baseline 2 plotted on Charts
TempSumYearStart= [TempSum] Release 3.11.0 - b3129 Station Settings → Annual Temperature Sum Year summation starting month Depends on hemisphere
  • (Northern hemisphere) 1 = January
  • (Southern hemisphere) 7 = July
Enter as a number the month for which (on first of that month) annual temperature summation is reset to zero
TempVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Outdoor Temperature plotted on Charts
UVVisible=1 [Graphs] MX release 3.10.0 Station Settings → Graphs → Visibility → Solar Data UV Index Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Ultra Violet Index plotted on Charts
WCVisible=1 [Graphs] MX release 3.7.0 - b3089 Station Settings → Graphs → Visibility → Temperature Data Dew point Ticked (shown in Cumulus.ini as 1) Simple tick or not indicating whether you want to see Wind Chill plotted on charts
YearStarts= [GrowingDD] Release 3.11.0 - b3129 Station Settings → Growing Degree Days Growing season starting month Depends on hemisphere
  • (Northern hemisphere) 1 = January
  • (Southern hemisphere) 7 = July
Enter as a number the month for which (on first of that month) Growing degree days is reset to zero

Data Logging

  • Available in all Cumulus releases
  • File Section is [Station]
Parameter Line Entry Shown on Settings page? MX Section Label on Settings page Default Description
DataLogInterval=2 (Always) Station settings → General Settings Log interval 2 (10 minutes) Drop-down:
  • 0 = 1 minute between MX logs into the one to three Monthly_log_files (i.e. Standard log files, and optionally Extra Sensor Files, Air_Link_Log.txt)
  • 1 = 5 minutes between MX logging lines
  • 2 = 10 minutes between MX logging lines
  • 3 = 15 minutes between MX logging lines
  • 4 = 20 minutes between MX logging lines
  • 5 = 30 minutes between MX logging lines
LogExtraSensors=0 (Depends on station type) Only from Release 3.12.0 Station settings → Common Options Extra sensors 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if your weather station can output readings to be logged in Extra Sensor Files
  • Don't tick (value shown as 0 in Cumulus.ini) if you have nothing to log to Extra Sensor Files.
NoSensorCheck=0 (not yet on a settings page) (not known) (not known) 0 (normal) Boolean:
  • 0 = MX will stop if any of the minimum set of sensors listed below fails
  • 1 = MX will continue to run, even if any of the minimum set of sensors listed below fails

Minimum set of sensors:

  1. Current air temperature
  2. Current Relative Humidity
  3. At least one wind speed
  4. Current air pressure (absolute or sea-level)

Cumulus will stop processing any information from a weather station unless the above 4 source values are being supplied and reveal they are being updated (failure is set is after a total of 6 unsuccessful consecutive attempts to read each of these).

RainDayThreshold=-1 (with warning: "Here be dragons!") Depends on release:
  • (3.5.1 to 3.11.4) Manual edit of file
  • (3.12.0 onwards) Station settings → Common Options → Advanced options
Rain day threshold -1 (that represents 0.2 mm or 0.01 inches) The amount of rainfall that must be collected before MX treats today as a wet day

The intention is this will represent more than one tip, as the first tip might contain some rain from an earlier day

RolloverHour=0 (Always) Station settings → Log Rollover Time 0 (midnight) Radio type selection:
  • 0 = MX will do an end of day process when the time (on Weather Station if it provides time) reaches midnight
  • 1 = MX will do an end of day process when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time
SnowDepthHour=0 (with warning: "Here be dragons!") Depends on release:
  • (3.5.1 to 3.11.4) Manual edit of file
  • (3.12.0 onwards) Station settings → Common Options → Advanced options
Snow depth hour 0 (midnight) Spin selector of 0 to 23: Defines hour from which entries in Weather Diary for current calendar day are used. Prior to this hour the weather diary will be searched for Calendar yesterday
StartDate= (with warning: "Here be dragons!") Station Settings → Common Options → Advanced Options Records Began date (Set when you first use Cumulus) Format used is determined by locale used for running MX. If this date is edited, keep to same format. MX generally (see Calculate_Missing_Values#CreateMissing.exe for exceptions) ignores any data file entries prior to this date.
UseDataLogger=1 (probably determined by station type) (not known) (not known) 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if your weather station has its own storage, so MX can do a catch up when it first starts and read any "archive data"
  • Don't tick (value shown as 0 in Cumulus.ini) if your weather station has no storage, and therefore MX cannot capture any readings when it is not running
Use10amInSummer=1 (Always) Station settings → Log Rollover Use 10am in Summer 1 (normal) Tick box:
  • 0 = If "Daylight Saving Time" (DST) applies in Summer,
    • If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
    • If rollover time is 9 a.m., MX is to use 9 am local time, regardless of whether DST is in operation or not
  • 1 = Normal behaviour:
    • If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
    • If MX would do an end of day process when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time, then it waits until 10 a.m. local time while DST is in effect


Debugging

  • Available from beta MX.
  • File Section is [Station]
Parameter Line Entry MX Section Label on Settings page Default Description
Logging=1 Depends on release installed:
  1. Alternatives:
    • (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: Logging = 1, then restart Cumulus MX.
    • (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
  2. (Release 3.9.4 to 3.11.4) Program Settings → Program General Options
  3. (Release 3.12.0 onwards) Program Settings → Logging Options
Debug logging 0 (disabled) This adds extra information about data transfers between your weather station and MX.

It was introduced originally for Davis stations only, but later (can someone insert here the relevant release) extended to cover more stations.

DataLogging=1 Depends on release installed:
  1. Alternatives:
    • (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: DataLogging = 1, then restart Cumulus MX.
    • (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
  2. (Release 3.9.4 to 3.11.4) Program Settings → Program General Options
  3. (Release 3.12.0 onwards) Program Settings → Logging Options
Debug logging 0 (disabled) This adds extra information about both data transfers initiated from MX, and all the internal MX processes.

Extra Web Files

There are 100 occurrences of each parameter in Cumulus.ini, and therefore each parameter has a base name followed by numbers 0 to 99.

The settings interface presents the rows on multiple pages, the rows are not numbered, so you have to do some counting to work out which row in the admin interface page corresponds with which parameter in Cumulus.ini file.

You MUST restart MX after any changes in this section, before the new settings take effect.

Parameter Line Entry Label on Settings page Default Description
[FTP site] Section name
ExtraLocal0= to ExtraLocal99= Local File Name (empty) You can enter:
  • A relative path name, with respect to the "CumulusMX" root folder
  • A full path name for a file on the computer running MX
    • e.g. /home/pi/documents/myFile
    • e.g. C:\Users\Public\Documents\working.txt
  • You can place any of the following special tags into the entry
    • These should be typed as shown on their own
      • <noaayearfile> and <noaamonthfile> these respectively represent latest yearly and latest monthly reports
      • <currentlogfile>, <currentextralogfile>, and <airlinklogfile> these respectively represent standard, extra sensor, and Davis AirLink air quality monitor log files e.g. ExtraLocal3=<currentlogfile>
ExtraRemote0= to ExtraRemote99= Destination Filename (empty) Defines where MX is to upload file to
  • If file transfer is requested (see below), the file path should be expressed starting at the FTP/FTPS/SFTP root
    • I can't tell you what the file path is for your web server, but I can give a couple of examples to steer you
      • e.g. httpdocs/dayfile.txt
      • e.g. public_html/thismonthyear.htm
  • If the FTP is not ticked, the file path should be full path for a file on the computer running MX
    • e.g. /var/www/html/weather/images/moon.png could be destinatation for uploading the MX generated moon image to a Linux hosted server
    • e.g. /var/www/html/weather/webfilesMX/tempdata.json for uploading one of the files with graph data to a Linux hosted server
  • You can place any of the following special tags into the entry
    • These should be typed as shown as part of the destination path, note that they can be used:
      • either to represent the final filename part of the path e.g. ExtraRemote3=/var/www/html/weather/monthly/<currentlogfile>
      • or to modify a filename, so it becomes unique to a particular month e.g. ExtraRemote0=/var/www/html/weather/cumulus_generated/savedFiles/web_tags_real_time_<currentlogfile>.inc
    • <noaayearfile> and <noaamonthfile> these respectively represent latest yearly and latest monthly reports
    • <currentlogfile>, <currentextralogfile>, and <airlinklogfile> these respectively represent standard, extra sensor, and Davis AirLink air quality monitor log files
ExtraProcess0= to ExtraProcess99= Process 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if the local file is a template file, see here for full explanation of Process
  • Don't tick (value shown as 0 in Cumulus.ini) if you want local file uploaded with existing content
ExtraRealtime0= to ExtraRealtime99= Realtime 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if
    1. See #Realtime Settings, you must have "Enable realtime" ticked, and defined an interval there
    2. Uploads the file to destination specified at interval defined
  • Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. Standard interval)
ExtraFTP0= to ExtraFTP99= FTP 1 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if you want MX to use the FTP protocol specified in #Web/FTP Site
  • Don't tick (value shown as 0 in Cumulus.ini) if the remote file is on the computer running MX and a simple Copy File is required
ExtraUTF0= to ExtraUTF99= UTF-8 1 Please see technical guidance on encoding
  • Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters
  • If unticked (0 appears in file), then iso-8859-1 encoding is used
ExtraBinary0= to ExtraBinary99= Binary 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if your file is e.g. an image file (e.g. moon.png)
  • Don't tick (value shown as 0 in Cumulus.ini) if the file is text, HTML, PHP script, JSON, JavaScript
ExtraEOD0= to ExtraEOD99= End of Day 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if your file is to be uploaded during the End of Day process
  • Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. Standard interval)

Location

  • Introduced for legacy Cumulus
  • File Section is [Station]
Parameter Line Entry MX Section Label on Settings page Default Description
Altitude=0 Station Settings → Location Altitude 0 The height above mean sea level where the (pressure) sensor is positioned
AltitudeInFeet=1 Station Settings → Location Altitude Units Default depends on release:
  1. Legacy until 3.11.4: 1 (labelled as feet)
  2. From 3.12.0: 0 (labelled metres)
Radio Setting
  • feet (value shown as 1 in Cumulus.ini)
  • metres (value shown as 0 in Cumulus.ini)
LocName= Station Settings → Location Name (empty) A short name for the location
LocDesc= Station Settings → Location Description (empty) A longer description for the location
"Latitude=0" and "LatTxt=" Station Settings → Location → Latitude "Degrees", "Minutes", "Seconds", and "Hemisphere → North or South" (blank) The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
"Longitude=0" and "LongTxt=" Station Settings → Location → Longitude "Degrees", "Minutes", "Seconds", and "Hemisphere → East or West" (blank) The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file


