Cumulus.ini (preserving history)

From Cumulus Wiki
Revision as of 05:14, 28 August 2009 by Shamrockspider (talk | contribs)
Jump to navigationJump to search

The cumulus.ini configuration file is a text file containing initialization parameters used by the Cumulus application. It is located in the directory in which you installed Cumulus and is updated whenever you change any configuration parameters from the application configuration pages. Cumulus also re-writes the file when it shuts down, so if you want to edit the file yourself, make sure Cumulus is stopped.

INI Line Entry Function
[Station] Section name - the following parameters relate to the station location.
Type=-1 Station Type as set by the checked radio box in the Station Configuration Screen Station Type block
  • 0=Vantage Pro
  • 1=Vantage Pro2
  • 2=WMR-928
  • 3=WM-918
  • 4=EasyWeather (using .dat file)
  • 5=Fine Offset/Watson/MyDel etc
  • 6=WS2300
Model="yourModel" Whatever you have entered for Station Model on the Station Configuration Screen Settings block.
Port=0 Com port in your computer which is connected to your weather station if connected via a serial port. Defaults to port 0.
Latitude=0 Latitude in Decimal Degrees based on what you have entered for Latitude Degrees, Minutes, Seconds in the Station Configuration Screen Location block

Positive for North, Negative for South

Longitude=0 Longitude in Decimal Degrees based on what you have entered for Longitude Degrees, Minutes, Seconds in the Station Configuration Screen Location block

Positive for East, Negative for West

LatTxt= Latitude in text string format of hemisphere degrees minutes and seconds. HTML ampersand codes are used for spaces and DMS characters.
LonTxt= Longitude in text string format of hemisphere degrees minutes and seconds. HTML ampersand codes are used for spaces and DMS characters.
Altitude=0 your station altitude as entered in the Station Configuration Screen Location block.
AltitudeInFeet=1 Altitude measurement unit as set in the Station Configuration Screen Location block.
  • 0 = meters ASL
  • 1 = feet ASL
Humidity98Fix=0 Selected in the Station Configuration Screen Settings block.
  • 0 = Disabled (default)
  • 1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98% or greater. Normally only useful for Oregon Scientific stations.
Wind10MinAverage=0 Selected in the Station Configuration Screen Settings block.
  • 0 = Disabled (default)
  • 1 = Enabled, Cumulus will calculate and display a 10-minute average wind speed instead of using the value supplied by the station.
CalculatedDP=0 Selected in the Station Configuration Screen Settings block.
  • 0 = Disabled
  • 1 = Enabled, Cumulus will calculate the dew point instead of using the value supplied by the station. This avoids the restriction in the Oregon Scientific stations where the dew point can never be below freezing point.
CalculatedWC=0 Selected in the Station Configuration Screen Settings block.
  • 0 = Disabled
  • 1 = Enabled, Cumulus will calculate the wind chill instead of using the value supplied by the station. Note that some stations (Fine Offset, for example, do not supply a wind chill value anyway, so Cumulus always calculates it). You should set this if you have specified any calibration values for wind or temperature, so that Cumulus can also apply those values to the wind chill.
RolloverHour=0 Log roll over time as selected on the Station Configuration Screen
  • 0 = midnight
  • 9 = 9am
Use10amInSummer=1 Daylight saving correction for 9am roll over
  • 0 = Use 10am in summer not checked on Station Configuration Screen
  • 1 = Use 10am in summer selected on Station Configuration Screen
ConfirmClose=0 Confirm you wish to close Cumulus application after telling it to close
  • 0 = Disabled, application will close immediately
  • 1 = Enabled, application will prompt for conifirmation that you wish to close it
CloseOnSuspend=1 If this is selected, Cumulus will close if you suspend/standby/hibernate your computer. You should not select 'Confirm shutdown' if you use this option.
  • 0 = Disabled, application will not close if you suspend/standby/hibernate your computer
  • 1 = Enabled, application will close on suspend/standby/hibernate of your computer
RestartIfUnplugged=0 Cumulus will restart if it detects that a Fine Offset station is unplugged.
