Cumulus.ini (preserving history): Difference between revisions

From Cumulus Wiki
Jump to navigationJump to search

Cumulus.ini (preserving history) (view source)

Revision as of 07:35, 7 September 2013

97 bytes added ,  7 September 2013
m
→‎Other weather station/instrument specific:: 'LogExtraSensors' tidied
m (→‎Other weather station/instrument specific:: WMR928TempChannel=N entry - add need to insert line into file)
|LogExtraSensors=0
|This is set in the settings frame on the Station settings screen off the configuration menu.
*0=Disabled (default)
Note this attribute appears under [[#Davis_family_specific|Davis]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset]] above with different explanations.▼
Set*1= thisEnabled to- 1Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from thethose sensors. You don't use this for Solar/UV sensors.
▲(Note this attribute appears under [[#Davis_family_specific|Davis]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset]] tables above with different usage explanations).
|-
|WMR928TempChannel=N
|This line needs to be added in the [Station] section of the Cumulus.ini. For WMR928WMR-928 stations (and other stations using the same protocol, eg WMR968WMR-968) to use an 'extra' channel (see previous parameter) as your main temperature sensor, set N to the required channel
|-
|WS2300Sync=1
Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/3014"

Navigation menu