Optional Report Settings

  • File Section is [NOAA]
Parameter Line Entry Introduced MX Section Label on Settings page Default Description
AutoCopy=0 Release 3.12.0 NOAA Reports Settings → FTP Options Auto Copy NOAA report files 0 (disable) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if your report is to be copied to copy directory during the End of Day process
  • Don't tick (value shown as 0 in Cumulus.ini) for no copy action
AutoFTP=0 First with Cumulus 2 NOAA Reports Settings → FTP Options Auto transfer NOAA report files 0 (disable) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) to enable the file transfer process you have defined for MX, to upload the file for you (at first update time after rollover has completed)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable any file transfer process
AutoSave=1 First with Cumulus 2 NOAA Reports Settings Create NOAA files after daily rollover 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if you want MX to use the (optional) Reports functionality
  • Don't tick (value shown as 0 in Cumulus.ini) if MX Reports functionality not required
City= First with Cumulus 2 NOAA Reports Settings → Site Details City (empty) Enter here your hamlet, village, town, or city, name
CoolingThreshold=22 First with Cumulus 2 NOAA Reports Settings → Thresholds Cooling threshold 65o F or 18.3oC Cold Degree Days are a measure of the need to cool the air to make it more comfortable, based on time above, and temperature difference above, a threshold temperature. An international standard says 22 oCelsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in Cumulus 2 (enhancement request 44), and that was done to match some early look up tables.
CopyDirectory= Release 3.12.0 NOAA Reports Settings → Report Options Copy Directory (empty) The folder on the web server you host to which reports are to be copied
FTPDirectory= First with Cumulus 2 NOAA Reports Settings → FTP Options destination folder Depends on release:
  • (3.1.0 to 3.11.4) blank
  • (3.12.0 onwards) to match change in default web site script specification of Reports folder
Specify the destination folder for file transfer to, on your FTP server
  • Leave at default (for your release) and MX will work with the default web pages script supplied (at same release)
  • Specify a folder relative to FTP root, and MX will upload reports to that folder instead (you are then responsible for writing any script on your web site to find each report and do any processing).
HeatingThreshold=15.5 First with Cumulus 2 NOAA Reports Settings → Thresholds Heating threshold 65o F or 18.3oC Heating Degree Days are a measure of the need for heating, based on time below, and temperature difference below, a threshold temperature. An international standard says 15.5 oCelsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in Cumulus 2 (enhancement request 44), and that was done to match some early look up tables.
MaxTempComp1=22 First with Cumulus 2 NOAA Reports Settings → Thresholds Max temp comparison 1 (empty) The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the cooling degree day threshold in Celsius. Express in Fahrenheit if that is your chosen unit
MaxTempComp2=0 First with Cumulus 2 NOAA Reports Settings → Thresholds Max temp comparison 2 (empty) The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
MinTempComp1=15.5 First with Cumulus 2 NOAA Reports Settings → Thresholds Min temp comparison 1 (empty) The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the heating degree day threshold in Celsius. Express in Fahrenheit if that is your chosen unit
MinTempComp2=0 First with Cumulus 2 NOAA Reports Settings → Thresholds Min temp comparison 2 (empty) The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
MonthFileFormat='NOAAMO'MMyy'.txt' First with Cumulus 2 NOAA Reports Settings → Output Files Monthly filename format 'NOAAMO'MMyy'.txt' (note quotes round NOAAMO and round .txt) Here you specify the filename template for MX to use when reading, or writing, monthly reports

There is a prefix text in quotes,then comes a way to specify months (see Reports_folder#NOAA_style_Report_Naming), and finally comes the mandatory text extension. e.g. "NOAAMO"MMMyyyy".txt" would also be valid.

Name=Personal Weather Station First with Cumulus 2 NOAA Reports Settings → Site Details Site Name (empty) What you would like to see in report title for your station name
NOAAUseUTF8=1 First with Cumulus 2 NOAA Reports Settings → Report Options Use UTF-8 encoding 1 (UTF-8) Please see Reports_folder#Encoding
  • Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters, including the o degree symbol
  • If unticked (0 appears in file), then iso-8859-1 encoding is used, this has a more restricted range of characters, and the o degree symbol is coded differently
RainComp1=0.5 First with Cumulus 2 NOAA Reports Settings → Thresholds Rain comparison 1 (empty) The report will count the number of days when the daily rainfall exceeds this threshold. In the parameter I have quoted, the first comparison has been set to the same as I have set else where as my significant rain threshold
RainComp2= First with Cumulus 2 NOAA Reports Settings → Thresholds Rain comparison 2 (empty) The report will count the number of days when the daily rainfall exceeds this threshold.
RainComp3= First with Cumulus 2 NOAA Reports Settings → Thresholds Rain comparison 3 (empty) The report will count the number of days when the daily rainfall exceeds this threshold.
State= First with Cumulus 2 NOAA Reports Settings → Site Details State (empty) Enter here your local authority area or region (state in USA)
UseDotDecimal=0 Release 3.9.5 - b3100 NOAA Reports Settings → Report Options Use a 'dot' decimal point 0 (disable) Formatting real numbers for when NOAA report parsed by a script

Simple tick or not

  • Tick (value shown as 1 in Cumulus.ini) if you want NOAA reports to use decimal point even if locale says use decimal comma
  • Don't tick (value shown as 0 in Cumulus.ini) if NOAA reports use the integer/decimal separator specified by locale
UseMinMaxAvg=0 Release 3.12.0 NOAA Reports Settings → Report Options Use WHO average or Integrated average 0 (integrated average) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use WHO approach: (min + max)/2
  • Don't tick (value shown as 0 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use integrated calculation: Sum of all temperature measurements divided by count of measurements
YearFileFormat='NOAAYR'yyyy'.txt’ First with Cumulus 2 NOAA Reports Settings → Output Files Yearly filename format 'NOAAYR'yyyy'.txt' Here you specify the filename template for MX to use when reading, or writing, yearly reports

There is a prefix text in quotes,then comes a way to specify months (see Reports_folder#NOAA_style_Report_Naming), and finally comes the mandatory text extension.

12hourformat=0 ??? NOAA Reports Settings → Output Files Time format 0 (24 hour) How times are output on reports
  • 24 Hour (value shown as 0 in Cumulus.ini)
  • 12 Hour (value shown as 1 in Cumulus.ini)


Normal Mean Temperatures

  • File Section is [NOAA]
  • The parameters run from ‘’’NOAATempNormJan=’’’ to ‘’’NOAATempNormDec=’’
  • There is one box labelled for each month on the settings screens
  • All the defaults are (blank)
  • What you enter is the mean temperature, long-term averages (say over 10 or 30 years if available) say is expected that month, often taken from local climate statistics, or your own past measurements

Normal Precipitation

  • File Section is [NOAA]

Rainfall equivalents of mean temperature described above


Optional Structured Query Language Settings

MX uses a software package called "MySqlConnect" to run SQL queries.

Since the text that appeared here was added, documenting plans for the future 3.12.0 release, there have been a number of changes, and now a future release (3.20.0) is expected to make more drastic changes. Therefore the content has been moved to a new "MySqlConnect" page where it is hoped somebody will find it easier to update the content as MX develops.


Optional Third-party Upload Settings

Parameter Line Entry File Section MX Section Action on Settings page Default
ID=
pass=-1
server=cwop.aprs.net
port=14580
Enabled=0
Interval=9
SendSR=0
APRSHumidityCutoff=0
[APRS] APRS/CWOP Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters
User=
 Password=
 Language=en
 Enabled=0
 Interval=900
 SendUV=0
 SendSR=0
 SendSoilTemp=0
 SendIndoor=0
 SendSoilMoisture=0
 SendLeafWetness=0
 SendAirQuality=0
[Awekas] AWEKAS Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters
Enabled=0
 CatchUp=1
 APIkey=
 StationId=
 Interval=15
[OpenWeatherMap] OpenWeatherMap Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters
ID=
 Password=
 Enabled=0
 Interval=15
 SendUV=0
 SendSR=0
 CatchUp=1
[PWSweather] PWS Weather Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters
User=
 Password=
 Enabled=0
 Interval=60
 OauthToken=unknown
 OauthTokenSecret=unknown
 TwitterSendLocation=1
[Twitter] Twitter Please note that twitter is deprecated, no new settings possible, existing settings can be used by people who migrated from Cumulus 1 with working tokens Defaults are as shown in list of parameters
Wid=
 Key=
 Enabled=0
 Interval=10
 SendUV=0
 SendSR=0
 SendAQI=0
 SendSoilMoisture=0
 SoilMoistureSensor=0
 SendLeafWetness=0
 LeafWetnessSensor=0
[WeatherCloud] WeatherCloud Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters
Enabled=0
 StationUID=
 Password=
 Interval=1
 SendRain=0
[WindGuru] Windguru Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters
APIkey=
 StationIdx=0
 Enabled=0
 Interval=15
 SendUV=0
 CatchUp=1
[Windy] Windy.com Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters
ID=
 Password=
 Enabled=0
 Interval=15
 SendUV=0
 SendSR=0
 CatchUp=1
[WOW] Met Office WOW Tick "Enabled" to see list of parameters so you can edit them Defaults are as shown in list of parameters

Optional Web Server

There are two sub-sections below, because the settings for the optional web functionality are split between Station Settings and Internet Settings.


Display Options controlling what appears on default web pages

  • File Section is [Display]
  • MX Section is Station Settings → Display Options
Parameter Line Entry Introduced Label on Settings page Default Description
DisplaySolarData=0 ??? 3.10.0 ??? Display Solar data Unticked (shown as 0 in Cumulus.ini) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if you want MX to display solar data in tables shown on the web pages provided in webfiles folder (from release 3.10.0 onwards)
  • Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display solar data
DisplayUvData=0 ??? 3.10.0 ??? Display UV-I data Unticked (shown as 0 in Cumulus.ini) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if you want MX to display ultra-violet intensity data in tables shown on the web pages provided in webfiles folder (from release 3.10.0 onwards)
  • Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display UV intensity data
NumWindRosePoints=16 Legacy Cumulus Number of wind rose points 16 Drop-down determining if weather station bearing supplied by weather station is to be converted to 8 or 16 compass directions (i.e. whether to include or exclude (in English) NNE, ENE, ESE, SSE, SSW, WSW, WNW, and NNW
  • 8 points
  • 16 points

Despite what it says in the hint on the settings page, leave at default whichever weather station type you use, unless this actually causes you a problem. The parameter was introduced by Steve Loft. Davis wind vanes use a potentiometer to measure wind direction so send Cumulus a bearing that can vary continuously between 1 and 360 degrees. Fine Offset wind vanes use magnetic switches that depend on the magnet under the moving part selecting two switches in the fixed part for the vane being exactly in-between compass directions, and selecting one switch for the main 8 directions and slightly away from the main directions; so they have a bias against sending Cumulus the in-between directions.

