5,838
edits
Setup: Difference between revisions
From Cumulus Wiki
Jump to navigationJump to search
m
→Units of measure: minor update to cross-references since vantage vue now discussed in forum
m (→Configuration: Settings: inserted word 'software' in front of version.) |
m (→Units of measure: minor update to cross-references since vantage vue now discussed in forum) |
||
|
By far '''the biggest decision you will make''', and be held to, is the various units of measure. ''Select these very carefully when you are setting up.''
Remember ''if you try to change your old data later'' it probably has already been rounded and applying a single conversion factor would cause inaccuracy. For instance in rainfall you can't get back exactly to millimetres to 1 decimal place from inches to 2 dp. For example, 0.01 inches is 0.254 millimetres, which rounds to 0.3 mm, but 0.02 inches is 0.508 mm, which rounds to 0.5 mm rather than 0.6. To minimise rounding error, you need to convert the old data first into whatever precision [[:Category:StationSpecific| your weather station]] works in (e.g. Fine Offset rainfall bucket is 0.3mm, its pressure measurement is in dPa (integer decaPascal), wind speed in tenths of metres/second and temperature in tenths of degrees Celsius), this may be different to how you have set its console display, and then convert into whatever future units you select for Cumulus before rounding. So devising suitable conversion tactics and applying to all old data could require hours of work. See discussions in support forum e.g. [http://sandaysoft.com/forum/viewtopic.php?f=13&t=10216&start=0 this Fine Offset rainfall thread], [http://sandaysoft.com/forum/viewtopic.php?f=6&t=10327&sid=653dc1eceb1c5a0591512b84578680bd this Vantage Vue wind speed thread] or search (specify station or units).
=== Dates ===
| |||
