5,838
edits
Cumulus.ini (preserving history): Difference between revisions
From Cumulus Wiki
Jump to navigationJump to search
m
→Oregon Scientific specific:: resequenced for better sense
m (→Introduced for problems with Fine Offset family:: SyncFOReads corrected to say set on settings screen) |
m (→Oregon Scientific specific:: resequenced for better sense) |
||
|
|style="background:lightgray;"|[Station]
|style="background:lightgray;"|Section name - the following parameters relate to the station configuration.
|-▼
|LogExtraSensors=0▼
|This is set in the settings frame on the Station settings screen off the configuration menu. ▼
*0=Disabled (default)▼
*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors.▼
(Note this attribute appears under [[#Davis_family_specific|Davis]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset]] tables above with different usage explanations).▼
|-
|Humidity98Fix=0
*0 = Disabled (default)
*1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98% or greater. Normally only useful for Oregon Scientific stations.
▲|-
▲|LogExtraSensors=0
▲|This is set in the settings frame on the Station settings screen off the configuration menu if extra channels are to be used.
▲*0=Disabled (default)
▲*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors.
▲(Note this attribute appears
|-
|WMR928TempChannel=N
|This line needs to be added in the [Station] section of the Cumulus.ini
|}
| |||