UseApparent=1 ??? MX 3.6.0 or 3.10.0 ??? Use Apparent Temperature Ticked (shown as 1 in Cumulus.ini) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) if you want MX to display apparent temperature in tables shown on the web pages provided in webfiles folder (from release 3.10.0 onwards) for consistency with Cumulus prior to release 3.6.0
  • Don't tick (value shown as 0 in Cumulus.ini) if you want MX to display feels like temperature in tables shown on the web pages provided in webfiles folder (from release 3.10.0 onwards) for consistency with Cumulus from release 3.6.0


File transfer and Copy Options controlling transfer of data to default web pages

The settings listed in table below changed dramatically at both 3.10.0 and 3.12.0 releases, but they have gradually evolved throughout the development of MX.

From 3.12.0, MX can optionally either copy files to a web server you host or file transfer files to a commercial web server.

To implement (and customise) this web server functionality, there are many settings as listed alphabetically in this table. The Internet settings page simplifies making settings by providing selections that amend multiple settings in a bulk operation:

  • Some settings (marked ^ in table) are only displayed if you select I want to use the supplied default web site.
    • For these settings, the "Generate" option is enabled in nearly all (see any qualifier) settings
    • If you select "Enable file copy of standard files" (default is disabled) then those settings have their "Copy" option enabled in nearly all (see any qualifier) cases, and their "FTP Transfer" option deselected (instead of defaults shown in table)
    • If you deselect "Enable file transfer of standard files" (default is enabled) then those settings have their "Copy" option disabled, and their "FTP Transfer" option enabled in nearly all (see any qualifier) cases (as per defaults shown in table)
  • The default selections assume you have air quality, and solar, sensors; so you may need to disable some of the defaults the above selections have made
  • If you don't select I want to use the supplied default web site, then all the settings marked ^ are disabled
    • This is what you want if you do not use the MX optional web server functionality
    • If you have a customised web site, you may want to select I want to use the supplied default web site to see the settings that would otherwise all be disabled, and then pick any options that would be useful to you.
Parameter Line Entry File Section Introduced Shown on Settings page? MX Section Label on Settings page Default Description
ActiveFTP=0 [FTP site] Legacy Cumulus No Change directly in file as at release 3.11.x (n/a ) (n/a) *0 = Disabled (default)
  • 1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
Copy-airquality=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings airquality.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the airquality.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
Copy-alldailydegdaydata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailydegdaydata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailydegdaydata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-alldailyhumdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailyhumdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailyhumdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-alldailypressdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailypressdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailypressdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-alldailyraindata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailyraindata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailyraindata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-alldailysolardata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailysolardata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailysolardata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Copy-alldailytempdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailytempdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailytempdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-alldailywinddata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailywinddata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailywinddata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-alltempsumdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings alldailytempsumdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the alldailytempsumdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-availabledata=0 [FTP site] Release 3.12.0 ^ (once only) Internet Settings → Graph File Settings availabledata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the availabledata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-dailyrain=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings dailyrain.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the dailyrain.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-dailytemp=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings dailytemp.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the dailytemp.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-graphconfig=0 [FTP site] Release 3.12.0 ^ (once only) Internet Settings → Graph File Settings graphconfig.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the graphconfig.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-humdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings humdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the humdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-pressdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings pressdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the pressdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-raindata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings raindata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the raindata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-solardata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings solardata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the solardata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Copy-sunhours=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings sunhours.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the sunhours.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Copy-tempdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings tempdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the tempdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-wdirdata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings wdirdata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the wdirdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-websitedata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Standard File Settings websitedata.json → Copy 0 (disabled) Relates to asking MX to process the websitedataT.json file in web folder

Simple tick or not

  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the resulting websitedata.json to your local web server
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-winddata=0 [FTP site] Release 3.12.0 ^ Internet Settings → Graph File Settings winddata.json → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the winddata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Copy-wxnow=0 [FTP site] Release 3.12.0 ^ (disabled) Internet Settings → Standard File Settings wxnow.txt → Copy 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy that file to your local web server
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
CopyMoonImage=0 [FTP site] Release 3.12.0 ^ Internet Settings → Moon Image Copy Moon image file 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy moon image file to your local web server (need to select "Generate Moon Image" see MoonImageEnabled= too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-airquality=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings airquality.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the airquality.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-alldailydegdaydata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailydegdaydata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailydegdaydata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-alldailyhumdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailyhumdata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailyhumdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-alldailypressdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailypressdata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailypressdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-alldailyraindata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailyraindata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailyraindata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-alldailysolardata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailysolardata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailysolarydata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Create-alldailytempdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailytempdata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailytempdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-alldailywinddata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailywinddata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailywinddata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-alltempsumdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailytempsumdata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the alldailytempsumdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-availabledata=0 [FTP site] Release 3.10.0 ^ (once only) Internet Settings → Graph File Settings availabledata.json → Generate 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the availabledata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-dailyrain=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings dailyrain.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the dailyrain.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-dailytemp=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings dailytemp.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the dailytemp.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-graphconfig=0 [FTP site] Release 3.10.0 ^ (once only) Internet Settings → Graph File Settings graphconfig.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the graphconfig.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-humdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings humdata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the humdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-pressdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings pressdat.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the pressdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-raindata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings raindata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the raindata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-solardata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings solardata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the solardata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Create-tempdata=1 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings dailytemp.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the dailytemp.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-sunhours=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings dailytemp.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the dailytemp.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Create-tempdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings tempdata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the tempdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-wdirdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings wdirdata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the wdirdata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-websitedata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings websitedata.json → Generate 1 (enabled) Relates to asking MX to process the websitedataT.json file in web folder

Simple tick or not

  • Tick (value shown as 1 in Cumulus.ini) for MX to process the websitedataT.json file into websitedata.json
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-winddata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings winddata.json → Generate 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the winddata.json file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Create-wxnow=0 [FTP site] Release 3.10.0 ^ (disabled) (depends on release)
  • (releases 3.10.0 to 3.11.4) Internet Settings → Web/FTP Settings
  • (release 3.12.0 on) Internet Settings → Standard File Settings
wxnow.txt → Generate 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate a wsnow.txt file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
DeleteBeforeUpload=0 [FTP site] legacy Cumulus (always) (depends on release)
  • (releases 3.0.0 to 3.11.4) Internet Settings → Web Settings → General Settings
  • (release 3.12.0 on) Internet Settings → Web Site → General Settings
Delete before upload 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to delete existing file (with same name) on the web server before it creates the new file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (this is the option appropriate to most servers)
Directory= [FTP site] Legacy Cumulus (always) Internet Settings → Web/FTP Site Remote FTP Directory (blank) Directory (including path) on your server to which FTP (if 'Enabled' is enabled) will upload the files.
  • value is left Blank, default, the root position specified by ftp server
  • A path from the starting point as the position specified by ftp server

Not used for ExtraRemoteNN parameters

DisableEPSV=0 [FTP site] Beta Release 3.0.0 build 3045 No Still Change directly in file as at release 3.11.x (n/a ) 0 *0 = Disabled (default)
  • 1 = Enabled, to use Extended Passive FTP-mode
DisableFtpsExplicit=0 [FTP site] Release 3.4.0 - Build 3064 No Change directly in file as at release 3.11.x (n/a ) 0 (change value following attribute)
  • 0 = Disabled (default) use FTPS Explicit mode
  • 1 = Enabled, to use FTPS Implicit mode
Enabled=1 [FTP site] Release 3.12.0 (always) Controls whether ^ settings have "File Transfer" option enabled Internet Settings → Interval Configuration Enable file transfer of standard files 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to enable file transfer of standard files (see rows marked ^ for further selections)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
EnableLocalCopy=0 [FTP site] Release 3.12.0 (always) Controls whether ^ settings have "Copy" option enabled Internet Settings → Interval Configuration 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to enable copying of files (see rows marked ^ for further selections)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
EnableRealtime=1 [FTP site] Legacy Cumulus (always) Internet Settings → Realtime Settings Enable Realtime 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate a timer that will permit real time actions
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-airquality=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings airquality.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the airquality.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
Ftp-alldailydegdaydata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailydegdaydata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailydegdaydata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-alldailyhumdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailyhumdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailyhumdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-alldailypressdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailypressdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailypressdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-alldailyraindata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailyraindata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailyraindata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-alldailysolardata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailysolardata.json → File Transfer 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailysolardata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Ftp-alldailytempdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailytempdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailytempdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-alldailywinddata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alldailywinddata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailywinddata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-alltempsumdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings alltempsumdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alltempsumdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-availabledata=0 [FTP site] Release 3.10.0 ^ (once only) Internet Settings → Graph File Settings availabledata.json → File Transfer 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the availabledata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-dailyrain=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings dailyrain.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the dailyrain.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-dailytemp=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings dailyrain.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the dailyrain.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-graphconfig=0 [FTP site] Release 3.10.0 ^ (once only) Internet Settings → Graph File Settings graphconfig.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the graphconfig.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-humdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings humdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the humdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-pressdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings pressdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the pressdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-raindata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings raindata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the raindata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-solardata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings solardata.json → File Transfer 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the solardata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Ftp-sunhours=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings sunhours.json → File Transfer 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the sunhours.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
Ftp-tempdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings tempdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the tempdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-wdirdata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings wdirdata.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the wdirdata.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-websitedata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Standard File Settings websitedata.json → File Transfer 0 (disabled) Relates to asking MX to process the websitedataT.json file in web folder

