5,838
edits
Cumulus.ini (preserving history): Difference between revisions
→Section: Display: add "Display Storm Rain", "Transparent Graphs"
m (→Davis family specific:: Rewritten to be clearer) |
(→Section: Display: add "Display Storm Rain", "Transparent Graphs") |
||
|
== Section: Display ==
Set the majority of these parameters using Configuration menu and [[Cumulus_Screenshots#Display_and_Colour_screens_as_at_version_1.9.4|either ''Display'' or ''Colours'' screens]] as seen on link and indicated below. The exception is "TwelveHourClock", that parameter is set by clicking on the displayed time.
{| class="wikitable" border="1"
|-
*0 = Disabled, (default) Forecast appears left justified on main screen below sun and moon details
*1 = Enabled, Forecast appears centred horizonatally on main screen below sun and moon details
|-▼
|ShowCurrentConditions=0▼
|Set in the Display Configuration Screen General block▼
*0 = Disabled, (default)▼
*1 = Enabled, a box labelled 'Current:' appears at bottom of Cumulus main screen. See [[Webtags_as_boolean_operators_in_HTML#Current_Weather_Conditions]] for possible use of this information, and [[Currentconditions.txt]] for the effect when the contents of the box on main screen changes.▼
|-
|FontColour=4227327
*0 = 24Hr clock mode
*1 - 12 Hr am/pm clock mode
|-▼
|DisplaySolarData=0 ▼
|Set by ''Display solar/extra data'' item in the Display Configuration Screen ''General'' block.▼
*0 = Disabled (default)▼
*1 = Enabled, adds an extra panel to the main screen below the recent extremes panel - EITHER▼
**Panel displays ''Temp'', ''Dew pt'' and ''Hum'' (this [[FAQ#How_does_Cumulus_deal_with_extra_sensors.3F|extra sensor data]], can be populated from Oregon WMR-928 stations, see next 3 parameters) OR▼
**Panel displays ''Evapotranspiration (ET)'', ''Ultraviolet (UV)'' and ''Solar radiation'' if station '''Type''' is Vantage Pro and solar data is available▼
|-
|WMR928Channel1Caption=Extra channel 1
|-
|SnowUnitText=cm
|Set in ''Snow units'' box in the Display Configuration Screen ''General'' block.
This allows you to set the text that appears with the snow depth in the weather diary. Note that there is no significance attached to this and the effect is purely cosmetic; the snow depth is effectively unitless and you can supply any text you wish, remember all snow depth observations must be entered as an integer (without any decimal part)!
|-
|DisplayCloudBase=0
*0 = Disabled (default) [[Heat_index]] displayed on main screen. The heat index is calculated only if the actual temperature in the shade (not in direct sunlight) is above 27 °C (80 °F), so normal temperature shown here for cooler temperatures.
*1 = Enabled, calculated [[Humidex]] value to be displayed on the main screen instead of Heat Index. (Note that Cumulus displays degrees C or F for Humidex, whereas strictly speaking it is unitless. This is for the convenience of those who use Fahrenheit but would still prefer to see Humidex displayed, where it might be confusing to show the unconverted value.)
▲|-
▲|DisplaySolarData=0
▲|Set by ''Display solar/extra data'' item in the Display Configuration Screen ''General'' block.
▲*0 = Disabled (default)
▲*1 = Enabled, adds an extra panel to the main screen below the recent extremes panel - EITHER
▲**Panel displays ''Temp'', ''Dew pt'' and ''Hum'' (this [[FAQ#How_does_Cumulus_deal_with_extra_sensors.3F|extra sensor data]], can be populated from Oregon WMR-928 stations, see next 3 parameters) OR
▲**Panel displays ''Evapotranspiration (ET)'', ''Ultraviolet (UV)'' and ''Solar radiation'' if station '''Type''' is Vantage Pro and solar data is available
▲|-
|DisplayStormRain=0
|Set by ''Display 'Storm Rain' '' item in the Display Configuration Screen ''General'' block.
▲*0 = Disabled, (default)
*1 = Enabled, adds an extra output to the main screen to show what Davis stations report as Storm Rain
|-
▲|ShowCurrentConditions=0
▲|Set in the Display Configuration Screen General block
*0 = Disabled, (default)
▲*1 = Enabled, a box labelled 'Current:' appears at bottom of Cumulus main screen. See [[Webtags_as_boolean_operators_in_HTML#Current_Weather_Conditions]] for possible use of this information, and [[Currentconditions.txt]] for the effect when the contents of the box on main screen changes.
|-
|LegendSymbolWidth=3
|-
|WindGaugeAnimated=1
|Set by ''Wind gauge animated'' item in the Display Configuration Screen ''General'' block. Animate the Wind Gauge pointer movement
*0 = Disabled,
*1 = Enabled (default)
|-
|TransparentGauges=0
|Set
The square backgrounds of the three wind gauges on the Cumulus main screen
*0= same colour as the main window background (default)
*1= the images will be processed to make the background colour transparent.
|-
|TransparentGraphs=0
|Set by ''Transparent graph backgrounds'' item in the Display Configuration Screen ''General'' block.
This only works if the graphs are defined to have a solid colour as background (gradient is not selected on ''colours'' configuration screen).
*0= Cumulus 1.x.x graphs colour is defined in ''graphs'' block on Colours Configuration screen (default)
*1= the graph images that Cumulus 1.x.x creates for upload to a web site will be processed to make the background colour transparent.
|-
|LogFTPErrors=1
| |||