Dayfile.txt: Difference between revisions

From Cumulus Wiki
Jump to navigationJump to search
m (Updated categories, removed external editing)
m (Correcting Typos (mostly missing, but critical, colon characters in links), and mention of some more release 3.20.0 changes)
 
(38 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<big>'''This article is about the Daily Summary logging file'''</big>
{{Template:Version badge Mx}}{{Version badge 1}}This Wiki page applies to both Cumulus flavours. [[Category:Files_with_Comma_Separated_Values]]


= Introduction =
As part of a redevelopment of Wiki, this page has been simplified, by moving some content to new pages.  Old links in the support forum, that were to content no longer on this page, will bring you here.


Cumulus maintains a daily log file that holds the highs and lows of each day, as well as a few other nuggets of information. In all flavours of Cumulus, this file is only updated (with exclusive lock) during the end of meteorological day process. In that process it is also read if the generation of NOAA reports has been requested.
'''Content previously on this page has been moved as follows''':
* Explanations about Cumulus terminology can be accessed from [[:Category:Terminology]] page
* Each line in this file represents one day, but the start time need not be same for all fields,
** so please see [[Meteorological_day|Meteorological day]], and [[today.ini]] for more details about that
* Advice regarding editing this file has been moved to [[Amending dayfile]] page, this also covers date-separator issues and dealing with missing or corrupted lines
* General advice about Cumulus files with a '''.txt''' extension has been consolidated on  [[:Category:Files_with_Comma_Separated_Values]] page
* Advice about correcting any rogue extreme figures inadvertently stored in this file has been consolidated in new [[Correcting Extremes]] page
* If some lines in your file have fewer fields than other lines the advice has been consolidated on [[Calculate Missing Values]] page
** For MX there is a [[Calculate_Missing_Values#CreateMissing.exe|Create Missing Utility]], which checks spot readings in the [[Standard_log_files|MMMyylog.txt]] files, adds any missing derivative spots (e.g. heat index) and uses these figures to recalculate daily derivatives and uses those to replace missing fields/lines in dayfile.txt
** For the legacy Cumulus, there was a [[Amending_dayfile#Create_Missing_on_legacy_dayfile_editor|dayfile editor with create missing option]], that performed equivalent function
** If you import historic data from before you started using Cumulus into [[Standard log files]],
** then see [[Calculate Missing Values]] page for how to generate new lines in dayfile.txt
* Cumulus MX is more fussy, than Cumulus 1, about various formatting issues, see below, also see [[Migrating_from_Cumulus_1_to_MX#dayfile.txt]] section for more advice


In Cumulus 1 only, the figures contained in the file are used for the 'This period' display accessed from the '''View''' menu and to build any graphs based on daily values.
The content that remains on this page is summarised by the table of contents that follows.


The format of this file is the same for both Cumulus 1 and Cumulus MX, although the number of fields in the file increases in various versions as shown at the end of this article. The file can be ported between flavours only if both are run with exactly the same locale settings, as using a different locale may change the field separator or the symbol used for decimal points.
=About this file=
{{TOCright}}


* This Wiki page describes one of the  [[:Category:Cumulus Files|files]] not included in any release download. 
* This daily summary file (Steve Loft shortened that to "day" plus "file") uses a ".txt" extension, and is essentially a plain text file in CSV format.
** CSV stands for "Comma Separated Values", but in the Cumulus context the field separator can be other characters including ";" or "|"
* The file is created in [[data folder|data sub-folder]] of your Cumulus installation when Cumulus needs to store its first line in this file.
* Cumulus MX reads the whole of this file into an internal array (stored in RAM) each time you restart the software,
** Please see [[Amending_dayfile#Warning_if_editing_outside_MX|here for implications]]
** Therefore MX users who move to a different location should archive the old "dayfile.txt", to avoid any discontinuities in any graphs plotted from active file


== Changes in different releases of Cumulus ==


Be aware that this article was written for Cumulus 1, amended to also cover MX 3.0.0. Whilst the list of fields has been kept updated for more recent MX versions, other parts of this article may not be applicable to latest MX version, check for edits by developer.
([[Speciallog.txt|speciallog.txt]] is another log file that contains all dates in a single file, as do all the [[:Category:Ini_Files|.ini files]]).  


{{Version badge 1}}


'''Note for obsolete version 1.9.0 to 1.9.3:''' There is a bug in these versions in that 'Create missing' inserts 'heating and cooling degree day' values the wrong way round.
==How Cumulus Creates and Updates this file==


'''Note for obsolete version 1.9.3 only:''' Create missing might in some cases be affected by a bug in 1.9.3 that can cause incorrect date order for records (dayfile.txt uses dd/mm/yy  or dd-mm-yy and all records should be in ascending chronological order)
* Cumulus reads values supplied by your weather station, (either directly while Cumulus running, or for some weather station types can read historic data during catch-up on restarting Cumulus)
* Cumulus converts them to the units you prefer,
* Cumulus applies any calibration (multiplier and offset) you have set,
* For a sub-set of those readings (perhaps those every minute if readings are collected every 10 seconds), the spot values of source items like temperature, humidity, wind speed, can be used in calculations of derived items like "wind chill", "dewpoint" and "feel-like" temperature.  
* Cumulus then sees if the resulting soource, or derived, value implies [[:Category:Ini Files|any extreme records file]] needs to be updated
** Daily extremes are held in [[today.ini]] and that is main source used when a new line is added to "dayfile.txt"


There are no known bugs for dayfile.txt handling in version 1.9.4 builds 1086 to 1100. Build 1099 is the standard final release of Cumulus 1 as this section was updated.


[[File:Badge vMx.png]]
==Why this file should be backed up==


'''Cumulus MX v3.0.0 (checked at build 3043) does not provide an editor'''
* This file contains daily extremes, the accuracy of those daily extremes depends on the interval between the spot readings that are used as explained above.
* If the file is corrupted, and not regenerated from a back-up, the only source of spot readings is the [[Standard_log_files|MMMyylog.txt]] files, and their interval might be only every half an hour (it has to be an exact fraction of an hour).
* As explained [[Monthly_log_files#Enhancement never implemented|here]] minima and maxima between such logging intervals are not recorded by Cumulus software
* Thus it is worth backing up this file, to another device than that running Cumulus, on a regular basis, probably a few times a week, to ensure this precious data is not lost if your device running Cumulus has a malfunction (or is damaged), or an electrical blip (or mistake by you) causes corruption to the original file,


'''Cumulus MX Version 3.4.5 - Build 3069 onwards provides an editor'''
Cumulus does periodically copy this file within the installation, but the copies are only kept for a limited time, and are on the same physical storage device, and so your main file is corrupted you might not be able to access the Cumulus back up or might not be able to go far back enough to find a file that has not been corrupted:
* The file is backed up when MX is restarted into a date/time stamped sub-folder of the [[Backup folder|'''backup''' folder]]
*The file is also backed up (to a date/time stamped sub-folder within '''daily''' sub-folder of that backup sub-folder) during the end of day process, but (depending on the release you are running) the back-up copy may, or may not, include a line for the previous day (the line that is appended in the same end of day)


= When Cumulus is left running =
Retention of these back ups:
* [[File:Badge vMx.png]] MX only keeps the last 9 of the date/time stamped sub-folders.
* [[File:Badge v1.png]] Legacy Cumulus 1 only keeps up to 8 of the date/time stamped sub-folders.