  • 0 = Disabled
  • 1 = Enabled
SyncDavisClock=0 When set, at start-up, Cumulus will set the Davis VP/VP2 clock to the same time as the PC
  • 0 = Disabled
  • 1 = Enabled
DataLogInterval=2 Data log interval as selected in the Station Configuration Screen Data log interval block
  • 0 = 1 min
  • 1 = 5 mins
  • 2 = 10 mins
  • 3 = 15 mins
  • 4 = 20 mins
  • 5 = 30 mins
WindUnit=0 Wind measurement unit Cumulus records in as selected in the Station Configuration Units block
  • 0 = m/s
  • 1 = mph
  • 2 = km/h
  • 3 = kts
PressureUnit=0 Pressure measurement unit Cumulus records in as selected in the Station Configuration Units block
  • 0 = mb
  • 1 = hPa
  • 2 = in
RainUnit=0 Rain measurement unit Cumulus records in as selected in the Station Configuration Units block
  • 0 = mm
  • 1 = in
TempUnit=0 Temperature measurement unit Cumulus records in as selected in the Station Configuration Units block
  • 0 = Centigrade
  • 1 = Fahrenheit
LocName= Location Name as entered on in the Station Configuration Screen
LocDesc= Location Description as entered in the Station Configuration Screen
StartDate=13/08/2009 The date at which your records commenced. By default this will set to the date of initial installation of the application.
WindComp=1
LastLoggerDownload=13/08/2008 12:48:52 The date/time of the last down load from your weather station (note: no longer used)
YTDrain=0 Year to date correction if starting part way through year as entered in the Station Configuration Screen. Default is 0.
YTDrainyear=0 The year for which the YTDrain is to be applied. Default is 0
EWInterval=0 Easyweather interval in minutes as entered in the Station Configuration Screen Settings block.
EWFile= Easyweather.dat file path/name as entered in the Station Configuration Screen Settings block.
UseDataLogger=1 If selected, at start-up, Cumulus will download data from the stations data logger (if it has one) to catch up from the point where Cumulus was last shut down.
  • 0 = Disabled
  • 1 = Enabled (Default)
UseCumulusForecast=0 From the Station Configuration Screen Forecast block, if selected Cumulus will generate a simple weather forecast, if your station does not supply one, or as an alternative to the one supplied by your station.
  • 0 = Disabled (default)
  • 1 = Enabled
UseCumulusPresstrendstr=0 Set in the Station Configuration Screen Settings block. If selected Cumulus will generate the name for the current pressure trend, e.g. "Falling", "Rising quickly" etc, instead of the one supplied by your station. The names used are those in the UK Shipping Forecast. Note that some stations do not supply this anyway, so setting this has no effect (Cumulus always generates the names for those stations).
  • 0 = Disabled
  • 1 = Enabled
FCpressinMB=1 Forecast pressure unit as selected in Station Configuration Forecast block
  • 0 = inches
  • 1 = mb
FClowpress=950 Low Pressure extreme limit as entered in the Station Configuration Forecast block. Default is 950mb
FChighpress=1050 High Pressure extreme limit as entered in the Station Configuration Forecast block. Default is 1050mb
ForceVPBarUpdate=0 Set this in the Station Configuration Screen Settings block. Select to force the Vantage Pro (and Pro2) barometer to update once a minute instead of the default 15 minutes. Note that you may not need this, more recent stations already update every minute
  • 0 = Disabled
  • 1 = Enabled
UseZeroBearing=0 Set this in the Station Configuration Screen Settings block.
  • 0 = Disabled, Cumulus displays the current bearing read from the station (i.e. the last direction the wind was blowing from before it became calm). Note that the average wind bearing will always display zero bearing if there has been no wind for the last 10 minutes, as the average bearing takes wind speed into account.
  • 1 = Enabled, Cumulus display a bearing of zero (and '---' for the compass point) when the wind is calm
VP2ConnectionType=0 Weather station connection type as selected in the Station Configuration Screen VP type block
  • 0 = serial
  • 1 = usb
  • 2 = TCP/IP
VP2TCPPort=22222 Comunications port used if VP type has TCP/IP selected. Default is 2222
VP2IPAddr=0.0.0.0 Weather station IP address if VP type has TCP/IP selected. Default is 0.0.0.0
WarnMultiple=0
CloudBaseInFeet=1 Cloud base measurement unit
  • 0 = meters
  • 1 = feet (default)
[Web Site] Section Name - the following parameters replate to your website
ForumURL=http://sandaysoft.com/forum/ Your website URL
WebcamURL=http://www.sanday.org.uk/webcam/webcam.php URL for your Webcam
[FTP site] Section Name - the following parameters relate to your website FTP parameters
Host= This is the name (or the IP address) of the ftp server which you connect to when you upload pages to your web site
Port=21 Port used for FTP upload, default =21
Username= your web site FTP login Username as entered in the Internet Configuration Screen
Password= your web site FTP login password as entered in the Internet Configuration Screen (note: this is not encrypted)
Directory= Directory (including path)on your server to which FTP will upload the files
AutoUpdate=0 Set in the Internet Configuration Screen Web Settings block.
