5,838
edits
Cumulus.ini (preserving history): Difference between revisions
From Cumulus Wiki
Jump to navigationJump to search
m
→Section: Display
|
=== Section: Display ===
{{Version badge 1}}Set the majority of these parameters using Configuration menu and [[Cumulus_Screenshots#Display_and_Colour_screens_as_at_version_1.9.4|either ''Display'' or ''Colours'' screens]] as seen on link and indicated below. The exception is "TwelveHourClock", that parameter is set by clicking on the displayed time.
The only settings used in this section by Cumulus MX are "NumWindRosePoints" and those for extras.
|-
|DisplayCloudBase=0
|{{Version badge 1}}Set in the Display Configuration Screen General block.
*0 = Disabled, (default)
*1 = Enabled, the calculated cloud base is displayed on the main screen. The calculation is a simple one; 1000 feet for every 4.5 degrees Fahrenheit difference between the temperature and the dew point.
|-
|DisplayHumidex=0
|{{Version badge 1}}Set in the Display Configuration Screen General block
*0 = Disabled (default) [[Heat_index]] displayed on main screen. The heat index is calculated only if the actual temperature in the shade (not in direct sunlight) is above 27 °C (80 °F), so normal temperature shown here for cooler temperatures.
*1 = Enabled, calculated [[Humidex]] value to be displayed on the main screen instead of Heat Index. (Note that Cumulus displays degrees C or F for Humidex, whereas strictly speaking it is unitless. This is for the convenience of those who use Fahrenheit but would still prefer to see Humidex displayed, where it might be confusing to show the unconverted value.)
|-
|DisplaySolarData=0
|{{Version badge 1}}Set by ''Display solar/extra data'' item in the Display Configuration Screen ''General'' block.
*0 = Disabled (default)
*1 = Enabled, adds an extra panel to the main screen below the recent extremes panel - EITHER
|-
|DisplayStormRain=0
|{{Version badge 1}}Set by ''Display 'Storm Rain' '' item in the Display Configuration Screen ''General'' block.
*0 = Disabled, (default)
*1 = Enabled, adds an extra output to the main screen to show what Davis stations report as Storm Rain
|-
|LegendSymbolWidth=3
|{{Version badge 1}}Set in the Display Configuration Screen Graph block. The width of the plot lines in graph legends
|-
|ChartLineWidth=2
|{{Version badge 1}}Set in the Display Configuration Screen Graph block. The width of the plot lines in the graph body
|-
|WindGaugeRange=50
|{{Version badge 1}}Set in the Display Configuration Screen General block. Value represents the default full scale deflection of the top of the 3 wind plots in the wind speed units you have selected. Default value is 50 in that unit.
|-
|WindGaugeArcColour=16773091
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeAnimated=1
|{{Version badge 1}}Set by ''Wind gauge animated'' item in the Display Configuration Screen ''General'' block. Animate the Wind Gauge pointer movement
*0 = Disabled,
*1 = Enabled (default)
|-
|WindGaugeAnimationFactor=2
|{{Version badge 1}}Set in the Display Configuration Screen. This sets the speed of the wind gauge animation. Lower values correspond to a faster animation speed. Be careful not to set the animation too slow, particularly with stations which update frequently (e.g. Davis) as the animation will never catch up, and will use significant CPU time.
|-
|WindGaugeTickColour=9841920
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeFontColour=9841920
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeInnerCircleColour=16765615
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeNeedleColour=128
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeInnerCentreColourFrom=16765615
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeInnerCentreColourTo=16765615
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterCentreColourFrom=16765357
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterCentreColourTo=16711680
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterCircleColour=16765615
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterRimColour=9470064
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeAverageSectorColour=32768
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugePeakSectorColour=33023
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeNeedleShineColourFrom=1049273
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|WindGaugeNeedleShineColourTo=328090
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the upper of the 3 wind plots
|-
|CompassColour=12632256
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the middle of the 3 wind plots
|-
|CompassTickColour=16711680
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the middle of the 3 wind plots
|-
|CompassLabelColour=16777215
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the middle of the 3 wind plots
|-
|CompassBearingColour=0
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the middle of the 3 wind plots
|-
|CompassCurrentPointerColour=255
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the middle of the 3 wind plots
|-
|CompassAveragePointerColour=16711680
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the middle of the 3 wind plots
|-
|WindRoseColour=8388608
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the wind rose shading that represents duration and intensity of wind in different directions
|-
|WindRoseLabelColour=0
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the wind rose compass points
|-
|WindRoseAxesColour=8388608
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the circle and radii of lower of the 3 wind plots
|-
|WindRoseTransparency=50
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu.
|-
|NumWindRosePoints=16
|-
|TransparentGauges=0
|{{Version badge 1}}Set by ''Transparent gauge backgrounds'' item in the Display Configuration Screen ''General'' block.
The square backgrounds of the three wind gauges on the Cumulus main screen
|-
|TransparentGraphs=0
|{{Version badge 1}}Set by ''Transparent graph backgrounds'' item in the Display Configuration Screen ''General'' block.
This only works if the graphs are defined to have a solid colour as background (gradient is not selected on ''colours'' configuration screen).
|-
|DigitBackground=0
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the colour to be used for background to displayed observations on main screen
|-
|LabelColour=0
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the Parameter labels on main screen - default black. Note alarm conditions can change label colour (see next 2 parameters).
|-
|AlarmColour=255
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the Parameter labels on main screen - default red - when an alarm is set for that parameter
|-
|PastAlarmColour=16711680
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the Parameter labels on main screen - default blue - when an alarm is cleared for that parameter
|-
|PanelHeadingFontColour=0
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the heading at the top of each panel with observations
|-
|PanelLineColour=0
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the heading at the top of each panel with observations
|-
|PanelBorderColour=8421504
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the edging of each panel with observations
|-
|PanelGradientColourFrom=16777215
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the panel background
|-
|PanelGradientColourTo=13226453
|{{Version badge 1}}Set on the colour setting screen in the Configuration menu. Decimal code for the panel background
|-
|DisplayBeaufortDesc=1
|{{Version badge 1}}Set in the Display Configuration Screen General block
*1 (default), the Beaufort description of the current average wind speed will appear in the header of the wind panel on the main screen.
*0, it will instead appear as a 'tool tip' for the wind panel.
|-
|DisplayBarometerTrendText=1
|{{Version badge 1}}Set in the Display Configuration Screen General block
*1 (default), the description of the current barometer trend will appear in the header of the barometer panel on the main screen.
*0, it will instead appear as a 'tool tip' for the barometer panel.
|-
|UpdateAtStartup=1
{{Version badge 1}}|Set in the Display Configuration Screen General block
*1 (default), the display will be updated as data is downloaded and processed from the station's logger. This increases the time taken to process the data.
*0, it makes the download faster as display is onlyn updated when catch up completed; this may be significant if there is a lot of data to download.
|-
|IndependentGraphsWindow=0
|{{Version badge 1}}Set in the Display Configuration Screen Graphs block
*0 = Disabled (default)
*1 = Enabled
| |||