* Cumulus is frequently reading observations from your weather station, but these don't affect the daily log "dayfile.txt" as it is only updated once a day.
== Specific issues for MX ==
* There are no updates to dayfile.txt at any other times, but (for Cumulus 1 only) the contents of the file are read and processed for many of the display and edit menu options that can be selected from the main Cumulus 1 screen.
* Cumulus tracks the highs and lows in weather observations by comparing read values against those it has stored in [[Today.ini]], updating that file as required.
**What is stored in today.ini is processed into what get stored as next line in dayfile.txt as described in next section.
*(It also updates [[Alltime.ini]], [[Monthlyalltime.ini]], [[Year.ini]], and [[Month.ini]] when appropriate.
*(Periodically, the weather readings and derived values are stored in [[Standard log files]] which are set up for each month).
* Cumulus will not mind you accessing the daily log outside its software, except when it needs write access for processing end of day.
* If you do need to correct some rogue data in the log file, first take a copy and work on that copy, because any edits you do could muck up the specific format that Cumulus 1 or MX needs, there is a section on dealing with rogue data below. Only when you are absolutely sure that your edited copy meets all the constraints listed later, should you replace the original. 


== When Cumulus processes the end of the (meteorological) day ==
WARNING: It is important to note that some releases of MX are very fussy about consistency in all lines of '''dayfile.txt'''.  Earlier releases tended to have better compatibility with the legacy software. Subsequent releases expected every line to be expressed exactly as specified in the locale.  MX in its latest release is trying to cope better with inconsistent date separators.
*A new row is appended to dayfile.txt, the values are prepared from reading "today.ini" file, not all values available in "today.ini" are stored in dayfile.txt.
*Some of this information is also stored in [[yesterday.ini]].
*Back ups of both today.ini, and dayfile.txt, log files ''in their state after the end of day update'' are copied to the 'cumulus\backup\daily' folder, a maximum of only 9 daily sub-folders are retained.


'''Optional'''
Date field: Cumulus 1 (C1) did not care what character (or characters) separated the day, month, and year elements of the date field. MX insists that the same character (or characters), as defined in the locale, is used for all lines in file.  
* Some people require a copy of the local file to use on their web server. Consequently, after it has been updated they file transfer it to (or if their web server is local, copy it to) their web server. One way of doing this is [[Upload_Dayfile| described here]].
*Some people take a copy of the local file, and use it locally for other purposes. See [[#How you can use the daily log|How you can use the daily log section]] and also the [[[[Category::User Contributions|Cumulusutils]]]] link.
*For some people it is easier to follow an option of converting the file into a database table, and that table having a new row added each time the file gains a new line as described below.
=== Populating a database table ===


* The [[ImportCumulusFile|article here]] describes a method that can be used with Cumulus 1 to mimic the contents of dayfile.txt in a database table. However, be aware that the later versions of that script have bee edited for MX, so you will need to use an older version of the script that fits the version of Cumulus 1 you are using.
Real number fields: MX uses the '''locale''' to decide what character (decimal comma or decimal point) separates integer and decimal parts of numbers. Every line of the file must be consistent in use of integer/decimal separator. C1 used the '''Region''' settings in Microsoft's Control Panel to determine how to store (and output) numbers for you, but (except if ''list separation character'' was comma) was fairly tolerant when reading old data in files. At the time of writing this, it was proposed the next major release will force this file to use decimal points (full stops not commas) regardless of locale. This proposal may or may not happen, the point is that information here might be incorrect for the release that you are using.


Time-stamp fields: MX insists on HH:mm format being consistently used in every line of file, C1 did not care what (non-space, non-field separator) symbol separated the minutes from the hours.


Number of fields: The number of fields in the file increases in various versions as shown in [[#List_of_fields]]. 
* C1 will accept (as did Cumulus 2) any line with 15 to 45 fields in it. This is because the earliest version only stored 15 fields, as C1 was developed fields were added (as shown in field list) until there were 45 fields.
* Each release of MX expects a particular number of fields in each line of file; MX has added fields as the software has developed, and it even (as shown in field list) inadvertently added 2 fields later removed. The difference is that MX (for some functionality from release 3.4.5, for all functionality from release 3.9.5) reads the whole file into an internal (RAM held) array with a fixed number of elements, therefore every line ends up with same number of fields when written back into file. 
** If you have some lines in your file that were created by an earlier release of Cumulus, and so have less than whatever is the current number of fields for the release you are using, there is a utility to run that will create a new dayfile.txt with all fields populated, please see [[Calculate Missing Values]] page.  Please ensure you use the right version of the "Create Missing" utility mentioned on that page as it also get upgraded when fields are added, and it uses various software libraries contained within .dll files specific to a particular CumulusMX.exe release.


==How to view or edit this file==


UPDATE BELOW
The detailed information has been moved to [[Amending dayfile|viewing/editing '''dayfile.txt''' page]].


An editor has been included within recent Cumulus releases of each flavour:
* [[File:Badge vMx.png]] Available from release 3.4.5 (13 Mar 2020):  In [[MX_Administrative_Interface#The_Data_Log_Viewing_and_Editing_interface|the interface]] go to '''Data logs''' menu and select ''Dayfile''
* [[File:Badge v1.png]] Available from version 1.9.2 (5th October 2011) to final legacy release: On Main Screen from [[Cumulus_Screenshots#File.2FEdit.2FHelp_Menu|'''Edit''' menu]] select ''Dayfile.txt''
**'''Note for obsolete version 1.9.0 to 1.9.3:''' There is a bug in these versions in that 'Create missing' inserts 'heating and cooling degree day' values the wrong way round.
**'''Note for obsolete version 1.9.3 only:''' Create missing might in some cases be affected by a bug in 1.9.3 that can cause lines to be stored in incorrect date order (dayfile.txt uses dd.mm.yy, dd/mm/yy  or dd-mm-yy, for its date field; and all lines should be in ascending chronological order)
**There are no known bugs for dayfile.txt handling in version 1.9.4 builds 1086 to 1101. Build 1099 is the standard stable final release of Cumulus 1 for most weather station types, 1100 and 1101 are for specific weather station types.


Please note that the editor in Cumulus 1 allows you to change the date, as well as all the other fields, although the lines must be kept in ascending date order to avoid errors when subsequently reading the file.


*There is a section at [[Cumulus_MX#Optional_Sections|Cumulus MX]] to explain how MX includes the ability to generate SQL for creating the database table, for updating it with past data, and to add a new row at the end of the day for the standard database table version of this daily summary log.  
The MX editor does not let you change the date, you can only change other fields or delete an entire line, so you have no control over the order of the lines in the file.




==Reading the file==


See [[Daily Summary]] page for a full discussion of ways, external to Cumulus, to read this file.


Apart from the viewing/editing options just described, Cumulus software reads this daily summary file in vaCumulus 1 does not actually number lines, however it does count lines as it reads them, so if there is an error when it reads the file, the original Cumulus will report the line number (numbering from 1) where it first found an error (line numbering uniquely identifies the line, even if a date is duplicated, or a line feed has been deleted so two lines are merged).rious other circumstances depending on the release you are running.