  • 0 = Disabled
  • 1 = Enabled, Cumulus will automatically upload your updated web pages to your web site at regular intervals (as specified by the 'Update Interval')
ActiveFTP=0 Set in the Internet Configuration Screen Web Settings block.
  • 0 = Disabled
  • 1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
EnableRealtime=0 Set in the Internet Configuration Screen Web Settings block.
  • 0 = Disabled
  • 1 = Enabled, Cumulus will upload a file called realtime.txt to your web site, at the interval specified by Realtime Interval (see below). This file contains various weather parameters and is used by the CumulusRealtime.swf real time wind gauges (as on the supplied 'gauges' web page. If you don't have this option selected, but do have the 'auto update' option set (and a suitable interval configured), Cumulus will still create the realtime.txt file at the specified Interval (not the Realtime Interval) so that you can specify it as an extra file to upload during the 'normal' upload, or use it for any other purpose on your PC.
RealtimeInterval=3000 Set in the Internet Configuration Screen Web Settings block. The time in seconds between uploads of the realtime.txt file.
UpdateInterval=15 Set in the Internet Configuration Screen Web Settings block. The interval in minutes at which you wish auto updates to occur.
IncludeSTD=1 Selected in the Internet Configuration Files Tab screen
  • 0 = Disabled
  • 1 = Enabled, (default) the standard web files provided with Cumulus will be processed and uploaded at each web update.
IncludeSTDImages=1 Selected in the Internet Configuration Files Tab screen
  • 0 = Disabled
  • 1 = Enabled,(default) the standard image files generated by Cumulus (graphs, etc) will be uploaded at each web update.
FTPRename=0 Selected in the Internet Configuration Files Tab screen
  • 0 = Disabled
  • 1 = Enabled,
DeleteBeforeUpload=0 Selected n Internet Configuration Screen Sites/Options tab Web Settings block
  • 0 = Disabled default
  • 1 = Enabled, files are deleted from sever before the new update is loaded
ResizeGraphs=0 Selected in the Internet Congfiuration Screen Web graphs block.
  • 0 = Disabled (default) Cumulus uploads the default 750 x 300 pixel graphs.
  • 1 = Cumulus resizes the large graph images when creating them for upload to your web site. Specify the required height and width in the corresponding boxes. Note that the images are simply scaled to the new size; there will be some loss of quality
GraphHeight=300 Graph height, default is 300 (pixels)
GraphWidth=750 Graph width, default is 750 (pixels)
ImageFolder= Path and file name of folder to which the image files are copied at each web update interval, either the 'normal' interval, or the 'realtime' interval, depending on whether or not the 'realtime?' box is ticked.
ImageCopyRealtime=0 Selected in the Internet Configuration File tab screen
  • 0 = files copied in 'normal' interval each web update (default)
  • 1 = files copied in 'real time' interval.
ExtraLocal0= Path and file name on local computer for alternate file #0. Set in Internet Configuration Screen Files tab.
ExtraRemote0= Path and file name on web server for alternate file #0. Set in Internet Configuration Screen Files tab.
ExtraProcess0=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that.
ExtraBinary0=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime0=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP0=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal1= Path and file name on local computer for alternate file #1. Set in Internet Configuration Screen Files tab.
ExtraRemote1= Path and file name on web server for alternate file #1. Set in Internet Configuration Screen Files tab.
ExtraProcess1=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary1=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime1=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP1=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal2= Path and file name on local computer for alternate file #2. Set in Internet Configuration Screen Files tab.
ExtraRemote2= Path and file name on web server for alternate file #2. Set in Internet Configuration Screen Files tab.
ExtraProcess2=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary2=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime2=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP2=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal3= Path and file name on local computer for alternate file #3. Set in Internet Configuration Screen Files tab.
ExtraRemote3= Path and file name on web server for alternate file #3. Set in Internet Configuration Screen Files tab.
ExtraProcess3=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary3=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime3=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP3=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal4= Path and file name on local computer for alternate file #4. Set in Internet Configuration Screen Files tab.
ExtraRemote4= Path and file name on web server for alternate file #4. Set in Internet Configuration Screen Files tab.
ExtraProcess4=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary4=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime4=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP4=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal5= Path and file name on local computer for alternate file #5. Set in Internet Configuration Screen Files tab.
ExtraRemote5= Path and file name on web server for alternate file #5. Set in Internet Configuration Screen Files tab.
ExtraProcess5=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary5=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime5=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP5=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal6= Path and file name on local computer for alternate file #6. Set in Internet Configuration Screen Files tab.
ExtraRemote6= Path and file name on web server for alternate file #6. Set in Internet Configuration Screen Files tab.
