Category:Diagnostics: Difference between revisions

← Older edit

Category:Diagnostics (view source)

Revision as of 14:08, 19 August 2021

303 bytes added , 19 August 2021

m

→‎Turning debugging log on/off: update for 3.4.4

Sfws

5,838

edits

Revision as of 12:02, 24 January 2021 (view source) Sfws (talk \| contribs) m (→‎Debugging in Cumulus 1) ← Older edit		Latest revision as of 14:08, 19 August 2021 (view source) Sfws (talk \| contribs) m (→‎Turning debugging log on/off: update for 3.4.4)
(9 intermediate revisions by the same user not shown)
By default, logging of debugging information is disabled. Restarting Cumulus (1, 2, or MX) will normally (you can manually change this) ~~turn~~mean the debug log is off (because it is automatically turned off as Cumulus exits) Logging of debugging information can be enabled as Cumulus is started (see instructions below for your flavour) or at some point while it is running (except earliest builds) {{Version badge 1}}Cumulus 1.x.y: Depending on which version of Cumulus 1 you are using there is either one or two ways of turning logging of debugging data on and off: The only way to turn on the logging of debugging messages in all builds of Cumulus 1, is to stop Cumulus 1, edit the [[Cumulus.~~ini~~ini_(Cumulus_1)#Section:_Station\|Cumulus.~~ini~~ini_(Cumulus_1) configuration file]], and add a line in the [Station] section: <tt>Logging = 1</tt>, then restart Cumulus 1. * From build 1003 onwards, you can also turn it on/off using the '''Configuration''' menu (debug option is included in drop down of that menu). [[File:Badge vMx.png]]Cumulus MX: There are three ways to '''turn on the logging''' of debugging messages in all versions of Cumulus MX: # Close Cumulus MX, then edit [[Cumulus.~~ini~~ini_(Cumulus_1)#Read-Write_parameters_in_the_Station_section\|Cumulus.~~ini~~ini_(Cumulus_1) configuration file]], and add a line in the [Station] section: <tt>Logging = 1</tt>, then restart Cumulus MX. # When you start Cumulus MX, from Version 3.4.4 - Build 3068, you can use [[~~Cumulus_MX~~MX_on_Linux#~~Parameter_for_adding_debugging\|Parameter for adding debugging~~-debug_parameter_for_adding_debugging]] as part of the command for starting # Use the [[MX_Administrative_Interface#Changing_Settings\|admin interface Settings menu]], ~~next ''tick'' the 'Debug Logging' menu option, and finally click '''Save''', on~~selecting the appropriate web page depending on which version of MX you are using (see below). Here you can next ''tick'' the 'Debug Logging' menu option. You can untick the option to disable the logging of debugging information. Whenever you make a change on this page, it does not take effect until you click '''Save'''. #* [[MX_Administrative_Interface#Program_Settings\|'''Program settings''']] web page for version 3.9.4 - build 3099 onwards #* [[MX_Administrative_Interface#Station_Settings\|'''Station settings''']] web page for ~~earlier~~releases MX3.3.0 ~~versions~~to 3.9.3 = Further details = == Debugging in Cumulus MX == Please see [[~~MXDiags~~MXdiags_folder\|MX Diagnostics article]] == Debugging in Cumulus 1 == Please see ~~both~~all these pages: [[Bugreport.txt]], [[Debug.log]], and [[Diags_folder]] ~~articles~~. [[Category: Cumulus Files‏‎]]