* [[File:Badge v1.png]] The legacy software only reads the file when the Cumulus user makes a specific request, in normal operation the existing content is ignored:
** The legacy Cumulus has a number of [[Cumulus_Screenshots#View_data|screens for viewing data for various periods]], to populate these screens Cumulus has to read all of the [[:Category:Files with Comma Separated Values|Files with Comma Separated Values]] as the derivatives shown generally do not match the extremes tracked in [[:Category:Ini Files|.Ini files]].
** The '''Select a graph''' feature also uses all of the [[:Category:Files with Comma Separated Values|Files with Comma Separated Values]].
** The end of day action uses a simple "append" instruction, so it does not need to read the file
* [[File:Badge vMx.png]] As already mentioned, MX reads the entire '''dayfile.txt''' file when it is first started into an internally held array. That internal copy was introduced in release 3.9.2 - b3097 (7 Dec 2020), it was needed to drive the  [[Highcharts_-_Historic|'''historic charts functionality''']]; both in the [[MX Administrative Interface|interface]], and the example included [[New Default Web Site Information|Historic Charts web page]].
** From release 3.20.0 - b3200 (21 Aug 2022) there is a '''This Period Highs and Lows''' web page (accessed from ''Records'' menu) which is similar to the ''screens for viewing data for various periods'' except that the extremes it shows match those tracked in [[:Category:Ini Files|.Ini files]].
** From release 3.20.0 - b3200 (21 Aug 2022) there is an option to '''Reload dayfile''' in a ''Utils'' menu, this updates the internal held array by reading the file again; essential if an edit has been made to the file.


==Line numbering and Error messages==


==== Using that table ====
Cumulus 1 does not actually number lines, however it does count lines as it reads them, so if there is an error when it reads the file, the original Cumulus will report the line number (numbering from 1) where it first found an error.
In both cases, your web site can use that database table avoiding any clash of timing with the Cumulus 1 or MX use of the daily summary log.  


For examples of some of the third party tools (Cumulus [[Category:User_Contributions|user contributions]]) using the database daily summary table see [[Daily Summary#Some_example_Scripts|here]]. Of course there are also a lot of tools written to use a copy of the dayfile.txt log file, and some of these could be adapted to use the database table instead, if you are a programmer.  
Cumulus MX stores the contents of the file in an internal two dimensional array. The outer dimension is identified by numbering (from zero) what were lines in the file. The inner dimension has that line number as element zero, and the fields taken from file are therefore numbered from one.


In my case I also store the equivalent of what appears on my version of "thismonth.htm" each month in another database table, i.e. I have one database table column for each of the weather derivatives I show on my web page that show this month's values; it is many more derivatives than are shown on the standard web page, but some are initially hidden. Consequentially, when my daily update script detects from the date that it is processing the last day of a month, it then starts another script that reads all the rows in the daily summary table for that month, and stores the highest/lowest/total (as relevant) in my monthly_summary table (nothing to do with the "monthly" table that MX can generate from its standard log file). This monthly summary table allows me to have web pages that compare consecutive months or compare months between years. Just another example of how much you can get from just one log file!
Obviously, line numbering uniquely identifies the line, even if a date is duplicated, or a line feed has been deleted so two lines are merged in the file. This is why you will see line numbers quoted in any error messages related to this file.


==== Alternative schemas ====
Some of the editors you may use to view/edit the file may number the lines (in some cases always, in others as an option). If you have seen an error message, then to correct the file you need to use a tool that does number the lines in order to find where the correction is needed.  Error messages report just the first error found, so check subsequent lines in case they have same error.


Of course you do not need to exactly mimic the log file with the schema in your database table, your weather station may not produce solar values so those fields in dayfile.txt need not be columns in your database table, or you may wish to add other values from external sensors or other log files.
= List of fields in dayfile.txt =


{{Version badge 1}}
For your installed build please see ''[[dayfileheader.txt]]''. This file identifies all the fields in each line of the '''dayfile.txt''' file in the release you are running.
With Cumulus 1, you would need to be a programmer and write your own script to update the database table with your own schema. You might use the importCumulusFile article to start you off.  


You might also, as I did, want your script to validate what it reads from the daily summary log to ensure only valid numbers and times are stored in your database table, while any invalid inputs are stored as nulls by your script. In my own case, my daily summary table has no solar columns but it does have several additional columns (including the daily increment of chill hours, the cumulative chill hours, the contents of the Weather Diary, the time of the last rain tip, wind bearings as compass characters (e.g. NNW) as well as numerical bearings). When I used Cumulus 1 I wrote a PHP script to find all these additional values, for example it reads the [[today.ini]] and [[month.ini]] log files as stored in the end of day backup (not the ones being updated for new day in data folder), and the [[log.xml|weather diary in log.xml in data folder]].  
That file has changed location from release 3.20.0 - b3200 (21 Aug 2022), it is now in [[data folder]], for Cumulus 1 and all earlier MX releases it was in same directory as the Cumulus executable.


[[File:Badge vMx.png]]
As explained earlier, the number of fields in a line has (with one exception when fields were added in error) increased as the Cumulus software has been developed. The table below therefore groups the fields under labels that indicate which version/release introduced them.
MX allows you to specify a different schema in the SQL it generates, but it does not offer that validation feature I just mentioned. I continue to use my Cumulus 1 script (with some changes as for example the weather diary works differently, I am querying SQLite from \CumulusMX\data\diary.db) now I use MX. In the MX standard functionality, you are limited to using web tags for your inputs, and some of those are affected by the end of day process. I tried various content in the custom EOD query, but it did not give me what I need for the scripts that produce my web pages.


MX automatically stores all end of month figures as log files, a feature that Cumulus 1 and 2 lacked, but as yet it does not actually use this extra data, and provides no simple facility to put what is in these files into database tables. There is no end-of-month selection for updates in MX, so you can't easily get as much from dayfile.txt as I do.
==Field numbering==


== When Cumulus is restarted after a break in running  ==
The table below was first created when the only flavour of Cumulus software available was what we now call the legacy Cumulus 1. Back then the fields '''were''' numbered starting from zero. This reflected the way fields were identified when processed as elements of an single-dimension array variable representing a line.


* It reads the daily log and uses the rainfall totals for each day stored in the daily summary log to calculate the rainfall for this month, and this year/season (see [[FAQ#Where_does_Cumulus_get_its_this_month_and_this_year_rainfall_totals_from.3F|this Cumulus 1 FAQ]])
The old numbering from zero had two advantages:
* Thus you must not have another process attempting access to the daily log when Cumulus is re-starting.
# It stressed that the date field was different to the rest, all other fields were either values or time-stamps
* For Cumulus 1, back ups of 8 selected log files including dayfile.txt that are copied to start-up folders in the 'cumulus\backup' folder, the last 8 start-up folders only are retained.
# Numbering starting from zero is consistent with standard indexing used for arrays in programming languages (like JavaScript), so the number shown '''was''' the number to quote in any scripts where a Cumulus 1 line was converted to an array, and you needed to address a single field.
* For Cumulus MX, there are backups of 10 files, the extra ones are the weather diary and Cumulus.ini, that are  copied to start-up folders in \CumulusMX\backup\, again there are only 9 kept, unless you back these up somewhere else.


== How you can use the daily summary log file ==
Please note the list of fields has been rewritten especially for MX. As part of the rewrite, the fields have been renumbered, in some forum posts you might see references to old numbering, in others to new numbering.  As explained [[#Line numbering and Error messages|above]] the fields are now numbered starting from 1 to fit in with an internal array created when the log file is read, the processing code adds a line number in front of the date field on each array 'line' it holds.