ExtraProcess6=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary6=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime6=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP6=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal7= Path and file name on local computer for alternate file #7. Set in Internet Configuration Screen Files tab.
ExtraRemote7= Path and file name on web server for alternate file #7. Set in Internet Configuration Screen Files tab.
ExtraProcess7=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary7=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime7=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP7=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal8= Path and file name on local computer for alternate file #8. Set in Internet Configuration Screen Files tab.
ExtraRemote8= Path and file name on web server for alternate file #8. Set in Internet Configuration Screen Files tab.
ExtraProcess8=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary8=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime8=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP8=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
ExtraLocal9= Path and file name on local computer for alternate file #9. Set in Internet Configuration Screen Files tab.
ExtraRemote9= Path and file name on web server for alternate file #9. Set in Internet Configuration Screen Files tab.
ExtraProcess9=0 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
  • 1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
ExtraBinary9=0 Set in Internet Configuration Screen Files tab.
  • 0 = not binary (e.g. HTML file)
  • 1 = Binary (e.g. images)
ExtraRealtime9=0 Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
  • 0 = Disabled, (default) file uploaded as part of normal upload
  • 1 = Enabled, file uploaded during Realtime upload
ExtraFTP9=1 Set in Internet Configuration Screen Files tab.
  • 0 = Disabled, File copied to the location specified in the Remote Filename box.
  • 1 = Enabled, (default) File uploaded by FTP
[Display] Section heading - the following parameters affect the way things are displayed.
Heading=My Weather Title Heading on the Main Screen. Set in the Display Configuration Screen General block
MinimizeToTray=0 Set in the Display Configuration Screen General block
  • 0 = Disabled (default)
  • 1 = Enabled, causes Cumulus to appear as an icon in the system tray when it is minimized. The icon will flash if a record is broken or an error occurs. Double click on the icon to restore the main window (or right click on the icon and use the pop-up menu).
ForecastCentred=0 Set in the Display Configuration Screen General block.
  • 0 = Disabled, (default) Forecast appears left justified on main screen
  • 1 = Enabled, Forecast appears centred on main screen
FontColour=4227327 Decimal code for the screen font color
BackColour=12632256 Decimal code for the application background color
HeadingColour=10485760 Decimal code for the screen heading color
ClockColour=-16777201 Decimal code for the main screen clock background color (
DisplaySolarData=0 Set in the Display Configuration Screen General block.
  • 0 = Disabled (default)
  • 1 = causes Vantage Pro solar data (ET, UV and Solar radiation) to be displayed on the main screen (if supported by the station), or extra sensor data in the case of Oregon WMR-928 stations.
DisplayCloudBase=0 Set in the Display Configuration Screen General block.
  • 0 = Disabled, (default)
  • 1 = Enabled, the calculated cloud base is displayed on the main screen. The calculation is a simple one; 1000 feet for every 4.5 degrees Fahrenheit difference between the temperature and the dew point.
TwelveHourClock=0
WMR928Channel1Caption=Extra channel 1 Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
WMR928Channel2Caption=Extra channel 2 Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
WMR928Channel3Caption=Extra channel 3 Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
WindGaugeRange=50 Sets the default full scale deflection of the wind speed gauge
SnowUnitText=cm Snow measurement unit. Default is cm
DisplayHumidex=0 Set in the Display Configuration Screen General block
  • 0 = Disabled (default) Heat Index displayed on main screen.
  • 1 = Enabled, calculated Humidex value to be displayed on the main screen instead of Heat Index. Note that Cumulus displays degrees C or F for Humidex, whereas strictly speaking it is unitless. This is for the convenience of those who use Fahrenheit but would still prefer to see Humidex displayed, where it might be confusing to show the unconverted value.
[Wunderground] Section Name - Parameters for your Weather Underground site
ID= Your Weather Underground station identifier (note: not your user name).
Password= Your Weather Underground password. (note: not encrypted)
Enabled=0 Set if you wish to upload to your Weather Underground site
  • 0 = Disabled, (default) no Weather underground site
  • 1 = Enabled, data sent at the interval specified below
RapidFire=0 'rapid fire' mode.
  • 0 = Disabled (default)
  • 1 = Enabled, You should also tick 'Enabled'. Rapid fire updates occur every 5 seconds.
Interval=15 Time in minutes between uploads to Weather Underground. (default = 15)
SendUV=0 Current UV value
  • 0 = Disabled (default) no UV info sent
  • 1 = Enabled, UV value sent with the data
SendSR=0 Solar Radiation
  • 0 = Disabled (default) no solar data sent
  • 1 = Enabled, Solar Radiation value sent with data
[Twitter] Section Name - the following parameters relate to your Twitter site parameters
User= your Twitter login username
Password= your Twitter login password (note: this is not encrypted)
Enabled=0
Interval=10 interval in minutes that Tweats will be sent.
