5,838
edits
Rain measurement: Difference between revisions
From Cumulus Wiki
Jump to navigationJump to search
m
→Optical Rain Gauge: Clarified pin connections for RG-11
m (→Rain Gauge Location: text added here that was previously in faq) |
m (→Optical Rain Gauge: Clarified pin connections for RG-11) |
||
|
One design has a row of collection funnels. In an enclosed space below each funnel is a [http://en.wikipedia.org/wiki/Laser_diode laser diode] and a [http://en.wikipedia.org/wiki/Photodiode phototransistor detector]. When enough water has been collected to form a single drop it drips from the bottom of the funnel, falling into the laser beam's path. The detector is set at right angles to the path of the laser beam so that light scattered by the drop of water breaking the laser beam is detected as a sudden flash of light. The flashes from these photodetectors are then read and transmitted or recorded.
The [http://www.rainsensors.com/| Hydreon Optical Rain Sensor] - Model RG-11 - uses an infrared sensor to detect rainfall with high precision. Some car windscreens have a similar sensor to automatically start wipers. Cumulus supports the RG11, [[Cumulus.ini#Section:_Station| via parameters in cumulus.ini Station section]]. It should be connected via a serial port
=Rain Gauge Location=
| |||