* If you want to run scripts that use the daily summary log file, it is best if you take a copy first, you can ask Cumulus 1 to take a copy after each update by using the '''Daily''' box in the bottom left of the ''Sites/Options'' frame within the ''Internet'' options screen from the '''Configuration''' menu; that will safely take a copy of 'dayfile.txt' after it is updated. This has the advantage it happens even if Cumulus has been stopped and restarted and rollover is happening during catch-up and so not at usual rollover time according to the computer clock.  See Cumulus 1 '''Help''' for information on using this feature, I add a redirection ">daily_batch.log" in the parameter box alongside so that any output from running the command file I specify in the main box is sent to a log file overwritten in each run; this enables me to see the reason for any failure. 
== Information shown in the table ==
* Cumulus MX has option to list files to be transferred once a day as part of rollover, so you can use that to generate your extra copy. This has the advantage it happens even if Cumulus has been stopped and restarted and rollover is happening during catch-up.
* A third party tool "Cumulus Toolbox" can also be used to copy/transfer files at a particular time. Note this cannot tell whether Cumulus has done its rollover at the normal time, or during catch-up.
* There are other ways to specify that when a file changes it is copied somewhere.
*The system routines that Cumulus uses to access dayfile.txt require exclusive use of that file, so if you have any other process trying to access that file when Cumulus restarts, when Cumulus processes end of the (meteorological) day, or when a relevant option is selected from View or Edit menus, either your external process or the Cumulus process may fail.
*Normally if you use any third-party packages like for example "Cumulusutils", the separator used in first line is assumed to be true for all lines.
*Some third-party tools have to be told what separator you use for dates, before they can read your dayfile.txt.
== Cumulus 2 ==
 
Does not provide any viewing functionality.
 
== Cumulus MX ==
 
There is a dayfile editor within the admin interface to edit this log file.
 
Only from MX version 3.6.0 has this been able to read the log file if it has some lines that were created using Cumulus 1 (with less than 46 fields). In the same version of MX, the number of fields in this log file was increased by 4 when Feels Like temperature was added. From that version all lines viewed in this editor will have 50 fields. The content of any field that was not in the line when it was created will be an empty string as far as this editor is concerned and any line edited and saved, therefore gains all these empty fields and will be stored as 50 fields until version 3.6.10.
 
From Emergency Version 3.6.12 (formally released in 3.7.0), all lines have 54 fields. The extras are Canadian Humidity Index (Humidex).
 
[[File:Badge vMx.png]]For Cumulus MX, when you select a line, both  '''Edit''' and '''Delete'''  buttons are enabled. There is no way of inserting new lines into dayfile.txt from within MX, nor of changing the dates in the file.
 
 
 
=== Editing  inside MX ===
 
Pick Edit, click that and an editing dialog pops up, that does not let you change the line number nor the date, but all other fields show their current contents and you can overtype as necessary. Scroll down to see 2 buttons (how they are labelled depends on which version you are using), the left button ignores any edits you have made (it is labelled 'Close' or "Cancel" and simply does same effect as clicking the "x" in the top right corner), and the right hand button saves your changes (even if it is labelled 'Edit' rather than "Save" in the version you are using).
 
 
== Using the daily summary log on your web-site ==
 
If you upload the log file to your web site then (with the help of JavaScript) you can read the log file to obtain information to show on a web page.  You could have a web page that shows a today.htm like table for the last 7 days by combining reading Cumulus web tags with reading from the log file.
 
Search the Cumulus support forum to see (for example) how others extract information from dayfile.txt to display on their web page a set of fields similar to those shown for 'Yesterday.htm' web page for other dates in the past, such as one year ago.
 
If you use a script to read what is in the  daily summary log file into a database table, or use the functionality in Cumulus MX to upload automatically to a database table, then see [[Daily_Summary]] article for information about ALL of the ways to show values from this database table.
 
==Viewing summary figures for a month or period==
 
'''These notes apply to Cumulus 1 only'''
 
To view a summary of dayfile.txt for a month, calendar year or selected period, use ''This month'' (choose any month, default is month from your computer system date), ''This year'' (choose any year, default is year from your computer system date), or ''This period'' (choose any start and end dates, default is yesterday calculated from your computer system date), within the '''View''' [[Cumulus_Screenshots#File.2FEdit.2FHelp_Menu|menu]].
*Remember the daily summary log has its records based on rollover to rollover days.
*In all cases they exclude the today details that are not stored on dayfile.txt until the end of day rollover.
*If you use 9am or 10am rollover, and choose '''View''' ''This period'' between midnight and your 9am/10am rollover any day your latest meteorological day is the yesterday in terms of your computer system date that 'This period' tries to display as its default day, and the display will initially appear blank.
*If you use 9am or 10am rollover, and choose '''View''' ''This month'' before your 9am/10am rollover on the first day of a new calendar month your latest meteorological month is different to your computer system month 'This month' tries to display as its default month, and the display will initially appear blank.
 
Most of the displayed results are for observations in the daily summary log, but a few parameters are not in that log and are derived from the monthly logs (e.g. average wind speed) or the weather diary (e.g. count of days with snow lying).
*On the screen displayed after selecting ''This month'', you can change the month and year required using the options at bottom left, click ''Update Display'' and the revised summary will be calculated.
*On the screen displayed after selecting ''This year'', you can change the year required using the options at bottom left, click ''Update Display'' and the revised summary will be calculated.
*On the screen displayed after selecting ''This period'', you can change the start date and end date then click ''Update Display'' to get the equivalent calculations displayed for part of a month or any other period.
 
 
Note differences between observation reports on View screens and those available as web tags.
*Date and time stamps:
**The day number shown on screen is the meteorological day (changing at rollover and that may be at midnight or 9am/10am) as that date appears in dayfile.txt;
**A time-stamp (with time and date) given in a web tag quotes a calendar date (always changing at midnight).
*Reported statistics example: 
**The screen shows total number of dry or wet days in the month;
**The web tags report longest dry or wet period in the month.
 
= List of fields in dayfile.txt =


== Variation by Cumulus version ==
* The date '''is supposed to''' be a unique identifier, the same date should not be repeated in another line, however Cumulus 1's editor allows you to change that date field.
** The dates, as mentioned earlier, should be in ascending order.
** Please see [[amending dayfile]] page for more information on dates
** Both Cumulus 1 and MX may get confused if you restart the software close to rollover time, and in that confused state they may create a second line with same date as a date already in the file.
** If you regularly restart Cumulus close to rollover time, then a whole sequence of dates can be repeated either as a block or as pairs.
* The remaining fields are all either numerical values, or a time paired with (except for first wind field) preceding numerical value.
** Cumulus 1 actually enforces this pairing (i.e. it validates that a time is present where it is needed). Cumulus MX only validates that each field is of correct type, it does not recognise any relationships between fields.
*The alphabetic column identifiers used by many spreadsheet editors are shown in the table
** IMPORTANT: If you do use a spreadsheet editor, do ensure '''all columns are set to "text" format''',
** Note that you will corrupt this file if you let your spreadsheet recognise content as dates or time, or let it change the number of decimal places.
* The type of field is shown in the table:
** Note you must not include a sign for an unsigned field,
** Note you can not specify a decimal comma/point in an integer field,
** Note all fields of type time must use 5 character "HH:mm" format, although Cumulus 1 will accept other separator characters where ":" shown.
* The field description is shown, together with references to where that terminology is explained


The dayfile.txt has grown as Cumulus's functionality has been extended, the table below shows fields grouped by the Cumulus version when those fields were added.


