5,838
edits
Cumulus.ini (preserving history): Difference between revisions
From Cumulus Wiki
Jump to navigationJump to search
m
→Section: Station
|
*0=Vantage Pro station
*1=Vantage Pro2 station
*2=WMR-928 station▼
Following added from version 1.7.0:
▲*2=WMR-928 station
*3=WM-918 station
For Oregon Scientific stations and similar re-badged stations (Huger, Radio Shack etc) which have a serial port connection, if your model is not listed, try WM-918 if your station has wired connections, and WMR-928 if it is wireless.
Added in version 1.7.12:
*4=Reading from file [[EasyWeather_Format#Usage_of_easyweather.dat_fields_for_Cumulus_input_of_latest_record: |EasyWeather.dat]] (using EasyWeather software version 6.2, or earlier, running continuously with Cumulus). Fine Offset weather stations that record Solar and UV measurements output to [[EasyWeather_Format#EasyWeatherPlus.dat| EasyWeatherPlus.dat file]] when Easyweather software version 6.x is running. This has the same fields as easyweather.dat, plus two extra fields for Solar and UV data at the end, and so Cumulus can understand the fields you must also have '''LogExtraSensors=1''' set.
'''NOTE:''' You can also use ''Type=4'' if you want to run Cumulus with reduced functionality without a weather station attached, to view historical observations. A full set of (historic) files in the ''data'' subfolder copied from a system with a weather station attached is needed, but in this case, the [[#Introduced for problems with Fine Offset family:| EWFile= ]] attribute should be at its default of not having any filename value.
Added in version 1.8.0:
*5=Fine Offset, Maplin, Chas Olsen, MyDEL, Nevada, Watson, Tycon Power, Aercus, etc as defined in [[Supported_Devices#Fine_Offset|Fine Offset section in Supported_Devices article]] (without solar measurement sensors (with or without solar recharging))
Added in version 1.8.3:
*6=WS2300 (For all La Crosse WS23xx models)
Added in version 1.9.2:
*7=Fine Offset/Watson/MyDel etc with Solar Sensors as defined in [[Supported_Devices#Fine_Offset_with_UV/Light sensor|Fine Offset with UV/Light sensor in Supported_Devices article]].
*8=[[WMR100-200_Protocol|WMR100]]
[[File:Badge vMx.png]]'''Additional values available in MX only:'''
Added in version 3.0.0:
*11=Davis WLL
Added in version 3.2.0:
*12=Ecowitt GW1000 and Froggit DP1500 (and any equivalents)
|-
| |||
