5,838
edits
Cumulus.ini: Difference between revisions
m
→Data Logging
m (→Data Logging) |
|||
|
!style="width:20px" | Default
!style="width:600px" | Description
|-▼
| StartDate=▼
| (with warning: "Here be dragons!")▼
| Station Settings → Advanced Options▼
| Records Began date▼
| (Set when you first use Cumulus)▼
| Format used is determined by locale used for running MX. If this date is edited, keep to same format. MX generally (see [[Calculate_Missing_Values#CreateMissing.exe]] for exceptions) ignores any data file entries prior to this date.▼
|-▼
| NoSensorCheck=0▼
| (not yet on a settings page)▼
| (not known)▼
| (not known)▼
| 0 (normal)▼
| Boolean:▼
* 0 = MX will stop if any of the minimum set of sensors listed below fails▼
* 1 = MX will continue to run, even if any of the minimum set of sensors listed below fails▼
Minimum set of sensors:▼
# Current air temperature▼
# Current Relative Humidity▼
# At least one wind speed▼
# Current air pressure (absolute or sea-level)▼
Cumulus will stop processing any information from a weather station unless the above 4 source values are being supplied and reveal they are being updated (failure is set is after a total of 6 unsuccessful consecutive attempts to read each of these).▼
|-▼
| UseDataLogger=1▼
| (probably determined by station type)▼
| (not known)▼
| (not known)▼
| 1 (enabled)▼
|Simple tick or not▼
* Tick (value shown as 1 in Cumulus.ini) if your weather station has its own storage, so MX can do a catch up when it first starts and read any "archive data"▼
* Don't tick (value shown as 0 in Cumulus.ini) if your weather station has no storage, and therefore MX cannot capture any readings when it is not running▼
|-
| DataLogInterval=2
* Tick (value shown as 1 in Cumulus.ini) if your weather station can output readings to be logged in [[Extra Sensor Files]]
* Don't tick (value shown as 0 in Cumulus.ini) if you have nothing to log to Extra Sensor Files.
▲|-
▲| NoSensorCheck=0
▲| (not yet on a settings page)
▲| (not known)
▲| (not known)
▲| 0 (normal)
▲| Boolean:
▲* 0 = MX will stop if any of the minimum set of sensors listed below fails
▲* 1 = MX will continue to run, even if any of the minimum set of sensors listed below fails
▲Minimum set of sensors:
▲# Current air temperature
▲# Current Relative Humidity
▲# At least one wind speed
▲# Current air pressure (absolute or sea-level)
▲Cumulus will stop processing any information from a weather station unless the above 4 source values are being supplied and reveal they are being updated (failure is set is after a total of 6 unsuccessful consecutive attempts to read each of these).
▲|-
| RainDayThreshold=-1
▲| (with warning: "Here be dragons!")
| legacy cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings → Common Options → Advanced options
|-1 (that represents 0.2 mm or 0.01 inches)
| The amount of rainfall that must be collected before MX treats today as a wet day
''The intention is this will represent more than one tip,as the first tip might contain some rain from an earlier day''
|-
| RolloverHour=0
* 0 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches midnight
* 1 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time
▲|-
| SnowDepthHour=0
| (with warning: "Here be dragons!")
| legacy cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings → Common Options → Advanced options
| Snow depth hour
| 0 (midnight)
| Spin selector of 0 to 23: Defines hour from which entries in [[Weather Diary]] for current calendar day are used. Prior to this hour the weather diary will be searched for Calendar yesterday
|-
▲| StartDate=
| (with warning: "Here be dragons!")
▲| Station Settings → Common Options → Advanced Options
▲| Records Began date
▲| (Set when you first use Cumulus)
▲| Format used is determined by locale used for running MX. If this date is edited, keep to same format. MX generally (see [[Calculate_Missing_Values#CreateMissing.exe]] for exceptions) ignores any data file entries prior to this date.
|-
▲| UseDataLogger=1
▲| (probably determined by station type)
▲| (not known)
▲| (not known)
▲| 1 (enabled)
▲|Simple tick or not
▲* Tick (value shown as 1 in Cumulus.ini) if your weather station has its own storage, so MX can do a catch up when it first starts and read any "archive data"
▲* Don't tick (value shown as 0 in Cumulus.ini) if your weather station has no storage, and therefore MX cannot capture any readings when it is not running
|-
| Use10amInSummer=1
| |||