Cumulus Wiki

Cumulus.ini (preserving history): Difference between revisions

Page Discussion

Cumulus.ini (preserving history) (view source)

Revision as of 17:59, 6 September 2013

388 bytes added ,  6 September 2013
m
→‎Section: FTP Site: Change 19 to 99 many places to reflect change in 1.9.3
m (→‎Section: Offsets: Clarify that multiplier affects rainfall rate too; Clarify offset too)
m (→‎Section: FTP Site: Change 19 to 99 many places to reflect change in 1.9.3)
|FTPRename=0
|Selected in the Internet Configuration screen ''Sites/Options tab'' Web Settings block
*0 = Disabled (default,)
*1 = Enabled, the new update is loaded using temporary names, files are renamed on the sever afterwards
|-
|DeleteBeforeUpload=0
|Selected in Internet Configuration Screen ''Sites/Options tab'' Web Settings block
*0 = Disabled (default)
*1 = Enabled, files are deleted from sever before the new update is loaded
|-
|-
|GraphHeight=300
|Graph height, default is 300 (pixels) - see previous parameter
|-
|GraphWidth=750
|Graph width, default is 750 (pixels) - see ResizeGraphs parameter
|-
|ImageFolder=
|-
|ExtraLocal[10-99]=
|Path and file name on local computer for alternate file #10 through #1999. These additional files can only be setselected viaby adding parameter lines to the configuration file, they are not visible in the Internet Configuration screen Files tab.
|-
|ExtraRemote[0-9]=
|-
|ExtraRemote[10-99]=
|Path and file name on web server for alternate file #10 through #1999. These additional paths/files can only be setselected viaby adding parameter lines to the configuration file, they are not visible in the Internet Configuration screen Files tab.
|-
|ExtraProcess[0-9]=0
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) extra file will not pass through the cumulus 'tag processor'.
*1 = Enabled, extra file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that.
|-
|ExtraProcess[10-99]=0
|Set in this config file only.
*0 = Disabled, alternate file #10 through #99 will not pass through the cumulus 'tag processor'.
*1 = Enabled, alternate file #10 through #99 will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary[0-9]=0
|ExtraBinary[10-99]=0
|Set in this config file only.
*0 = alternate file #10 through #99 not binary (e.g. HTML file)
*1 = alternate file #10 through #99 is Binary (e.g. images)
|-
|ExtraRealtime[0-9]=0
|ExtraRealtime[10-99]=0
|Set in this config file only. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, alternate file #10 through #99 uploaded as part of normal upload
*1 = Enabled, alternate file #10 through #99 uploaded during Realtime upload
|-
|ExtraFTP[0-9]=1
|ExtraFTP[10-99]=1
|Set in this config file only.
*0 = Disabled, Filealternate file #10 through #99 copied to the location specified in the Remote Filename box.
*1 = Enabled, Filealternate uploadedfile #10 through #99 uploaded by FTP
|-
|ExternalProgram=
|-
|MaxFTPconnectRetries=3
|Set in this config file only. Allow configurable max FTP connect retries (default is retry up to 3 times)
|}
 
Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/3006"