Simple tick or not

  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the resulting websitedata.json to your local web server
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-winddata=0 [FTP site] Release 3.10.0 ^ Internet Settings → Graph File Settings dailyrain.json → File Transfer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the dailyrain.json file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
Ftp-wxnow=0 [FTP site] Release 3.10.0 ^ (disabled) (depends on release)
  • (release 3.10.0 to 3.11.4) Internet Settings → Web/FTP Settings
  • (release 3.12.0 on) Internet Settings → Standard File Settings
wxnow.txt → File Transfer 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer that file to your local web server
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
ForumURL= [Web Site] Legacy Cumulus (always) (depends on release)
  • (releases 3.0.0 to 3.11.4) Internet Settings → Web Site
  • (release 3.12.0 on) Internet Settings → Miscellaneous
Forum URL (blank) Left blank to allow you to choose format

3.10.0 Default web pages use "<a href=\"https://cumulus.hosiene.co.uk/index.php\">forum</a>"

Some alternative URL examples:

FTPlogging=0 [FTP site] Legacy Cumulus FTP logging Depends on release installed:
  1. (Releases 3.1.0 to 3.10.5) Internet Settings → → Web Settings → General Settings
  2. (Releases 3.11.0 to 3.11.4) Program Settings → Program General Options
  3. (Release 3.12.0 onwards) Program Settings → Logging Options
(n/a) (n/a) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX in standard FTP mode add output to ftplog.txt.

to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name (this is the option appropriate to most servers)

  • Don't tick (value shown as 0 in Cumulus.ini) to disable updates to ftplog.txt

For other types of file transfer (STTP, FTPS), any extra diagnostic information appears in latest log in MXdiags folder

FTPRename=1 [FTP site] Legacy Cumulus (always) (depends on release)
  • (releases 3.0.0 to 3.11.4) Internet Settings → Web Settings → General Settings
  • (release 3.12.0 on) Internet Settings → Web Site → General Settings
FTP rename 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name (this is the option appropriate to most servers)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable

The chief advantage of using rename is that it minimises the time that the web server cannot serve a file (while it is being updated)

Host= [FTP site] Legacy Cumulus (always) Internet Settings → Web/FTP Site Host name (blank) This is either the name, or the IP address, of the ftp server to which you connect when you upload pages to your web site.
IncludeMoonImage=1 [FTP site] Release 3.5.0 (always) Internet Settings → Moon Image (FTP) Upload Moon image file 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer moon image file to your local web server (need to select "Generate Moon Image" see MoonImageEnabled= too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
IntervalFtpEnabled=1 [FTP site] Release 3.12.0 ?? Internet Settings → Interval Settings Enable file transfer update interval 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file transfer actions
  • Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected LocalCopyEnabled (see below)
ListWebTags=0 [Station] Legacy Cumulus Only from Release 3.12.0 Depends on release:
  • (3.5.1 to 3.11.4) Manual edit of file
  • (3.12.0 onwards) Station settings → Common Options → Advanced options
0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to create WebTags.txt file when Cumulus is restarted (contains an unordered list of all the tag names your Cumulus build will recognise and process)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
LocalCopyEnabled=0 [FTP site] Release 3.12.0 (always) Internet Settings → Interval Configuration Enable local copy update interval 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file copy actions
  • Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected file transfer IntervalFtpEnabled (see previous)
LocalCopyFolder= [FTP site] Release 3.12.0 (always) Internet Settings → Interval Configuration (blank) Folder (including path) to which MX will copy the standard files (see rows marked ^ for further selections) if 'EnableLocalCopy' is enabled
MoonImageEnabled=1 [Graphs] Release 3.5.0 (always) Internet Settings → Moon Image Generate Moon Image ^ Default controlled by selection of default web site Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to use System Drawing to modify CumulusMX/web/MoonBaseImage.png and create CumulusMX/web/moon.png
  • Don't tick (value shown as 0 in Cumulus.ini) if you don't need MX to create a "moon.png"
MoonImageSize= [Graphs] Release 3.5.0 (always) Internet Settings → Moon Image Image size ??? Enter a size (in pixels) for the generated moon image (according to space on your web page)
Password= [FTP site] Legacy Cumulus (always) Internet Settings → Web/FTP Site Password (blank) The password for your FTP/SFTP/FTPS connection (masked out on settings page, shown in plain text in file)
Port=21 [FTP site] Legacy Cumulus (always) Internet Settings → Web/FTP Site FTP port 21 (plain FTP) you normally use either standard FTP (port=21), SSH for FTP i.e. SFTP (port=22), or SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) i.e.FTPS (port=990 normally, may be 25). If you get connection refused, messages in the MXdiags log, then you may need to try alternative protocol and/or alternative ports.
RealtimeFTPEnabled=0 [FTP site] Legacy Cumulus ^ Internet Settings → Realtime Settings Enable realtime FTP 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to be able to do file transfers at real-time interval
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
RealtimeGaugesTxtCopy=0 [FTP site] Release 3.12.0 ^ Internet Settings → Realtime Settings realtimegauges.txt 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the realtimegauges.txt file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
RealtimeGaugesTxtCreate=0 [FTP site] Release 3.10.0 ^ Internet Settings → Realtime Settings realtimegauges.txt → Generate 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the realtimegauges.txt file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
RealtimeGaugesTxtFTP=0 [FTP site] Release 3.10.0 ^ Internet Settings → Realtime Settings realtimegauges.txt → File Transfer 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the realtimegauges.txt file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
RealtimeInterval=45000 [FTP site] Legacy Cumulus ^ Internet Settings → Realtime Settings Realtime interval 45000 milliseconds (45 seconds) Enter interval time in seconds (decimals allowed), stored in file converted to milliseconds
RealtimeTxtCopy=0 [FTP site] Release 3.12.0 ^ Internet Settings → Realtime Settings realtime.txt 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to copy the realtime.txt file to your local web server (need to select "Generate" too)
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
RealtimeTxtCreate=0 [FTP site] Release 3.10.0 ^ Internet Settings → Realtime Settings realtime.txt → Generate 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to generate the realtime.txt file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
RealtimeTxtFTP=0 [FTP site] Release 3.10.0 ^ Internet Settings → Realtime Settings realtime.txt → File Transfer 0 Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the realtime.txt file
  • Don't tick (value shown as 0 in Cumulus.ini) to disable
RecordSetTimeoutHrs=24 [Station] Release 3.5.1 Only from Release 3.12.0 Depends on release:
  • (3.5.1 to 3.11.4) Manual edit of file
  • (3.12.0 onwards) Two places:
    1. Station setings → General Settings → Advanced options
    2. Station settings → Common Options → Advanced options
Depends on where changed (respectively):
  1. New record timeout
  2. Record set timeout
24 Number of hours before the following web tags are reset: TempRecordSet, WindRecordSet, RainRecordSet, HumidityRecordSet, PressureRecordSet, HighTempRecordSet, LowTempRecordSet, HighAppTempRecordSet, LowAppTempRecordSet, HighHeatIndexRecordSet, LowWindChillRecordSet, HighMinTempRecordSet, LowMaxTempRecordSet, HighDewPointRecordSet, LowDewPointRecordSet, HighWindGustRecordSet, HighWindSpeedRecordSet, HighRainRateRecordSet, HighHourlyRainRecordSet, HighDailyRainRecordSet, HighMonthlyRainRecordSet, HighHumidityRecordSet, HighWindrunRecordSet, LowHumidityRecordSet, HighPressureRecordSet, LowPressureRecordSet, LongestDryPeriodRecordSet, LongestWetPeriodRecordSet, HighTempRangeRecordSet, LowTempRangeRecordSet
Sslftp= [FTP site] MX beta (always) Internet Settings → Web/FTP Site Select the FTP Protocol to use 0 Drop down list:
  • 0 = FTP (plain old FTP) - default
  • 1 = Use SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) for FTP (FTPS)
  • 2 = Use Secure Shell Home (SSH) for FTP (SFTP)
SshFtpAuthentication=Password [FTP site] Release 3.8.2 - build 3092 Only if SFTP selected above Internet Settings → Web/FTP Site SFTP Authentication method Password Drop down list:
  • 0 = Password
  • 1 = Pre-shared key
  • 2 = Password or pre-shared key
SshFtpPskFile= [FTP site] Release 3.8.2 - build 3092 only if 1 or 2 selected in previous setting Internet Settings → Web/FTP Site Pre-shared Private Key file for SFTP (blank) Filename for your private PSK file, include the full path if the file is not in same folder as CumulusMX.exe
UpdateInterval=60 [FTP site] legacy software ^ Internet Settings → Interval Settings Web interval 60 Interval between standard web updates in minutes
Username= [FTP site] legacy software (always) Internet Settings → Web/FTP Site Username (blank) the user name for connecting to your server
UTF8encode= [FTP site] legacy software (always) (depends on release)
  • (releases 3.0.0 to 3.11.4) Internet Settings → Web Settings → General Settings
  • (release 3.12.0 on) Internet Settings → Web Site → General Settings
UTF-8 encoding Default depends on release:
  • (Legacy versions and MX up to 3.9.7) 0 (ISO 8859-1 character set)
  • (Release 3.10.0 on) 1 (UTF-8 encoding enabled)
Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to use UTF-8 encoding in all .json files
  • Don't tick (value shown as 0 in Cumulus.ini) and MX will create its .json files using ISO 8859-1 character set, please note that this encoding is incompatible with web pages included in webfiles folder; so if you upgrade from an earlier release, you may need to change this setting
WebcamURL= [Web Site] Legacy Software (always) (depends on release)
  • (releases 3.0.0 to 3.11.4) Internet Settings → Web Site
  • (release 3.12.0 on) Internet Settings → Miscellaneous
Webcam URL (blank) Can be used to add a link to any other web page, you have on any web server. In default web pages will be labelled as "web cam", but for your own web pages, this might lead to a home or blog page.