If you have been using Cumulus for a while, then some lines will be shorter than others, the number of fields per line growing when a new release adds new fields, Cumulus does not in normal operation modify earlier lines, but both Cumulus 1 and MX provide editors where it is possible to modify any line.
== Table listing Fields ==


There is information earlier in this article about how you might be able to recalculate values to put in for fields that did not exist when any particular line was created.
'''For your installed build please see ''dayfileheader.txt'' (stored within the folder that contains your Cumulus executable), as that will list which fields are available for you.'''
== Information shown in the table ==
*The fields are now numbered starting from 1 to fit in with Cumulus MX where when the log file is read, adds a line number in front of the date field.
** The Cumulus MX user may not be aware of this happening as it is within the internal workings.
*The original table below was for Cumulus 1 and then field number '''was''' starting from zero. So in some forum posts you might see references to old numbering, in others to new numbering. The old numbering from zero had two advantages:
*#It stressed that the date field was different to the rest. The date '''must''' be a unique identifier, the same date should not be repeated in another line.
*#The remaining fields were all either numerical values  or a time paired with preceding numerical value.
**Numbering starting from zero is consistent with standard indexing used for arrays in programming languages (like JavaScript), so the number shown '''was''' the number to quote in any scripts where a line was converted to an array, and you needed to address a single field.
*The alphabetic column identifiers used by many spreadsheets are shown, please see warnings about using spreadsheets for editing earlier on this page
*The type of field is shown, you must not put a sign for an unsigned field, you can not specify a decimal point in an integer field, all time fields must use HH:mm format
*The field description is shown, together with references to where that terminology is explained
=== List of Fields ===
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
Line 193: Line 160:
|-
|-
|0
|0
|colspan="3"|For internal MX purposes, the zero field identifies a field that holds the line number. It is not actually stored as a field in the log file, but precedes any line exchanged via an application programming interface, and therefore is also included in an array representing all the fields in any log file line.
|Colspan="4" style="background: pink;"|For internal MX purposes, the zero field identifies a field that holds the line number. It is not actually stored as a field in the log file, but precedes any line exchanged via an application programming interface, and therefore is also included in an array representing all the fields in any log file line.


If you are processing this log file using a third party (or your own) script, that probably does not place the line number into any array, and your array elements will start at 0 for the field labelled 1 in this table, so putting all field numbers out by 1.
If you are processing this log file using a third party (or your own) script, that probably does not place the line number into any array, and your array elements will start at 0 for the field labelled 1 in this table, so putting all field numbers out by 1.
Line 233: Line 200:
|signed decimal
|signed decimal
|Maximum temperature
|Maximum temperature
|-
|Colspan="4" style="background: pink;"| Consistency Note: In some cases Minimum comes before Maximum, in other cases Maximum is before Mimum
|-
|-
|8
|8
Line 337: Line 306:
|unsigned
|unsigned
|Total hours of sunshine (only valid if sunshine sensor connected)
|Total hours of sunshine (only valid if sunshine sensor connected)
'''Important if rollover time is 9 am or 10 am:''' Most fields in this file are updated taking information from [[today.ini]].  For a non-midnight rollover, then the Sunshine hours reported here is from 00:01 on the calendar date corresponding to the date in the first field of this file, to subsequent midnight, and that end time is 9 or 10 hours before when this file is updated. Meanwhile, the sunshine hours count has been reset and so the figure in today.ini is not what is wanted here. For that reason the sunshine hours reported here are taken from [[yesterday.ini]].
|-
|-
|colspan="4" style="background:lightgray;"|(The next 16 entries were added from version 1.9.1 May 2011)
|colspan="4" style="background:lightgray;"|(The next 16 entries were added from version 1.9.1 May 2011)
Line 429: Line 400:
|[[Heat/cold degree days and Chill hours | Cooling degree days]]
|[[Heat/cold degree days and Chill hours | Cooling degree days]]
|-
|-
|colspan="4" style="background:lightgray;"|The next two pairs were added in version 1.9.3 build 1036 (these only show valid values if appropriate sensors exist)
|colspan="4" style="background:lightgray;"|The next two pairs were added in legacy version 1.9.3 build 1036 (these only show valid values if appropriate sensors exist).
 
Fields listed up to those following here applied to the final legacy Cumulus 1.9.4 and formed the basis for early releases of Cumulus MX.
|-
|-
|43
|43
Line 451: Line 424:
|Time of high UV Index
|Time of high UV Index
|-
|-
|colspan="4" style="background:lightgray;"|The next two pairs were added in version 3.6.0, 2 more derived values and their times
|colspan="4" style="background:lightgray;"|The next two pairs were added in MX release 3.6.0, 2 more derived values and their times
|-
|-
|47
|47
Line 473: Line 446:
|Time of low feels like temperature
|Time of low feels like temperature
|-
|-
|colspan="4" style="background:lightgray;"|The next two pairs were added in version 3.6.12  
|colspan="4" style="background:lightgray;"|The next two pairs were added in release 3.6.12  


*Version 3.6.12 (build 3088) was an emergency release to cure serious problems in previous build 3087. It added the following 4 fields (2 values and their times).
*Version 3.6.12 (build 3088) was an emergency release to cure serious problems in previous build 3087. It added the following 4 fields (2 values and their times).
**The 4 extra fields are left empty in this release, although you can add values and time-stamps using the dayfile editor.
**The 4 extra fields are left empty in this release, although you can add values and time-stamps using the dayfile editor.
*From version 3.7.0 the first 2 of these 4 fields are populated, and the last 2 are removed, so I have labelled them as error.
*From release 3.7.0 the first 2 of these 4 fields are populated, and the last 2 are removed, so I have labelled them as error.
|-
|-
|51
|51
Line 487: Line 460:
|AZ
|AZ
|5 characters
|5 characters
|Time of high Humidex
| style="background:pink;"|Time of high Humidex
 
'''Bug for releases 3.13.0 to 3.14.2 inclusive''':  The major code rewrite for release 3.13.0 replaced the previous code for the processing for all Cumulus files,  the new code incorrectly stored ''Time of high feels like temperature'' in this field for all these releases!  Corrected in minor code rewrite for 3.14.3 - b3163 25 Jan 2022 (not released to public until 3.15.0 - b3169 Released 31 Jan 2022)
|-
|colspan="4" style="background:lightblue;"|Just confirming that the next 2 fields were included by mistake in an emergency release (3.6.12), and are not included in any other version, so have labelled them as error.
|-
| 53 ('''error''')
| BA
| signed decimal
| Labelled as Low Humidex, but not used, (appear in 3.6.12, but no other release)
|-
| 54 ('''error''')
| BB
| 5 characters
| Labelled as Time of low Humidex, but not used,  (appear in 3.6.12, but no other release)
|-
|colspan="4" style="background:lightgray;"|The next value was added in release 3.12.0
|-
|-
|colspan="4" style="background:lightblue;"|Just confirming that the next 2 fields were included by mistake in an emergency release (3.6.12), and are not included in current nor any other version, so have labelled them as error.
| 53 (new)
| BA
| unsigned decimal
| [[Heat/cold_degree_days_and_Chill_hours#Chill_Hours_and.2For_Air_Frost|Cumulative Chill Hours]] since start of season
|-
|-
|53 ('''error''')
|colspan="4" style="background:lightgray;"|The next value and time fields were added in release 3.20.0
|BA
|-
|signed decimal
| 54
|Labelled as Low Humidex, but not used, (appear in 3.6.12, but no other version)
| BB
| unsigned decimal
| Highest rainfall total in (an approximate, as it depends upon timing of earlier entries in [[Recent history]]) 24 hour period ending in [[Meteorological day]]
|-
|-
|54 ('''error''')
| 55
|BB
| BC
|5 characters
| 5 characters
|Labelled as Time of low Humidex, but not used,  (appear in 3.6.12, but no other version)
| Time when (approximate) 24 hour period for rainfall total above ends
|}
|}


==Example of the file==
==Example of the file==


An extract of a few lines of the dayfile.txt
An extract of a few lines of a dayfile.txt


<pre>
<pre>
Line 521: Line 515:
07/08/11,17.7,342,13:24,12.9,05:47,24.1,14:53,1013.92,19:49,1016.43,09:36,0.0,00:00,0.0,18.4,19.1,6.3,14:06,48,12:45,89,05:36,3.30,9.0,24.1,14:53,24.6,15:48,13.3,05:47,0.0,00:00,12.9,05:47,14.6,15:52,10.7,11:33,11,1.6,1.7
07/08/11,17.7,342,13:24,12.9,05:47,24.1,14:53,1013.92,19:49,1016.43,09:36,0.0,00:00,0.0,18.4,19.1,6.3,14:06,48,12:45,89,05:36,3.30,9.0,24.1,14:53,24.6,15:48,13.3,05:47,0.0,00:00,12.9,05:47,14.6,15:52,10.7,11:33,11,1.6,1.7
</pre>
</pre>
[[Category:Log Files]][[Category:Cumulus 1]][[Category:Cumulus MX]]

Latest revision as of 07:14, 27 September 2022

Cumulus Version MX SpecificCumulus Version 1 SpecificThis Wiki page applies to both Cumulus flavours.

