5,838
edits
Cumulus.ini (preserving history): Difference between revisions
From Cumulus Wiki
Jump to navigationJump to search
Cumulus.ini (preserving history) (view source)
Revision as of 17:47, 2 September 2014
, 2 September 2014→Oregon Scientific specific:
m (→Davis family specific:: Set this in the Station Configuration Screen Settings block where called '''Synchronize station clock'''. When set, at Cumulus start-up and at 04:00 each day,) |
|||
|
|-
|LogExtraSensors=0
|This is set in the settings frame on the Station settings screen off the configuration menu
*0=Disabled (default)
*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors.
(Note this attribute appears in [[#Davis_family_specific|Davis family]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset family]] tables above and in [[Instromet_station_specific:|Instromet station specific:]] table below with different usage explanations).
|-
|WMR928TempChannel=N
| |||