Program Start-up Options

  • Introduced release 3.9.4 - b3099
  • File Section is [Program]
Parameter Line Entry MX Section Label on Settings page Default Description
StartupPingHost= Program Settings → Program Start-up Options Host to PING on program start-up None (no remote host) Add a hostname or IP to address to ping at startup. Cumulus waits until the ping is successful before trying to read from your station. Leave blank to disable
StartupPingEscapeTime=999 Program Settings → Program Start-up Options PING escape time (mins) 999 (minutes) Specify a time after which if no ping response is received carry on starting Cumulus MX anyway
StartupDelaySecs=0 Program Settings → Program Start-up Options Start-up Delay (secs) zero (no delay) Add a delay before the Cumulus tries to start reading the station.
StartupDelayMaxUptime=300 Program Settings → Program Start-up Options Max system uptime to apply the start-up delay 300 (seconds equivalent to 5 minutes) The time that has passed sice MX was started (up-time) is compared against the (max delay time) figure here.
  • If max delay time less than up-time, the delay specified in previous parameter will NOT be applied
  • If up-time less than this max delay time, then MX will apply any delay specified in previous parameter
  • If this parameter is set to zero, then MX will always apply any delay specified in previous parameter

Proxy

This is a continuation of an experimental legacy Cumulus software feature, please see here for request and see here for potential content. I have not seen any evidence that this feature ever came out of beta, and nobody has ever commented on its use, so I see no reason to do any further documentation.

Station specific alternatives

A number of settings are shown only for specific station types, and so the following tables are grouped here.

Since MX is being developed by someone who uses a Davis station, a lot of "Labels on the Settings Screens" mention "Davis" even if you have selected a different station, because the code was written by copy and paste!

Solar

Cumulus MX is unable to work out if you have a solar sensor, so these options are always displayed.

Parameter Line Entry File Section Introduced MX Section Label on Settings page Default Description
SolarCalc=0 [Solar] 3.13 Station Settings → Solar Solar Calculation Method 0=Ryan-Stololzenbach Drop-down list:
  • 0=Ryan-Stololzenbach
  • 1=Bras
SunThreshold=75 [Solar] 3.13 Station Settings → Solar Sun Threshold (percent) 75 Enter a number
SolarMinimum=0 [Solar] 3.13 Station Settings → Solar Solar minimum (W/m2) 30 Enter a number
RStransfactorJul=0.80000000000000004 [Solar] 3.14 Station Settings → Solar RS Transmission factor (June)

(Note the internal calculation does apply this to June, but some MX releases were incorrectly typed to say "July" on the settings screen).

0.8 MX does a sinusoidal interpolation between this value and the next. So this June factor changes very little either side of that solstice, with the average value from both factors applying at the equinoxes (March and September) and different amounts of each factor each side of equinox. (So actually more like a cosine interpolation!)
RStransfactorDec=0.80000000000000004 [Solar] 3.14 Station Settings → Solar RS Transmission factor (December) 0.8 MX does a sinusoidal interpolation between last value and this one. So this December factor changes very little either side of that solstice, with the average value from both factors applying at the equinoxes (March and September) and different amounts of each factor each side of equinox. (So actually more like a cosine interpolation!)
UseBlakeLarsen=0 [Solar] Legacy Extra Sensor Settings Blake-Larsen Sunshine Recorder 0=deselected checkbox

Selecting the weather station type determines which options are shown

Parameter Line Entry File Section Introduced MX Section Label on Settings page Default Description
Type= -1 [Station] 0 (all releases), 1 (Early legacy releases), 2 and 3 (from version 1.7.0), 4 (from version 1.7.12), 5 (from version 1.8.0), 6 (from version 1.8.3), 7 (from version 1.9.1), 8 to 10 (from release 1.9.2), 11 (from a MX beta build), and 12 (from release 3.2.0) Station Settings → General Settings Station type -1 (not yet defined) Drop-down
  • -1 = "Select Station", shown before a selection from those below is made
  • 0 = Davis Vantage Pro station
  • 1 = Davis Vantage Pro2 or Vue station
  • 2 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) which have a serial port connection and have wireless connection (e.g. WMR-928 station)
  • 3 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) which have a serial port connection and have wired connection (e.g. WM-918 station)
  • 4 = Reading from file EasyWeather.dat (using EasyWeather software version 6.2, or earlier, running continuously with Cumulus). Fine Offset weather stations that record Solar and UV measurements output to EasyWeatherPlus.dat file when Easyweather software version 6.x is running. This has the same fields as easyweather.dat, plus two extra fields for Solar and UV data at the end, and so Cumulus can understand the fields you must also have LogExtraSensors=1 set.

NOTE: You can also use Type=4 if you want to run Cumulus with reduced functionality without a weather station attached, to view historical observations. A full set of (historic) files in the data subfolder copied from a system with a weather station attached is needed, but in this case, the EWFile= attribute should be at its default of not having any filename value.

  • 5 = Fine Offset, Maplin, Chas Olsen, MyDEL, Nevada, Watson, Tycon Power, Aercus, etc as defined in Fine Offset section in Supported_Devices article (without solar measurement sensors (with or without solar recharging))
  • 6 = For all La Crosse WS23xx models e.g. WS2300
  • 7 = Fine Offset/Watson/MyDel etc with Solar Sensors as defined in Fine Offset with UV/Light sensor in Supported_Devices article.
  • 8 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) using WMR100-200_Protocol e.g. WMR100
  • 9 = Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) using WMR100-200_Protocol e.g. WMR200
  • 10 = Instromet (with optional extra solar sensors or without)
  • 11 = Davis WLL
  • 12 = Ecowitt GW1000 and Froggit DP1500 (and any equivalents)

Selection made here determines what MX sections appear on the Station Settings page

Model= [Station] Early legacy version Station Settings → General Settings Station model (empty) The weather station model description that you want output by the web tag <#stationtype>

Airlink

The details in this sub-section need to be checked by someone who uses the relevant hardware.

  • Introduced Release
  • File Section is [AirLink]
  • Not Shown on Settings page?

IsWllNode=0 WLv2ApiKey= WLv2ApiSecret= AutoUpdateIpAddress=1 In-Enabled=0 In-IPAddress=0.0.0.0 In-WLStationId=-1 In-Hostname= Out-Enabled=0 Out-IPAddress=0.0.0.0 Out-WLStationId=-1 Out-Hostname= AQIformula=0

Parameter Line Entry Shown on Settings page? MX Section Label on Settings page Default Description

Davis

Two Wiki sub-sections, that need to be checked by by somebody who uses the relevant functionality:


Davis VP/VP2/Vue

Crystal Clear info.png This document is 'Work In Progress' so content may not be complete.

Request for help from Wiki Readers

  • Do you understand how MX works?
  • Do you use hardware, or MX functionality, that is not yet documented? Can you begin that documenting?
  • Can you contribute simple text for novice users, examples of what you have done, correction of typing or factual errors, or supply missing details?
  • Will you make this page more useful by bringing content up-to-date as new releases change some information written for older releases?
  • Does any page need a section for novices, so they don't need to read more technical information further down that page?
  • Is there some information on this page, that should be on a separate page? Can you create the new page and move the less relevant information off this page, don't forget this page needs a link to the new page so people who expect to find it here know where it has moved to?

If you plan on contributing to the Wiki, then you will need an account.

  • Please use the Request Account form to apply for an account. Note that the Wiki is currently undergoing restructuring and is largely locked for editing, but please apply for an account if you wish to contribute in the future.
  • You will find help on how to contribute to this wiki at How to Edit.
  • If you need to consult others, please use the Cumulus Wiki suggestions forum.

Please be aware that information on this page may be incorrect.

This table does not yet have all details in it.

  • Introduced for legacy Cumulus
  • File Section is [Station]
  • Only "Shown on Settings page" if either "Type=0" or "Type=1"
Parameter Line Entry Label on Settings page Default Description
[Station] Section name - the following parameters appear in Station section
VP2SleepInterval=500 500 (milli-seconds) the period which Cumulus waits between reads of the data from Davis stations, the value is in milliseconds.
  • if you suspect that data is being missed, reduce number
  • For VirtualVP users, tests revealed that VP2SleepInterval = 1100 seems to work the best. It updates every two seconds with few exceptions.
VPClosedownTime=x (default not yet documented) x is the number of seconds after the start of the re-connect attempts that you want the program to close itself
DavisCalcAltPress=1 1 Davis stations calculate Sea Level Pressure (SLP) from Station Pressure (SP) using a formula based on temperature, humidity, and altitude

CWOP require 'Altimeter Pressure' (AP) to be uploaded, i.e. a value calculated simply using altitude.

  • 0 = Use SLP supplied by Davis
  • 1 = Convert the SP Davis supplies to AP using the altitude you have supplied.
SyncDavisClock=0 0 When set, at Cumulus start-up and at a fixed time (default 04:00, see next parameter) each day, Cumulus will set the Davis VP/VP2 clock to within a minute of the same time as the PC. (From build 3015 for MX).
  • 0 = Disabled, default (as deselected on the Station Configuration Screen)
  • 1 = Enabled, ensures that when Cumulus asks the station for data since time X, both recognise X!
ClockSettingHour=4 4 Controls what hour of the day the SyncDavisClock activity will take place if it is enabled.
  • 4 = 04:00 (default value)
  • 0-23 = 00:00 to 23:00
VP2ConnectionType=1 Weather station connection type
  • 0 = serial (see next parameter to specify COM port)
  • (1 = usb - setting no longer available on screen, remains as default in cumulus.ini for those not using a Davis)
  • 2 = TCP/IP (see later parameters to specify ports)

Default is type 1, i.e. neither option on screen selected, so if you use a Davis you must select either serial or TCP/IP.

VP2TCPPort=22222 2222 Communications port used if VP type has TCP/IP selected.
VP2IPAddr=0.0.0.0 0.0.0.0 Weather station IP address if VP type has TCP/IP selected.
VP2PeriodicDisconnectInterval=0 0 (disable) When the clock minute changes, Cumulus stops the current stream of data from the console, disconnects, waits for the specified number of milliseconds, to allow the Weatherlink IP to briefly connect to the Davis Weatherlink site. Cumulus then attempts to reconnect.

Set it to zero to disable, if you are not using the Weatherlink site.

LogExtraSensors=0 0 This is set in the Settings block on the Station settings screen off the configuration menu. Set this to 1 if you have additional sensors (e.g. a Davis Leaf Wetness probe) to make Cumulus read, display, and log the readings from the sensors. You don't select this for Solar/UV sensors.
UseDavisLoop2=1 1 (use Loop2) The current MX code uses LOOP2 for two purposes. First, it uses the 'peak 10-minute gust' value, to avoid the problem where a gust might be missed, and secondly it uses the 'absolute pressure' value to make calculation of 'altimeter pressure' easier and more accurate. This is mainly used if you upload to CWOP.
  • 1 (default) = Cumulus MX will use the LOOP2 packet for Davis Weather Stations by default. The LOOP2 packet is supported on the VP2 with firmware version 1.90 or later, and on the Vue.
  • 0 = Select this if you have a Vantage Pro (i.e. the original 'VP1'), or a VP2 with pre-1.90 firmware, or if you are using Virtual VP, none of these support the LOOP2 packet.