As part of a redevelopment of Wiki, this page has been simplified, by moving some content to new pages. Old links in the support forum, that were to content no longer on this page, will bring you here.

Content previously on this page has been moved as follows:

The content that remains on this page is summarised by the table of contents that follows.

About this file

  • This Wiki page describes one of the files not included in any release download.
  • This daily summary file (Steve Loft shortened that to "day" plus "file") uses a ".txt" extension, and is essentially a plain text file in CSV format.
    • CSV stands for "Comma Separated Values", but in the Cumulus context the field separator can be other characters including ";" or "|"
  • The file is created in data sub-folder of your Cumulus installation when Cumulus needs to store its first line in this file.
  • Cumulus MX reads the whole of this file into an internal array (stored in RAM) each time you restart the software,
    • Please see here for implications
    • Therefore MX users who move to a different location should archive the old "dayfile.txt", to avoid any discontinuities in any graphs plotted from active file


(speciallog.txt is another log file that contains all dates in a single file, as do all the .ini files).


How Cumulus Creates and Updates this file

  • Cumulus reads values supplied by your weather station, (either directly while Cumulus running, or for some weather station types can read historic data during catch-up on restarting Cumulus)
  • Cumulus converts them to the units you prefer,
  • Cumulus applies any calibration (multiplier and offset) you have set,
  • For a sub-set of those readings (perhaps those every minute if readings are collected every 10 seconds), the spot values of source items like temperature, humidity, wind speed, can be used in calculations of derived items like "wind chill", "dewpoint" and "feel-like" temperature.
  • Cumulus then sees if the resulting soource, or derived, value implies any extreme records file needs to be updated
    • Daily extremes are held in today.ini and that is main source used when a new line is added to "dayfile.txt"


Why this file should be backed up

  • This file contains daily extremes, the accuracy of those daily extremes depends on the interval between the spot readings that are used as explained above.
  • If the file is corrupted, and not regenerated from a back-up, the only source of spot readings is the MMMyylog.txt files, and their interval might be only every half an hour (it has to be an exact fraction of an hour).
  • As explained here minima and maxima between such logging intervals are not recorded by Cumulus software
  • Thus it is worth backing up this file, to another device than that running Cumulus, on a regular basis, probably a few times a week, to ensure this precious data is not lost if your device running Cumulus has a malfunction (or is damaged), or an electrical blip (or mistake by you) causes corruption to the original file,

Cumulus does periodically copy this file within the installation, but the copies are only kept for a limited time, and are on the same physical storage device, and so your main file is corrupted you might not be able to access the Cumulus back up or might not be able to go far back enough to find a file that has not been corrupted:

  • The file is backed up when MX is restarted into a date/time stamped sub-folder of the backup folder
  • The file is also backed up (to a date/time stamped sub-folder within daily sub-folder of that backup sub-folder) during the end of day process, but (depending on the release you are running) the back-up copy may, or may not, include a line for the previous day (the line that is appended in the same end of day)

Retention of these back ups:

  • Badge vMx.png MX only keeps the last 9 of the date/time stamped sub-folders.
  • Badge v1.png Legacy Cumulus 1 only keeps up to 8 of the date/time stamped sub-folders.

Specific issues for MX

WARNING: It is important to note that some releases of MX are very fussy about consistency in all lines of dayfile.txt. Earlier releases tended to have better compatibility with the legacy software. Subsequent releases expected every line to be expressed exactly as specified in the locale. MX in its latest release is trying to cope better with inconsistent date separators.

Date field: Cumulus 1 (C1) did not care what character (or characters) separated the day, month, and year elements of the date field. MX insists that the same character (or characters), as defined in the locale, is used for all lines in file.

Real number fields: MX uses the locale to decide what character (decimal comma or decimal point) separates integer and decimal parts of numbers. Every line of the file must be consistent in use of integer/decimal separator. C1 used the Region settings in Microsoft's Control Panel to determine how to store (and output) numbers for you, but (except if list separation character was comma) was fairly tolerant when reading old data in files. At the time of writing this, it was proposed the next major release will force this file to use decimal points (full stops not commas) regardless of locale. This proposal may or may not happen, the point is that information here might be incorrect for the release that you are using.

Time-stamp fields: MX insists on HH:mm format being consistently used in every line of file, C1 did not care what (non-space, non-field separator) symbol separated the minutes from the hours.

Number of fields: The number of fields in the file increases in various versions as shown in #List_of_fields.

  • C1 will accept (as did Cumulus 2) any line with 15 to 45 fields in it. This is because the earliest version only stored 15 fields, as C1 was developed fields were added (as shown in field list) until there were 45 fields.
  • Each release of MX expects a particular number of fields in each line of file; MX has added fields as the software has developed, and it even (as shown in field list) inadvertently added 2 fields later removed. The difference is that MX (for some functionality from release 3.4.5, for all functionality from release 3.9.5) reads the whole file into an internal (RAM held) array with a fixed number of elements, therefore every line ends up with same number of fields when written back into file.
    • If you have some lines in your file that were created by an earlier release of Cumulus, and so have less than whatever is the current number of fields for the release you are using, there is a utility to run that will create a new dayfile.txt with all fields populated, please see Calculate Missing Values page. Please ensure you use the right version of the "Create Missing" utility mentioned on that page as it also get upgraded when fields are added, and it uses various software libraries contained within .dll files specific to a particular CumulusMX.exe release.

How to view or edit this file

The detailed information has been moved to viewing/editing dayfile.txt page.

An editor has been included within recent Cumulus releases of each flavour:

  • Badge vMx.png Available from release 3.4.5 (13 Mar 2020): In the interface go to Data logs menu and select Dayfile
  • Badge v1.png Available from version 1.9.2 (5th October 2011) to final legacy release: On Main Screen from Edit menu select Dayfile.txt
    • Note for obsolete version 1.9.0 to 1.9.3: There is a bug in these versions in that 'Create missing' inserts 'heating and cooling degree day' values the wrong way round.
    • Note for obsolete version 1.9.3 only: Create missing might in some cases be affected by a bug in 1.9.3 that can cause lines to be stored in incorrect date order (dayfile.txt uses dd.mm.yy, dd/mm/yy or dd-mm-yy, for its date field; and all lines should be in ascending chronological order)
    • There are no known bugs for dayfile.txt handling in version 1.9.4 builds 1086 to 1101. Build 1099 is the standard stable final release of Cumulus 1 for most weather station types, 1100 and 1101 are for specific weather station types.

