5,838
edits
Cumulus.ini (preserving history): Difference between revisions
m
→Section: Offsets
|
== Section: Offsets ==
Set most of these parameters using the '''Configuration''' menu and ''Calibration'' screen,
{| class="wikitable" border="1"
|-
|-
|PressOffset=Offset_Value
|Default 'Offset_Value' is 0 in this parameter, used for formula: Cumulus pressure = Measured Pressure + 'Offset_Value'
|-
|TempOffset=Offset_Value
|Default 'Offset_Value' is 0 in this parameter, used for quadratic formula
|-▼
|TempMult=1 ▼
|
For formula see next item.
|-
|TempMult2= multiplier
|This line needs to be added in the [Offsets] section of the Cumulus.ini, if it is omitted default multiplier is 1.0.
"Second order" multiplier by which measured outdoor Temperature is to be corrected, this means that the logged reading can be (TempMult2 * measured-temp * measured_temp) + (TempMult * measured_temp) + TempOffset
|-
|HumOffset=Offset_Value
|WindGustMult=1
|Multiplier by which measured [[Wind_measurement#Wind_Speed|Wind Gust]] Speed is to be corrected (default=1).
▲|-
▲|TempMult=1
▲|Multiplier by which measured Temperature is to be corrected (default=1).
|-
|HumMult=1
| |||