[PWSweather] Section Name - the following parameters relate to your PWS weather site parameters
ID= Your PWS Weather station identifier (note: not your user name)
Password= your PWS weather site login password (note: this is not encrypted)
Enabled=0
Interval=15 Interval in minutes that updates will be sent to your PWS weather site
SendUV=0
SendSR=0
[APRS] Section Name - the following parameters relate to your APRS weather site parameters
ID=
pass=-1
server=cwop.aprs.net
port=14580
Enabled=0
Interval=9
[Graphs] Section Name - the following parameters relate to your graph settings
GraphHours=12 The number of hours data (12 or 24) to be displayed in each graph
Background=12632256 Decimal value for the Graph background color.
WindColour=65535 Decimal value for the 10 minute average wind speed plot color
GustColour=8421376 Decimal value for the Wind Gust plot color
RainColour=9527753 Decimal value for the Rain plot color
RainTodayColour=9527753 Decimal value for the Rain Today plot color
TempColour=9527753 Decimal value for the Temperature plot color
HeatIndexColour=16711680 Decimal value for the Heat Index plot color
PressColour=9527753 Decimal value for the Pressure plot color
WindDirColour=255 Decimal value for the Wind Direction plot color
DewPointColour=255 Decimal value for the Dew Point plot color
WindChillColour=32768 Decimal value for the Wind Chill plot color
MinTempColour=16711680 Decimal value for the Minimum Temperature plot color
MaxTempColour=255 Decimal value for the Maximum Temperature plot color
AvgTempColour=32768 Decimal value for the Average Temperature plot color
DailyRainColour=32768 Decimal value for the Daily Rain plot color
InsideTempColour=0 Decimal value for the Inside Temperature plot color
InsideHumColour=255 Decimal value for the Inside Humidity plot color
OutsideHumColour=16711680 Decimal value for the Outside Humidity plot color
Graph3D=0 3D or normal graph selection as selected in the Display Configuration Graphs block
  • 0 = normal graph selected
  • 1 = 3D graph selected
PlotLatestGust=0 Plot Latest Gust selection as selected in the Display Configuration Graphs block
  • 0 = Disabled
  • 1 = Enabled
OriginIsSouth=0
[Alarms] Section Name - the following parameters relate to your alarm settings
alarmlowtemp=0
LowTempAlarmSet=0
LowTempAlarmSound=0
LowTempAlarmSoundFile=C:\Cumulus\alert.wav
alarmhightemp=0
HighTempAlarmSet=0
HighTempAlarmSound=0
HighTempAlarmSoundFile=C:\Cumulus\alert.wav
alarmlowpress=0
LowPressAlarmSet=0
LowPressAlarmSound=0
LowPressAlarmSoundFile=C:\Cumulus\alert.wav
alarmhighpress=0
HighPressAlarmSet=0
HighPressAlarmSound=0
HighPressAlarmSoundFile=C:\Cumulus\alert.wav Path and file name for the sound file used for the High Pressure Alarm
alarmhighraintoday=0
HighRainTodayAlarmSet=0
HighRainTodayAlarmSound=0
HighRainTodayAlarmSoundFile=C:\Cumulus\alert.wav Path and file name for the sound file used for the High Rain Today Alarm
alarmhighrainrate=0
HighRainRateAlarmSet=0
HighRainRateAlarmSound=0
HighRainRateAlarmSoundFile=C:\Cumulus\alert.wav Path and file name for the sound file used for the High Rain Rate Alarm
alarmhighgust=0
HighGustAlarmSet=0
HighGustAlarmSound=0
HighGustAlarmSoundFile=C:\Cumulus\alert.wav Path and file name for the sound file used for the High Gust Alarm
alarmhighwind=0
HighWindAlarmSet=0
HighWindAlarmSound=0
HighWindAlarmSoundFile=C:\Cumulus\alert.wav Path and file name for the sound file used for the High Wind Alarm
[Offsets] Section Name - the following parameters are the correction factors for your specific sensors
PressOffset=0
TempOffset=0
HumOffset=0
WindDirOffset=0
InTempOffset=0
WindSpeedMult=1
WindGustMult=1
TempMult=1
HumMult=1
RainMult=1
[xAP] Section Name - the following parameters are used if you have enabled xAP in the Station Configuration xAP Settings block
Enabled=0
UID=4375
Port=3639