Without this setting, Cumulus will revert to calculating the 10-minute gust value itself from the individual wind speed readings, but it will not currently attempt to calculate altimeter pressure correctly, it will simply use the sea-level pressure instead. This is likely to be an issue if you are at high altitude and you upload to CWOP using Cumulus MX.

DavisIPResponseTime=500 500 The length of time in milliseconds which Cumulus waits to allow a response from the console to a command (i.e. a request for any kind of data) from an IP logger, see Cumulus MX forum where times up to 2000ms are suggested.
ForceVPBarUpdate=0 0 (normal) Added in build 3042 (January 2017).

The default (value=0) is to assume standard barometer updates on Davis stations. Set to 1, by adding ForceVPBarUpdate=1 in [Station] section to force more frequent barometer updates on Davis stations. Steve says "Having checked the code, I see it asks for 20 packets from the 'LOOP2' if the barometer forcing is on, otherwise it stops receiving LOOP data after 50 packets". Note that ForceVPBarUpdate=1 is only useful on very old versions of the console firmware.

DavisIncrementPressureDP=0 1 (from version 3.0.0 build 3042)
  • 0= Pressure values shown to 1 decimal places when reported in mb/hPa, shown to 2 decimal places for inHg
  • 1= Pressure values shown to 2 decimal places when reported in mb/hPa, shown to 3 decimal places for inHg
VPrainGaugeType=0 1 Specifies the units selected on your Vantage Pro Rain Gauge.
  • 0 = Metric Rain Adapter fitted, a 0.2mm gauge
  • 1 = Imperial gauge without adapter, a 0.01" gauge.

Note that if the units you choose for rainfall do not match your rain gauge type, conversion rounding errors will then occur.

DataLogging=0 0 (Build 3018 onwards).
  • 0 (default) = Cumulus MX will not add extra logging.
  • 1 = To add extra logging to the diags file for data received from Davis stations. Use this with care, the log will get very large.

I've also added some more diagnostics to try to find the cause of the problem where data stops being read from Davis stations. Debug logging is required to be turned on. (Build 3022 onwards).

AutoUpdateIpAddress=1 1 default = 1, set to 0 to switch off the WLL autodetection of IP address. This is a workaround for a WLL firmware bug that does not update the IP address when it changes using DHCP.
ZeroConfig (default not known) set this on station settings screen; to enable/disable the entry/update of the stations IP address via auto-discovery

Davis WeatherLink Live

Crystal Clear info.png This document is 'Work In Progress' so content may not be complete.

Request for help from Wiki Readers

  • Do you understand how MX works?
  • Do you use hardware, or MX functionality, that is not yet documented? Can you begin that documenting?
  • Can you contribute simple text for novice users, examples of what you have done, correction of typing or factual errors, or supply missing details?
  • Will you make this page more useful by bringing content up-to-date as new releases change some information written for older releases?
  • Does any page need a section for novices, so they don't need to read more technical information further down that page?
  • Is there some information on this page, that should be on a separate page? Can you create the new page and move the less relevant information off this page, don't forget this page needs a link to the new page so people who expect to find it here know where it has moved to?

If you plan on contributing to the Wiki, then you will need an account.

  • Please use the Request Account form to apply for an account. Note that the Wiki is currently undergoing restructuring and is largely locked for editing, but please apply for an account if you wish to contribute in the future.
  • You will find help on how to contribute to this wiki at How to Edit.
  • If you need to consult others, please use the Cumulus Wiki suggestions forum.

Please be aware that information on this page may be incorrect.

This table has not been populated yet

  • Introduced in a MX beta build
  • File Section is [WLL]
  • Only "Shown on Settings page" if "Type=11"
Parameter Line Entry Label on Settings page Default Description
[Station] Section name - the following parameters appear in Station section

EasyWeather (Reading File instead of connecting to a Weather Station)

This sub-section is based on what applied for the legacy software, assuming nothing has changed for MX.

  • Introduced in a Legacy version
  • File Section is [Station]
  • MX Section is "EasyWeather File Settings"
  • Only "Shown on Settings page" if "Type=4"
Parameter Line Entry Label on Settings page Default Description
EWInterval=10 File Read Interval 10 (minutes between new line becoming available in file) Cumulus needs to know how often to read a new record from the easyweather.dat file. Enter any number in box.
  • 0= Default, meaning not applicable
  • n= any positive decimal value representing Easyweather version 6.2, or earlier, logging interval in minutes (used for reading single latest observations from Easyweather software output). Note to specify seconds, use decimal minutes, e.g. 30 seconds = 0.5
EWFile= Filename (empty) * Full file path/name for Easyweather.dat or EasyWeatherPlus.dat
  • (empty) (i.e. attribute and equals sign, but no value) Note: If you want to run Cumulus without an attached weather station (because your station has a fault or because you have a second PC), it is possible to run Cumulus with station Type=4 but with the default of no file specified in this parameter. The full Cumulus directory structure and its files including those in the data sub-directory are needed (kept from when your station was working or copied from the PC with the station). Although only the old observations can be accessed, (no new ones are being added), this does allow analysis of the old observations via all Cumulus features

See FAQ here for reduced functionality using Cumulus 1 in this way.

EWminpressureMB=900 Minimum Pressure Value 900 Cumulus will ignore all pressure readings from the station that are less than this value (units are always hPa/millibars)
EWmaxpressureMB=1200 Maximum Pressure Value 1200 Cumulus will ignore all pressure readings from the station that are greater than this value (units are always hPa/millibars)
EWMaxRainTipDiff=40 Rain Tip Difference Default=30 tips in Cumulus 1, MX default is 40 tips This configurable threshold is the maximum feasible amount of rain between updates (i.e. within 48-seconds on Fine Offset stations without solar, 60 seconds on those measuring solar), set in units of count of tips.

For standard Fine Offset rain gauges, each tip represents 0.3mm, so 30 tips are equivalent to 9 mm, or just over a third of an inch in 48 seconds.

This setting affects rain rate, rain last hour, rain so far today (and what is recorded in today.ini/dayfile.txt), but does not affect the web tag <#r24hour>.

EWpressureoffset=x.y Pressure Offset 9999 The pressure that Cumulus MX processes is equal to what read in the file plus the value set for this parameter. Normally used to convert the station pressure to the equivalent Sea Level Pressure.

Ecowitt GW1000 and Froggit DP1500 (and any equivalents) specific

Crystal Clear info.png This document is 'Work In Progress' so content may not be complete.

Request for help from Wiki Readers

  • Do you understand how MX works?
  • Do you use hardware, or MX functionality, that is not yet documented? Can you begin that documenting?
  • Can you contribute simple text for novice users, examples of what you have done, correction of typing or factual errors, or supply missing details?
  • Will you make this page more useful by bringing content up-to-date as new releases change some information written for older releases?
  • Does any page need a section for novices, so they don't need to read more technical information further down that page?
  • Is there some information on this page, that should be on a separate page? Can you create the new page and move the less relevant information off this page, don't forget this page needs a link to the new page so people who expect to find it here know where it has moved to?

If you plan on contributing to the Wiki, then you will need an account.

  • Please use the Request Account form to apply for an account. Note that the Wiki is currently undergoing restructuring and is largely locked for editing, but please apply for an account if you wish to contribute in the future.
  • You will find help on how to contribute to this wiki at How to Edit.
  • If you need to consult others, please use the Cumulus Wiki suggestions forum.

Please be aware that information on this page may be incorrect.

An Ecowitt user needs to check/update this sub-section, it is understood significant changes are included in 3.12.0 beta builds, but the forum does not give away any details

  • Introduced in release 3.2.0
  • File Section is [GW100]
  • MX Section is "Ecowitt GW1000 Settings"
  • Only "Shown on Settings page" if "Type=12"
Parameter Line Entry Label on Settings page Default Description
AutoUpdateIpAddress=1 Auto-discovery 1 (selected) Should MX attempt to discover IP address
  • 0=Disable
  • 1=Enable
IPAddress= IP address (no default) stores the IP address of your GW1000 WiFi logger
MACAddress= MAC addresss (no default) Populated by MX when auto-discovery enabled


Fine Offset Stations

  • Introduced in a Legacy version
  • File Section is [Station]
  • MX Section is "Fine Offset Settings"
  • Only "Shown on Settings page" if either "Type=5" or "Type=7"


Parameter Line Entry Introduced Shown on Settings page? MX Section Label on Settings page Default Description
FOReadAvoidPeriod=3 MX release ?? Only if Fine Offset selected Station Settings → Fine Offset Advanced Settings Read Avoid Period 3 (seconds) If previous setting enabled, MX will avoid reading the circular memory from the number of seconds specified before it expects Fine Offset to be writing to the circular memory, to the number of seconds specified after it expects Fine Offset to be writing to the circular memory

(One issue is that Fine Offset will move from one position to the next position in the circular memory, at the Fine Offset Logging Interval, but will delay this move by up to one minute, if the existing memory position is actually being updated by a read from the sensors and normally those updates happen every 40 seconds for non-solar sensors, and every 60 seconds for solar sensor)

?? MX release ?? Only if Fine Offset selected Station Settings → Fine Offset Advanced Settings Set the Fine Offset Logger interval to match Cumulus MX interval 0 (disabled) Simple tick or not - labelled as "Experimental - use with caution"
  • Tick (value shown as 1 in Cumulus.ini) for MX to attempt to "update the Davis interval" (I said copy and paste was used from Davis section!) to match the interval MX is using.
  • Don't tick (value shown as 0 in Cumulus.ini) for no effect on your weather station
FineOffsetReadTime=150 MX release ?? Only if Fine Offset selected Station Settings → Fine Offset Advanced Settings Request/Read Delay 150 (milliseconds) Adjust time (in milliseconds) between request for read, and actual attempt to read data via USB
ProductID=-1 MX release ?? Only if Fine Offset selected Station Settings → Fine Offset Advanced Settings USB Product Id (PID) -1 (default setting) Advanced setting if you don't want to leave it to MX to find your HID
SyncFOReads=0 Legacy Cumulus Only if Fine Offset selected Station Settings → Fine Offset Settings Synchronise Reads 0 (disabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to attempt to work out when your Fine Offset is writing data to the console log, so that MX does not read the Fine Offset circular memory when it is being updated
  • Don't tick (value shown as 0 in Cumulus.ini) for MX to read the Fine Offset circular memory whenever it next wants data
  1. The parameter was added for legacy releases, to try to reduce the occurrence of "lock-up" issues.
  2. MX uses a different way to interrogate Fine Offset stations, originally ticking this could result in more reads being skipped, than actually processed, potentially updating just a few times a day, so it was best disabled!
  3. The MX code relating to this parameter was rewritten 1n 3.11.0, but the developer labels this as an "attempt", so it may still be best to try to manage without enabling this setting
VendorID=-1 MX release ?? Only if Fine Offset selected Station Settings → Fine Offset Advanced Settings USB Vendor Id (PID) -1 (default setting) Advanced setting if you don't want to leave it to MX to find your HID

Instromet Settings

Crystal Clear info.png This document is 'Work In Progress' so content may not be complete.