Please note that the editor in Cumulus 1 allows you to change the date, as well as all the other fields, although the lines must be kept in ascending date order to avoid errors when subsequently reading the file.

The MX editor does not let you change the date, you can only change other fields or delete an entire line, so you have no control over the order of the lines in the file.


Reading the file

See Daily Summary page for a full discussion of ways, external to Cumulus, to read this file.

Apart from the viewing/editing options just described, Cumulus software reads this daily summary file in vaCumulus 1 does not actually number lines, however it does count lines as it reads them, so if there is an error when it reads the file, the original Cumulus will report the line number (numbering from 1) where it first found an error (line numbering uniquely identifies the line, even if a date is duplicated, or a line feed has been deleted so two lines are merged).rious other circumstances depending on the release you are running.

  • Badge v1.png The legacy software only reads the file when the Cumulus user makes a specific request, in normal operation the existing content is ignored:
  • Badge vMx.png As already mentioned, MX reads the entire dayfile.txt file when it is first started into an internally held array. That internal copy was introduced in release 3.9.2 - b3097 (7 Dec 2020), it was needed to drive the historic charts functionality; both in the interface, and the example included Historic Charts web page.
    • From release 3.20.0 - b3200 (21 Aug 2022) there is a This Period Highs and Lows web page (accessed from Records menu) which is similar to the screens for viewing data for various periods except that the extremes it shows match those tracked in .Ini files.
    • From release 3.20.0 - b3200 (21 Aug 2022) there is an option to Reload dayfile in a Utils menu, this updates the internal held array by reading the file again; essential if an edit has been made to the file.

Line numbering and Error messages

Cumulus 1 does not actually number lines, however it does count lines as it reads them, so if there is an error when it reads the file, the original Cumulus will report the line number (numbering from 1) where it first found an error.

Cumulus MX stores the contents of the file in an internal two dimensional array. The outer dimension is identified by numbering (from zero) what were lines in the file. The inner dimension has that line number as element zero, and the fields taken from file are therefore numbered from one.

Obviously, line numbering uniquely identifies the line, even if a date is duplicated, or a line feed has been deleted so two lines are merged in the file. This is why you will see line numbers quoted in any error messages related to this file.

Some of the editors you may use to view/edit the file may number the lines (in some cases always, in others as an option). If you have seen an error message, then to correct the file you need to use a tool that does number the lines in order to find where the correction is needed. Error messages report just the first error found, so check subsequent lines in case they have same error.

List of fields in dayfile.txt

For your installed build please see dayfileheader.txt. This file identifies all the fields in each line of the dayfile.txt file in the release you are running.

That file has changed location from release 3.20.0 - b3200 (21 Aug 2022), it is now in data folder, for Cumulus 1 and all earlier MX releases it was in same directory as the Cumulus executable.

As explained earlier, the number of fields in a line has (with one exception when fields were added in error) increased as the Cumulus software has been developed. The table below therefore groups the fields under labels that indicate which version/release introduced them.

Field numbering

The table below was first created when the only flavour of Cumulus software available was what we now call the legacy Cumulus 1. Back then the fields were numbered starting from zero. This reflected the way fields were identified when processed as elements of an single-dimension array variable representing a line.

The old numbering from zero had two advantages:

  1. It stressed that the date field was different to the rest, all other fields were either values or time-stamps
  2. Numbering starting from zero is consistent with standard indexing used for arrays in programming languages (like JavaScript), so the number shown was the number to quote in any scripts where a Cumulus 1 line was converted to an array, and you needed to address a single field.

Please note the list of fields has been rewritten especially for MX. As part of the rewrite, the fields have been renumbered, in some forum posts you might see references to old numbering, in others to new numbering. As explained above the fields are now numbered starting from 1 to fit in with an internal array created when the log file is read, the processing code adds a line number in front of the date field on each array 'line' it holds.

Information shown in the table

  • The date is supposed to be a unique identifier, the same date should not be repeated in another line, however Cumulus 1's editor allows you to change that date field.
    • The dates, as mentioned earlier, should be in ascending order.
    • Please see amending dayfile page for more information on dates
    • Both Cumulus 1 and MX may get confused if you restart the software close to rollover time, and in that confused state they may create a second line with same date as a date already in the file.
    • If you regularly restart Cumulus close to rollover time, then a whole sequence of dates can be repeated either as a block or as pairs.
  • The remaining fields are all either numerical values, or a time paired with (except for first wind field) preceding numerical value.
    • Cumulus 1 actually enforces this pairing (i.e. it validates that a time is present where it is needed). Cumulus MX only validates that each field is of correct type, it does not recognise any relationships between fields.
  • The alphabetic column identifiers used by many spreadsheet editors are shown in the table
    • IMPORTANT: If you do use a spreadsheet editor, do ensure all columns are set to "text" format,
    • Note that you will corrupt this file if you let your spreadsheet recognise content as dates or time, or let it change the number of decimal places.
  • The type of field is shown in the table:
    • Note you must not include a sign for an unsigned field,
    • Note you can not specify a decimal comma/point in an integer field,
    • Note all fields of type time must use 5 character "HH:mm" format, although Cumulus 1 will accept other separator characters where ":" shown.
  • The field description is shown, together with references to where that terminology is explained


Table listing Fields

Field number Spreadsheet column Field type Description
0 For internal MX purposes, the zero field identifies a field that holds the line number. It is not actually stored as a field in the log file, but precedes any line exchanged via an application programming interface, and therefore is also included in an array representing all the fields in any log file line.

If you are processing this log file using a third party (or your own) script, that probably does not place the line number into any array, and your array elements will start at 0 for the field labelled 1 in this table, so putting all field numbers out by 1.

Those fields included below have been in dayfile.txt from the start of Cumulus 1 (Version 1.0, the First release on 27th January 2004).
1 A 8 characters Date as 2 figure day [separator] 2 figure month [separator] 2 figure year - the separator is that set in the windows system short date format (see setup)
2 B Unsigned number Highest wind gust speed
3 C unsigned integer Bearing of highest wind gust
4 D 5 characters Time of highest wind gust
5 E signed decimal Minimum temperature
6 F 5 characters Time of minimum temperature
7 G signed decimal Maximum temperature
Consistency Note: In some cases Minimum comes before Maximum, in other cases Maximum is before Mimum
8 H 5 characters Time of maximum temperature
9 I Unsigned number Minimum sea level pressure
10 J 5 characters Time of minimum pressure
11 K Unsigned number Maximum sea level pressure
12 L 5 characters Time of maximum pressure
13 M unsigned number Maximum rainfall rate
14 N 5 characters Time of maximum rainfall rate
15 O unsigned number Total rainfall for the day
Above here represents the minimum length for every line, a count of 15 items
[There is no record of which version added this next field. The Cumulus Support Forum, while it was hosted by Steve Loft, moved to new forum software (phpBBB3) on 2 Jun 2008, and started afresh without retaining any previous content. Therefore all announcements about the content of each build prior to version 1.7.9 were lost. All that can be deduced is that it was between versions 1.2.5 and 1.5.1 as these do not appear in the release history issued by Steve Loft. The first mention of it in the new forum was not until December 2008, but that was not about when it was released. A web tag for this variable was added in Build 978 of 1.9.1 beta, which was obviously long after it was first calculated.

