5,838
edits
Cumulus.ini (preserving history): Difference between revisions
From Cumulus Wiki
Jump to navigationJump to search
Cumulus.ini (preserving history) (view source)
Revision as of 22:28, 4 September 2013
, 4 September 2013→Introduced for problems with Fine Offset family, but may be more widely applicable:: added EWdisablecheckinit=
m (→Introduced for problems with Fine Offset family, but may be more widely applicable:: Added 'Only relevant if all conditions met') |
m (→Introduced for problems with Fine Offset family, but may be more widely applicable:: added EWdisablecheckinit=) |
||
|
*0 = Disabled, default i.e. deselected on the Station Configuration Screen
*1 = Enabled as selected on the Station Configuration Screen
|-▼
|EWdisablecheckinit=0
|Add this line to cumulus.ini [Station] section if application gets stuck
*0 = Disabled, default, it checks the first two bytes of the Fine Offset station's memory.
*1 = Ignores part of memory (see [[FAQ#When_I_start_Cumulus.2C_I_get_the_error_message_.22The_station_is_not_initialised.22]])
|-▼
|EWduplicatecheck=0▼
|Add this line to cumulus.ini [Station] section if application gets stuck in the download stage.
|-▼
|SyncFOReads=1▼
|Specifies the Fine Offset synchronisation mode of operation.▼
*0 = default▼
*1 = Re-synchronizes each day▼
|-
|ReportLostSensorContact=0▼
|Option to turn off reporting of 'lost sensor contact' for Fine Offset stations. (added Cumulus 1.9.4 b1070)▼
*0 = reporting off▼
*1 = reporting on (default)▼
|-
|EWpressureoffset=x.y
|EWhumiditydiff=999.0
|A humidity change 'spike removal' filter, ''changes in read value''from any station greater than the value specified here (set in calibration screen of configuration menu) will be ignored by Cumulus
▲|-
▲|EWduplicatecheck=0
▲|Add this line to cumulus.ini [Station] section if application gets stuck in the download stage.
▲|-
▲|SyncFOReads=1
▲|Specifies the Fine Offset synchronisation mode of operation.
▲*0 = default
▲*1 = Re-synchronizes each day
▲|-
▲|ReportLostSensorContact=0
▲|Option to turn off reporting of 'lost sensor contact' for Fine Offset stations. (added Cumulus 1.9.4 b1070)
▲*0 = reporting off
▲*1 = reporting on (default)
|}
| |||