Request for help from Wiki Readers

  • Do you understand how MX works?
  • Do you use hardware, or MX functionality, that is not yet documented? Can you begin that documenting?
  • Can you contribute simple text for novice users, examples of what you have done, correction of typing or factual errors, or supply missing details?
  • Will you make this page more useful by bringing content up-to-date as new releases change some information written for older releases?
  • Does any page need a section for novices, so they don't need to read more technical information further down that page?
  • Is there some information on this page, that should be on a separate page? Can you create the new page and move the less relevant information off this page, don't forget this page needs a link to the new page so people who expect to find it here know where it has moved to?

If you plan on contributing to the Wiki, then you will need an account.

  • Please use the Request Account form to apply for an account. Note that the Wiki is currently undergoing restructuring and is largely locked for editing, but please apply for an account if you wish to contribute in the future.
  • You will find help on how to contribute to this wiki at How to Edit.
  • If you need to consult others, please use the Cumulus Wiki suggestions forum.

Please be aware that information on this page may be incorrect.

The following table has some gaps to fill in, needs a contributor who uses this type of weather station

  • Introduced in a Legacy version
  • File Section is [Station]
  • MX Section is "Instromet Settings" or "Instromet Advanced Options" as indicated
  • Only "Shown on Settings page" if either "Type=5" or "Type=7"
Parameter Line Entry MX Section Label on Settings page Default Description
ComportName=xxxxxx Station Settings → Instromet Settings Serial port name /dev/ttyUSB0 (on Linux), COM1 (on Microsoft Windows) Only required if your station is connected via a real, or virtual, serial port
ImetBaudRate=19200 Station Settings → Instromet Settings Serial Baud Rate (DavisBaudRate) 19200 Some ?older? Instromet loggers operate at 115200, if you have one of these older loggers you will need to reset this value
"SyncDavisClock=0" and "ClockSettingHour=4" Station Settings → Instromet Advanced Options "Sychronise Station Clock" and "Clock sync hour" Tick box not selected, data box set to 4 Note despite the name of the parameter within 'Cumulus.ini', this does apply to Instromet stations.
  • Simple tick or not
    • Tick (value shown as 1 in Cumulus.ini) for MX to attempt to sychronise the Instromet Station Clock with your computer time. This ensures that when Cumulus asks the station for data since time X, both recognise X as representing same time!
    • Don't tick (value shown as 0 in Cumulus.ini) if you don't want MX to attempt to keep station clock in line with computer clock
  • Box taking an integer
    • The hour of the day when, if enabled, Cumulus will set the Instromet clock to within a minute of the same time as the computer. This will happen at a default time of 04:00 each day, (4 a.m.) unless the setting box is edited
ImetUpdateLogPointer=1 Station Settings → Instromet Advanced Options Update logger pointer 1 (enabled) Simple tick or not
  • Tick (value shown as 1 in Cumulus.ini) for MX to update the memory pointer to the last record after every 30 data reads
  • Don't tick to disable this action
ImetWaitTime=500 Station Settings → Instromet Advanced Options Delay between sending data read commands 500 Specifies the time in milliseconds that Cumulus waits after one read, before it does the next read from an Instromet station. According to the specification, 500 ms is the absolute maximum time that the station should take to respond to any command. For Cumulus 1, the default was 200 milli-seconds, so you might try that too.
ImetReadDelay=500 Station Settings → Instromet Advanced Options Delay after sending a command before trying to read data from the serial port 500 Specifies the time in milliseconds that Cumulus allows after sending a command before it tries to read data on the serial port. According to the specification, 500 ms is the absolute maximum time that the station should take to respond to any command. For Cumulus 1, the default was 200 milli-seconds, so you might try that too.


LaCrosse stations

Crystal Clear info.png This document is 'Work In Progress' so content may not be complete.

Request for help from Wiki Readers

  • Do you understand how MX works?
  • Do you use hardware, or MX functionality, that is not yet documented? Can you begin that documenting?
  • Can you contribute simple text for novice users, examples of what you have done, correction of typing or factual errors, or supply missing details?
  • Will you make this page more useful by bringing content up-to-date as new releases change some information written for older releases?
  • Does any page need a section for novices, so they don't need to read more technical information further down that page?
  • Is there some information on this page, that should be on a separate page? Can you create the new page and move the less relevant information off this page, don't forget this page needs a link to the new page so people who expect to find it here know where it has moved to?

If you plan on contributing to the Wiki, then you will need an account.

  • Please use the Request Account form to apply for an account. Note that the Wiki is currently undergoing restructuring and is largely locked for editing, but please apply for an account if you wish to contribute in the future.
  • You will find help on how to contribute to this wiki at How to Edit.
  • If you need to consult others, please use the Cumulus Wiki suggestions forum.

Please be aware that information on this page may be incorrect.

The following table has some gaps to fill in, needs a contributor who uses this type of weather station


Parameter Line Entry Shown on Settings page? File Section Introduced MX Section Label on Settings page (mostly in Alarm column) Default Description
LCMaxWind=X Shown only if La Crosse was selected as station type [Station] 3.12.0 Depends on release:
  • (Version 1.8.8 Build 874 to release 3.11.4) Need to edit manually in file directly
  • (Release 3.12.0 onwards) Station Settings → Common Options → Advanced Options
La Crosse max wind speed ??? It is setting for the La Crosse max wind speed, where X is the maximum (before calibrated by any definitions in Offsets) wind speed in m/s that you want to allow. The value you supply should be in metres/second, regardless of what wind unit you are using in Cumulus

It is assumed that most parameters remain same

Oregon Scientific WM918/WMR928 Settings

The Oregon Scientific code has not changed since the earliest beta MX (3.0.0) builds based on moving compiled code from Cumulus 1.

It appears very few current Cumulus users own these obsolete models, so all these settings have to be added directly into the file, you can't edit them in the admin interface, and they will be missing from any configuration file created by any MX release.

  • Introduced for legacy Cumulus, and unchanged by MX
  • File Section is [Station], these settings need to be manually entered into file below that section heading
Parameter Line Entry External to MX edit Default Description
[Station] Section name - the following parameters appear in Station section
Humidity98Fix=0 Stop MX and add this into file 0 (disable) Applies to weather station types that never report more than 98% relative humidity.
  • 0 = Disabled (default)
  • 1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98%. Normally only useful for Oregon Scientific stations.
LogExtraSensors=0 Stop MX and add this into file 0 (disable) This setting determines whether MX looks for readings from extra temperature probes etc.
  • 0=Disabled (default)
  • 1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors..
WMR928TempChannel=N Stop MX and add this into file (by default no extra sensors) for WMR-928 stations (and other serial stations using the same protocol, eg WMR-968) to use an 'extra' channel (see previous parameter) as your main temperature sensor, set N to the required channel
WMR200TempChannel=N Stop MX and add this into file (by default no extra sensors) for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel

Units, Derivative Options, and Decimal Places

For altitude units, please see #Location.

  • File Section is [Station]
  • Edit on Station Settings page (except where indicated in bold as another page)
Parameter Line Entry Introduced MX Section Label on Settings page Default Description
AirQualityDecimals=1 Release 3.9.2 Units → Advanced Options (Here be dragons!) Air Quality decimals 1 (displayed as blank) Number of decimal places for all outputs
AvgBearingMinutes=10 Legacy Cumulus Common Options → Advanced Options (Here be dragons!) Average Bearing Minutes 10 (minutes) This parameter's value is the number of minutes over which Cumulus calculates (by treating the wind as a vector and taking into account the speed as well as direction) its average bearing
AvgSpeedMinutes=10 Legacy Cumulus Common Options → Advanced Options (Here be dragons!) Average Speed Minutes 10 (minutes) This parameter's value is the number of minutes over which Cumulus averages out reported current wind speeds
CalculatedDP=0 Legacy Cumulus Common Options Calculate dew point Unticked (shown as 0 in Cumulus.ini) Simple tick or not:
  • Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate dew point from temperature and humidity supplied by station
  • Don't tick (value shown as 0 in Cumulus.ini) action depends on Calibration settings
    • If Cumulus has non-default multiplier and/or offset settings for temperature or humidity, Cumulus will calculate dew-point. This avoids the restriction in the Oregon Scientific stations where the dew point can never be below freezing point.
    • If station provides dew point, then that will be used provided no multiplier/offsets have been specified for temperature or humidity
CalculatedWC=1 Legacy Cumulus Common Options Calculate wind chill Unticked (shown as 0 in Cumulus.ini) Simple tick or not:
  • Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate wind chill from temperature and wind speed
    • Note that there is a maximum temperature, and minimum wind speed, for Cumulus to make the calculation, see Wind_chill page
  • Don't tick (value shown as 0 in Cumulus.ini) action depends on other items:
    • If Cumulus has non-default multiplier and/or offset settings for temperature or wind speed, Cumulus will calculate wind chill
    • If station does NOT make a wind chill value available to Cumulus, Cumulus MX reports an error if you have not ticked this setting, (that is different to how the setting worked with the legacy software).
    • If station provides wind chill, then that value will be used provided no multiplier/offsets have been specified for temperature or wind speed.
ChillHourSeasonStart= Legacy Cumulus Chill Hours Chill Season Starts Default depends on release
  • (up to 3.11.4) 10 = October
  • (from 3.12.0) 4 in Southern hemisphere, 10 in Northern hemisphere
The value to enter is the month number (1=January, 12=December) and the Cumulative Chill Hours Count is reset to zero on the first of the selected month
ChillHourThreshold= Legacy Cumulus Chill Hours Chill Hours Default depends on Temperature Units
  • Either 45 degrees Fahrenheit (equivalent to 7.22 oCelsius)
  • Or 7 degrees Celsius (equivalent to 44.6 oFahrenheit)
Chill Hours are incremented by the number of (fractional) hours that the air temperature is below the threshold. In practice, Cumulus simply detects if the current temperature is below the threshold and adds an increment equivalent to the (interval) time passed since the last temperature reading.
  • You can put in any value you want, with a decimal place if required
  • Some people have put in the freezing-point temperature (0oC or 32 oF) and they relabel "chill hours" to "frost hours"
CloudBaseInFeet=0 Legacy Cumulus (As at 3.11.4, can only adjust in the file) 0 (default in MX is metres) Select units used for reporting theoretical cloud base:
  • 0 = metres (default if file created by MX)
  • 1 = feet (default if file created by legacy software)
ErrorLogSpikeRemoval=1 Legacy Cumulus Calibration Settings → Final tick box Log spike and limit violations to error log 1 (default in MX is enabled) Log spike and limit violations to error log (in MX this is in MXdiags folder):
  • 1 = do log (default if file created by MX)
  • 0 = don't log (default if file created by legacy software)
HourlyForecast=1 Legacy Cumulus Forecast Update forecast hourly 1 (default in MX is enabled) When Cumulus derives its Zambretti forecast