Because of that, in "DataEditor.cs" (part of the source code that is compiled into CumulusMX.exe) this addition has "Extended for ???" as a comment]

16 P signed decimal Average temperature for the day
(Wind run was added from version 1.8.4)
17 Q unsigned number Daily wind run
(The next pair of entries were added from version 1.8.9 build 907 (June 2010) as part of a total redesign of how dayfile.txt was implemented in Cumulus 1)
18 R unsigned number Highest Average Wind Speed
19 S 5 characters Time of Highest Avg. Wind speed
(The two pairs of humidity entries were added in October 2010, a v 1.9.0 beta, the exact build number is now lost)
20 T unsigned integer Lowest humidity
21 U 5 characters Time of lowest humidity
22 V unsigned integer Highest humidity
23 W 5 characters Time of highest humidity
(The next two entries were added from version 1.9.0)
24 X (not documented) Total evapotranspiration (Only valid for Davis stations, shows zero otherwise)
25 Y unsigned Total hours of sunshine (only valid if sunshine sensor connected)

Important if rollover time is 9 am or 10 am: Most fields in this file are updated taking information from today.ini. For a non-midnight rollover, then the Sunshine hours reported here is from 00:01 on the calendar date corresponding to the date in the first field of this file, to subsequent midnight, and that end time is 9 or 10 hours before when this file is updated. Meanwhile, the sunshine hours count has been reset and so the figure in today.ini is not what is wanted here. For that reason the sunshine hours reported here are taken from yesterday.ini.

(The next 16 entries were added from version 1.9.1 May 2011)
26 Z signed decimal High Heat index (added to Cumulus in 1.7.11 only as spot value, not stored)
27 AA 5 characters Time of high heat index
28 AB Signed decimal High Apparent temperature
29 AC 5 characters Time of high apparent temperature
30 AD signed decimal Low apparent temperature
31 AE 5 characters Time of low apparent temperature
32 AF unsigned number High hourly rain
33 AG 5 characters Time of high hourly rain
34 AH) signed decimal Greatest wind chill (high wind speed, low temperature) (calculated since version 1.8.3 as spot value, not stored)
35 AI 5 characters Time of greatest wind chill
(The next two pairs for dew point were added in version 1.9.2 beta build)
36 AJ signed decimal High dew point
37 AK 5 characters Time of high dew point
38 AL signed decimal Low dew point
39 AM) 5 characters Time of low dew point
(The next three entries were added in version 1.9.2 Build 1004)
40 AN unsigned integer Today's dominant/average wind direction
41 AO unsigned decimal Heating degree days
42 AP unsigned decimal Cooling degree days
The next two pairs were added in legacy version 1.9.3 build 1036 (these only show valid values if appropriate sensors exist).

Fields listed up to those following here applied to the final legacy Cumulus 1.9.4 and formed the basis for early releases of Cumulus MX.

43 AQ unsigned decimal High solar radiation
44 AR 5 characters Time of high solar radiation
45 AS unsigned decimal High UV Index
46 AT 5 characters Time of high UV Index
The next two pairs were added in MX release 3.6.0, 2 more derived values and their times
47 AU signed decimal High Feels Like temperature
48 AV 5 characters Time of high feels like temperature
49 AW signed decimal Low Feels Like temperature
50 AX 5 characters Time of low feels like temperature
The next two pairs were added in release 3.6.12
  • Version 3.6.12 (build 3088) was an emergency release to cure serious problems in previous build 3087. It added the following 4 fields (2 values and their times).
    • The 4 extra fields are left empty in this release, although you can add values and time-stamps using the dayfile editor.
  • From release 3.7.0 the first 2 of these 4 fields are populated, and the last 2 are removed, so I have labelled them as error.
51 AY signed decimal High Canadian Humidity Index or Humidex
52 AZ 5 characters Time of high Humidex

Bug for releases 3.13.0 to 3.14.2 inclusive: The major code rewrite for release 3.13.0 replaced the previous code for the processing for all Cumulus files, the new code incorrectly stored Time of high feels like temperature in this field for all these releases! Corrected in minor code rewrite for 3.14.3 - b3163 25 Jan 2022 (not released to public until 3.15.0 - b3169 Released 31 Jan 2022)

Just confirming that the next 2 fields were included by mistake in an emergency release (3.6.12), and are not included in any other version, so have labelled them as error.
53 (error) BA signed decimal Labelled as Low Humidex, but not used, (appear in 3.6.12, but no other release)
54 (error) BB 5 characters Labelled as Time of low Humidex, but not used, (appear in 3.6.12, but no other release)
The next value was added in release 3.12.0
53 (new) BA unsigned decimal Cumulative Chill Hours since start of season
The next value and time fields were added in release 3.20.0
54 BB unsigned decimal Highest rainfall total in (an approximate, as it depends upon timing of earlier entries in Recent history) 24 hour period ending in Meteorological day
55 BC 5 characters Time when (approximate) 24 hour period for rainfall total above ends

Example of the file

An extract of a few lines of a dayfile.txt

01/08/11,19.3,61,10:22,12.5,06:58,23.8,14:49,1014.26,20:46,1018.83,09:28,0.0,00:00,0.0,17.8,21.6,4.6,10:44,36,14:14,86,01:56,3.56,8.9,23.8,14:49,23.1,14:50,12.3,06:59,0.0,00:00,12.5,06:58,11.3,00:16,6.9,14:34,354,2.0,1.5

02/08/11,16.1,20,16:55,14.7,06:45,24.2,13:54,1013.79,19:13,1015.65,11:14,0.0,00:00,0.0,18.9,13.7,8.0,15:55,42,20:42,85,06:50,2.79,4.9,24.2,13:54,24.3,13:55,15.1,06:40,0.0,00:00,14.7,06:45,14.8,11:59,7.0,21:09,57,1.0,1.7

03/08/11,14.5,36,17:23,14.9,05:50,24.6,14:46,1012.70,18:44,1015.99,08:34,0.0,00:00,0.0,19.4,17.2,4.8,16:04,50,14:38,79,07:04,3.05,5.8,24.6,14:46,25.4,14:47,15.0,05:50,0.0,00:00,14.9,05:50,14.2,20:01,8.9,00:16,32,0.8,1.9

04/08/11,17.7,16,15:43,14.1,06:20,25.3,15:06,1013.08,18:42,1015.31,08:28,0.0,00:00,0.0,20.2,19.4,8.1,14:12,52,18:20,92,06:55,3.30,9.1,25.3,15:06,26.8,14:55,14.9,06:20,0.0,00:00,14.1,06:20,15.8,14:55,12.5,06:25,36,1.0,2.9

05/08/11,16.1,32,12:52,14.2,06:12,22.2,14:07,1013.89,00:01,1016.36,09:43,0.0,00:00,0.0,18.6,21.6,5.2,13:00,62,15:57,87,06:11,3.30,8.4,22.2,14:07,23.5,14:10,14.8,07:19,0.0,00:00,14.2,06:12,15.4,10:33,12.0,06:03,34,0.9,1.3

06/08/11,16.1,309,11:15,14.3,05:29,22.4,17:12,1014.46,20:02,1016.97,10:38,0.0,00:00,0.0,18.4,19.2,5.5,16:21,55,13:33,92,05:20,2.79,7.9,22.4,17:12,23.3,18:17,15.1,06:09,0.0,00:00,14.3,05:29,14.2,18:12,10.9,10:38,32,1.1,1.3

07/08/11,17.7,342,13:24,12.9,05:47,24.1,14:53,1013.92,19:49,1016.43,09:36,0.0,00:00,0.0,18.4,19.1,6.3,14:06,48,12:45,89,05:36,3.30,9.0,24.1,14:53,24.6,15:48,13.3,05:47,0.0,00:00,12.9,05:47,14.6,15:52,10.7,11:33,11,1.6,1.7