Cumulus.ini (preserving history): Difference between revisions

From Cumulus Wiki
Jump to navigationJump to search

Cumulus.ini (preserving history) (view source)

Revision as of 14:24, 10 April 2021

203 bytes added ,  10 April 2021
m
→‎Introduced for problems with Fine Offset family:
m (add warning to top of page)
*2 Minimum value
*3 = default value
Sets the interval (in seconds) during each 48 (or 60 for some models in Cumulus 1) second of station logging period when Cumulus will avoid reading the station data to try and minimise lock ups. If the clock drifts more than this value in 24 hours, then Cumulus may cause the station to lock up when reading the data. The actual station clock drift gets logged to the diags file when the re-synchronise (see last parameter) takes place, this will give an idea of whether it would be useful to adjust this setting.
 
Note: I have not been able to find any interval that works. In my experience, if you use this setting, MX skips every attempt to read from the weather station, As MX is coded to make an attempt every 60 seconds, but is also coded to skip every 60 seconds plus or minus the setting here.
 
MX applies both 48 and 60 second avoidances regardless of model.
Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/8398"

Navigation menu