Simple tick or not:

  • Tick (value shown as 1 in Cumulus.ini) then MX will derive a Zambretti forecast just once an hour, on the hour
  • Don't tick (value shown as 0 in Cumulus.ini) to derive a forecast every time MX does a process of the pressure reading
Humidity98Fix=0 Legacy Cumulus Common Options Max humidity 0 (disable) For any weather station that never reports a relative humidity greater than 98%

Simple tick or not:

  • Tick (value shown as 1 in Cumulus.ini) then if weather station reading is 98%, process that as 100% for all outputs from MX
  • Don't tick (value shown as 0 in Cumulus.ini) to always report what weather station reports for relative humidity
PeakGustMinutes=10 Legacy Cumulus Common Options → Advanced Options (Here be dragons!) Peak wind gust time 10 (minutes) MX waits until a gust has been measured for number of minutes specified by value of parameter, before checking whether previous gust extreme record have been exceeded
PressDecimals=1 Release 3.9.2 Units → Advanced Options (Here be dragons!) Pressure decimals Default depends on Pressure Units (displayed as blank)
  • default is 1 if units are hPa or mb
  • default is 2 if units are inches of mercury
Number of decimal places for all outputs
PressureUnit=1 Legacy Cumulus Units Pressure Depends on release:
  1. Legacy to 3.11.4: 0 (mbar)
  2. 3.12.0 onwards: 1 (hPa)
Drop-down:
  • 0 = millibar (mb)
  • 1 = hectoPascals (hPa)
  • 2 = inches of mercury (in Hg)
RainDayThreshold= Legacy Cumulus Common Options → Advanced Options Rain day threshold Default is -1 which depends on Rainfall Units AND station type
  • -1 = normally 0.2 if units are millimetres
  • -1 = normally 0.01 if units are inches
  • Otherwise enter a value in your selected units
For derivatives like count of consecutive wet/dry days, any daily rainfall less than this threshold will be ignored.

(If rainfall is measured in tips, usually set to just over one tip, as first tip of day might be result of less that one tip accumulated on earlier days or because of dew)

RainDecimals=1 Release 3.9.2 Units → Advanced Options (Here be dragons!) Rainfall decimals Default depends on Rainfall Units (displayed as blank)
  • default is 1 if units are millimetres
  • default is 2 if units are inches
Number of decimal places for all outputs
RainSeasonStart=1 Legacy Cumulus Annual Rainfall Start of rainfall season 1 (Jan) Drop-down
  • 1 = January
  • 2 = February
  • 3 = March

...

  • 9 = September
  • 10 = October
  • 11 = November
  • 12 = December

Added in late 2010 because Cumulus users in Israel said they do not total rainfall from January.

It was welcomed by people outside Israel, it turned out growers are often interested in a growing season rainfall total

RainUnit=0 Legacy Cumulus Units Rain 0 (mm) Drop-down:
  • 0 = millimetres
  • 1 = inches
RoundWindSpeed=0 Legacy Cumulus Common Options Rounding of wind speed 0 (no) Simple tick or not, (only applicable if any reported wind speed would otherwise include decimal places):
  • Tick (value shown as 1 in Cumulus.ini) then Cumulus will round all the wind speeds it reports to nearest integer
  • Don't tick (value shown as 0 in Cumulus.ini) then Cumulus will report wind speeds to the precision defined in "WindSpeedDecimals", "WindSpeedAvgDecimals", and "WindRunDecimals", parameters
SunshineHrsDecimals=2 Release 3.8.0 Units → Advanced Options (Here be dragons!) Sunshine hours decimals 2 (displayed as blank) Select a number of decimal places to overwrite the default
TempDecimals=1 Release 3.9.2 Units → Advanced Options (Here be dragons!) Temperature decimals 1 (displayed as blank) Select a number of decimal places to overwrite the default
TempUnit=0 Legacy Cumulus Units Temperature 0 (oC Drop-down:
  • 0 = Celsius
  • 1 = Fahrenheit
UseCumulusForecast=0 Legacy Cumulus Forecast Use Cumulus Forecast 0 (disabled) Simple tick or not:
  • Tick (value shown as 1 in Cumulus.ini) then Cumulus will generate a simple weather Zambretti forecast, if your station does not supply a forecast, or as an alternative to the one supplied by your station. Please see Forecast_webtag for details.
  • Don't tick (value shown as 0 in Cumulus.ini) then MX will not do any forecasting, so it will return "not available" unless your weather station provides an alternative forecast
UseCumulusPresstrendstr=0 Legacy Cumulus Common Options Cumulus pressure trend names 0 (depends on weather station type) Simple tick or not:
  • Tick (value shown as 1 in Cumulus.ini) then MX will generate the name for the current pressure trend, e.g. "Falling", "Rising quickly" etc, instead of the one supplied by your station. The names used are those in the UK Shipping Forecast, but can be modified using strings.ini.
  • Don't tick (value shown as 0 in Cumulus.ini) then effect depends on whether your weather station supplies pressure trends
    • If your station does supply pressure trends, then MX will use those
    • If your station does not supply pressure trends, then MX will generate the name for the current pressure trend, e.g. "Falling", "Rising quickly" etc, instead of the one supplied by your station. The names used are those in the UK Shipping Forecast, but can be modified using strings.ini.
UseSpeedForAvgCalc=0 Legacy Cumulus Common Options Use speed for average calculation 0 (disable) Simple tick or not:
  • Tick (value shown as 1 in Cumulus.ini) then MX will use what the weather station supplies as "wind speed" to calculate the average wind speed.
  • Don't tick (value shown as 0 in Cumulus.ini) then MX will use what the weather station supplies as "latest wind speed" to calculate the average wind speed

Please see Wind_measurement#Weather_Stations_and_Cumulus for more details.

UseZeroBearing=1 Legacy Software Common Options Use bearing zero when calm 1 (enable) Simple tick or not:
  • Tick (value shown as 1 in Cumulus.ini) then MX will report a wind bearing of zero when the wind is calm
  • Don't tick (value shown as 0 in Cumulus.ini) then MX will continue to report the last wind bearing when the wind stops blowing
UVDecimals=1 Release 3.9.2 Units → Advanced Options (Here be dragons!) Ultra Violet decimals 1 (displayed as blank) Select a number of decimal places to overwrite the default
Wind10MinAverage=0 Legacy Cumulus Common Options Calculate average wind speed 0 (disable) Simple tick or not:
  • Tick (value shown as 1 in Cumulus.ini) then MX will calculate an average wind speed (over ten minutes) as defined by "UseSpeedForAvgCalc" parameter
  • Don't tick (value shown as 0 in Cumulus.ini) then MX will use whatever the weather station provides as an average wind speed

Please see Wind_measurement#Weather_Stations_and_Cumulus for more details.

WindRunDecimals=1 Release 3.9.2 Units → Advanced Options (Here be dragons!) Wind run decimals 1 (displayed as blank) Select a number of decimal places to overwrite the default
WindSpeedAvgDecimals= Release 3.8.3 Units → Advanced Options (Here be dragons!) Wind speed average decimals (displayed as blank) Select a number of decimal places to overwrite the default. (NOTE: If the weather station does not provide an average wind speed, or if the user requires a change of units from how the weather station reports it, then CMX will calculate it to 1 decimal place by default; otherwise average wind speed will default to integer, or to one decimal place, depending how it is provided by the station).
WindSpeedDecimals= Release 3.8.3 Units → Advanced Options (Here be dragons!) Wind speed average decimals (displayed as blank) Select a number of decimal places to overwrite the default which depends both on the weather station type and what units have been selected by user (speeds are normally reported as integers unless metres per second are reporting unit, because most sensors are not precise enough to give any decimal places in other units)
WindUnit=0 Legacy Cumulus Units Wind Default depends on release:
  • Legacy to 3.11.4: 0 (m s-1)
  • 3.12.0 onwards: 2 (km hr-1)
Drop-down:
  • 0 = metres per second
  • 1 = miles per hour
  • 2 = Kilometres per hour
  • 3 = Knots (nautical miles per hour or kts)
YTDrain=0 Legacy Cumulus Annual Rainfall Year-to-date amount 0 (displayed as blank) Enter the amount of rainfall to be added to the calendar year in next parameter (used when start using Cumulus in middle of year)
YTDrainyear= Legacy Cumulus Annual Rainfall Year to which year-to-date amount applies (displayed as blank) Enter a 4 digit year:
  • Legacy Releases (1.7.12 from 5 July 2008) and MX up to 3.11.4 (build 3133 from 25 May 2021): The year-to-date amount in previous parameter is added to the current (seasonal) rain if the year specified in this parameter matches the current year.
    • If your rain season starts in January (default) then set this to the calendar year when you first use Cumulus (in a particular location).
    • If your rain year starts in any other month, set this to the current calendar year during your first season (remember to change the year mid-season when reach 1 January), and delete the year when your second season starts as you don't want the previous value added to your second season
  • From Release 3.12.0 (29 July 2021), the current calendar year is compared against (current month - season start month + 1) year, so you enter the year in which your first season would start had it been a full season (be that last calendar year or this calendar year)